Operation Manual

23
Channel Organizer
Lock
When the service is locked, you must enter your PIN whenever you tune to the service.
①
Press ▲/▼ to select the desired service.
②
Press 1 on the remote control. If you already set the PIN, enter it here. If not, enter the
factory preset PIN “0000”.
An icon displays indicating the service is locked.
Pressing 1 will turn the lock icon on and off. (PIN entry is required.)
③
Press DIGITAL MENU to save the setting.
•
Skip
Services that are set to skip will not be picked up when pressing CH
/ .
①
Press ▲/▼ to select the desired service.
②
Press 2 on the remote control. An icon displays indicating the service to be skipped.
Pressing 2 will turn the skip icon on and off.
③
Press DIGITAL MENU to save the setting.
To view services that are set to be skipped, use 0-9 or select from the Channel List.
••
Go To
Use this function to jump to the specific service in one step. This is useful when there are
many services displayed on screen to scroll through.
①
Press 3 on the remote control. Now you can change the service number on the left
side of the screen.
②
Enter the number using 0-9, and then press ENTER. The highlight moves to the
selected service.
Delete
Delete the selected service(s) from the memory.
①
Press ▲/▼ to select the desired service.
②
Press 4 on the remote control. An icon displays indicating the service to be deleted.
Pressing 4 will turn the delete icon on and off.
③
Press DIGITAL MENU to save the setting. A confirmation message displays.
④
Press ◀/▶ to select “Yes”, and then press ENTER.
•
Rename
Change individual service names.
①
Press ▲/▼ to select the desired service.
②
Press 5 on the remote control. A character set screen displays.
③
Press Yellow button to enter a new name for the service.
Press ▲/▼/◀/▶ to move the cursor, then press ENTER to confirm the input of a
character.
④
Press DIGITAL MENU to save the setting. A confirmation message displays.
⑤
Press ◀/▶ to select “Yes”, and then press ENTER.
•
Move
Sort the order of the selected service by moving the service position.
①
Press ▲/▼ to select the desired service.
②
Press 6 on the remote control. An icon displays indicating the service to be moved.
Pressing 6 will turn the move icon on and off.
③
Move the selected service to the desired position using ▲/▼, and then press ENTER
to register the change.
•
Change No. *
Change service number.
①
Press C/D to select the desired service.
②
Press 7 on the remote control. Now you can change the service number on the left
side of the screen.
③
Enter the number using 0-9, and then press ENTER.
You cannot enter the same service number with other one.•
Move To *
Sort the order of the selected service by modifying the service number.
①
Press ▲/▼ to select the desired service.
②
Press 8 on the remote control. Now you can change the service number on the left
side of the screen.
③
Enter the number using 0-9, and then press ENTER. The service moves to the new
position.
Note:
* If on the “AUTO INSTALLATION(COUNTRY)” screen “UK” is selected, “Change No.” and “Move To” cannot
be used in U.K.
Setting details
52R0131A_ENG.indd 2352R0131A_ENG.indd 23 4/3/09 11:08:33 AM4/3/09 11:08:33 AM