Printer User Manual
Table Of Contents
- Preface
- CONTENTS
- OVERVIEW
- PRINTING FROM WINDOWS
- Before Using the Printer Driver
- Printing from an Application
- Setting Up Print Options
- Printing with the Best Functions for Your Needs
- PRINTING FROM MACINTOSH
- PRINTING FROM UNIX/Linux
- MANAGING PRINT JOBS FROM THE CONTROL PANEL
- OTHER PRINTING METHODS
- APPENDIX
- INDEX
2.PRINTING FROM WINDOWS
Setting Up Print Options 33
2 PRINTING FROM WINDOWS
3) Margin - Center
This option sets the gutter in the center of a two sided page. You can enter up to 0.50 inches (12.70 mm). The printed
images will be reduced according to the margin setting.
4) Margin - Outer
This option sets the gutter on the right side and left side on the paper. You can enter up to 1.00 inch (25.40 mm). The
printed images will be reduced according to the margin setting.
5) Units
Select the unit for the Center Margin and Outer Margin options. The default unit varies depending on the regional
setting in Windows.
6) Staple Down the Center
Select this check box to double staple in the center.
[Staple Down the Center] is available only when [A5 on A4], [A4 on A3], [B5 on B4], [Letter - Half on Letter], [LT on
LD], or [1/2 LG on LG] is selected at the [Output Document Layout] box and the Saddle Stitch Finisher (optional) is
installed.
7) [Restore Defaults]
Click this button to restore the settings displayed in the [Booklet Details] dialog box to the original factory defaults.
For the detailed instructions on how to print with the [Booklet] setting, see the following page:
P.65 “Making a booklet”