Operation Manual

English
24
CONTROLS AND FEATURES
Analogue Channel Fine Tune
When the reception is poor, you can use this
function to do the ne tuning.
In the SETUP menu, press ▼ to highlight
Channels and press ► or
to enter.
Press ▼ to highlight Analogue Channel
Fine Tune and press
to enter.
Highlight and press to select the
channel.
4
Press ◄ or ► to adjust the frequency.
Press ◄ to decrease and ► to increase
the frequency.
Analogue Channel Fine Tune
BackSelectAdjust
OK
Exit
EXITRETURN
1
2
3
4
5
6
7
8
9
BBC 1
RTP1
-----
-----
-----
-----
-----
-----
-----
10 -----
687.25 MHz
175.25 MHz
55.85 MHz
209.25 MHz
223.2 MHz
572.3 MHz
590.25 MHz
623.25 MHz
759.2 MHz
772.2 MHz
Clean Channel List
This feature cleans all the TV channels while your
channel list is not empty.
In the SETUP menu, press ▼ to highlight
Channels and press ► or
to enter.
Press ▼ to highlight Clean Channel List
and press ► or
to enter.
Auto Scan
Update Scan
Single RF Scan
Favorite Network Select
Channel Skip
Channel Sort
Channels
Clean Channel List
Select Back Exit
EXIT
Enter
OK RETURN
Channel Edit
The Clean Channel List screen appears.
Press
to clean now.
Previous settings will be lost ! Press Cancel for no
change. Press OK to continue.
OK Cancel
Common Interface
This function enables you to watch some pay
services (encrypted services). When the module
is inserted into the CI slot, you can access the
module menu. To purchase a module and smart
card, contact your dealer. Common Interface
functions may not be possible depending upon
the country broadcasting circumstances.
Press MENU and press ◄ or ► to select
APPLICATIONS.
Press ▼ to highlight Common Interface
and press ► or
.
Press to select the CI card to view the
Module information.
Reset TV
Selecting Reset TV will reset all TV settings to
their original factory values, excludes Country,
OSD Language, and Channels.
In the SETUP menu, press ▼ to highlight
Reset TV and press ► or
to enter.
Select OK to conrm or select Cancel to
exit.
Automatic Power Down
The TV will automatically turn itself off (standby)
after approximately 4 hours, if you do not touch
the control buttons on the remote control or on
the TV control panel.
In the SETUP menu, press ▼ to highlight
Automatic Power Down.
Press ◄ or ► to select On or Off.