Operation Manual

6
Location of controls
Description of Indicators and Controls
1. Remote sensor
2.
(Power) indicator: The LED indicator lights up red in standby mode, orange in standby mode
when the timer is activated, and green in the power ON mode.
3. Loudspeakers
4.
(EJECT): Eject a disc.
5.
(Volume) +/– buttons / In Menu: Setting.
6.
(Channel) /PLAY ( ▶ ) button: Press to change to a higher numbered channel set into
memory. DVD mode : Playback. In Menu: Setting. In Standby: Turning on the unit.
7.
(Channel) /STOP (■) button: Press to change to a lower numbered channel set into
memory. DVD mode : Stop. In Menu: Setting. In Standby: Turning on the unit.
8. MENU button: To display the analogue menu screen.
9.
(INPUT SELECT) button: Select input mode. In Menu : Using as ENTER button.
10.
(TV) button: Preparation: Connect power-cable to 230V/50Hz.
a) If standby-LED is red, you may turn-off. To turn-off, press TV button 1x and release.
For confirmation, standby-LED will turn off.
b) If standby-LED is off, you may turn-on. To turn-on, press TV button 1x and release.
For confirmation, standby-LED will change to red and about 1 second later to green.
c) If the TV is currently working, press TV button 1x and release to turn-off.
For confirmation, standby-LED will turn off.
In TV-off-condition, the unit cannot be turned-on by pressing
on the remote control.
In TV-off-condition, the TV’s power-consumption is approx. 1 Watt.
If total disconnection from the mains power is required, please unplug the mains lead.
Disc slot
4
3
1
2
5
6
8
9
10
7
Adjusting the angle of the base (except 26DV615DG)
You can adjust the angle of the TV-screen for 3° forward or for 10° backward from vertical angle.
Hold the base of the TV while adjusting the angle.
52R0131A_ENG.indd 652R0131A_ENG.indd 6 4/3/09 11:08:10 AM4/3/09 11:08:10 AM