System information

55
English
Input Selection and AV Connections
Use the Input Selection feature if the television does not switch over automatically when using an
external device.
Lip Sync Mode
This option activates an auto audio/video
display timing adjustment function that allows
HDMI source devices to accurately perform
synchronization automatically.
All of the above HDMI settings require a proper
HDMI source device.
If HDMI source products do not support these
functions, the TV may not work properly when
activating these functions.
NOTE:
• In a non-HDMI signal mode, this
function is not available.
• In your HDMI connection is capable
of 1080p and/or your TV is capable
of refresh rates greater than 60Hz or
supports Deep Colour, you will need
a Category2 cable. Conventional
HDMI/DVI cables may not work
properly with this mode.
Input Signal Selection
You can select source of AV or S-VIDEO from
this function.
In the AV connection menu, press ▲ or
▼ to select EXT1 input.
Press ◄ or ► to select AV or S-VIDEO.
AV connection
HDMI1 audio
Lip Sync
EXT1 input
Auto
On
AV
Edit Back
RETURN
HDMI1 Audio
If the connected HDMI source does not support
digital audio, plug the audio cable into PC/HDMI 1
(AUDIO) on the back of the television (as shown
in the “Connecting an HDMI or DVI device to the
HDMI input” section), then use the HDMI 1 Audio
setting.
Press MENU. Press ◄ or ► to select
SETUP and press to enter the sub-
menu.
PICTURE SOUND
SETUP
APPLICATIONS PREFERENCES
Press ▲ or ▼ to select AV connection,
and press to enter the submenu.
Press ▲ or ▼ to select HDMI1 audio,
press ◄ or ► to select Auto, Digital or
Analogue.
AV connection
HDMI1 audio
Lip Sync
EXT1 input
Auto
On
AV
Edit Back
RETURN
NOTE: The Lip Sync function is only available in
HDMI mode.