32AV83*G 32/40LV83*G 26/32EL83*G 32/42HL83*G DIGITAL Series
English Contents Safety Precautions.....................5 Tuning the Television.................21 Air Circulation....................................... 5 Quick Setup.......................................... 21 Heat Damage....................................... 5 Setting the Channels..................23 Mains Supply........................................ 5 Auto Tuning.......................................... 23 Do......................................................... 5 Do not...............
Bass Boost........................................... 32 SPDIF Type.......................................... 32 Play Video Files.................................... 44 Audio Description................................. 33 Repeat Settings.................................... 45 Widescreen viewing...................34 Set ....................................................... 45 Slow Forward....................................... 45 Available Picture Size and Position Control...........................
English Setting the Modes................................ 53 Navigating Pages using Auto............... 53 Navigating Pages using LIST............... 53 Control Buttons.................................... 53 PC Settings.................................54 Horizontal and Vertical Position........... 54 Horizontal Width................................... 54 Clock Phase......................................... 54 Reset.................................................... 54 Input Selection and AV Connections.
This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products and some points may not apply to the goods you have just purchased. The Class I apparatus shall be connected to a mains socket outlet with a protective earthing connection.
English Installation and important information Where to install Locate the television away from direct sunlight and strong lights, soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen. Place the TV set on a stable, level surface that can support the weight of the TV. As an additional safety measure you secure the TV to the level surface or a wall, as shown in the illustration, using sturdy strap.
2. Remove the screws. 3. Once you have removed all five screws holding the pedestal stand in place, remove the pedestal stand from the TV by sliding the pedestal stand away from the TV.
English The Remote Control 1 2 3 4 5 6 7 8 9 10 11 Simple at-a-glance reference of your remote control.
Before connecting any external equipment, turn off all main power switches. If there is no switch remove the mains plug from the wall socket. Connect the power cord into the AC-IN socket found at the back of the TV.
English Aerial cables: - - - - - - - - - - - - - - - - - - Connect the aerial to the ANT socket on the rear of the television. If you use a decoder and/or media recorder, connect through the decoder and/or media recorder to the television. SCART cables: - - - -- - - - - - - - - - - - - - Connect the video recorder IN/OUT or decoder TV socket to the television. Connect the media player SAT socket to the decoder MEDIA REC. socket. Before running Auto Tuning put your decoder and media recorder to Standby.
The basic functions of connected audio/video equipment can be controlled using the television’s remote control if a HDMI-LINK compatible device is connected.
English Connecting an HDMI or DVI device to the HDMI input The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI source device or uncompressed digital video from a DVI (Digital Visual Interface) source device. This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) programme material in digital form from EIA/CEA-861-D–compliant [1] consumer electronic devices (such as a set-top box or DVD player with HDMI or DVI output).
English HDMI device HDMI out HDMI cable (not supplied) For 32AV83*G | 32/40LV83*G To view the HDMI device video, press the button to select HDMI 1 or HDMI 2 mode.
English To connect a DVI device Connect an HDMI-to-DVI adapter cable (HDMI type A connector) to the HDMI 1 terminal and audio cables to the PC/HDMI1 (AUDIO) socket (see illustration). • The recommended HDMI-to-DVI adapter cable length is 6.6ft (2m). • An HDMI-to-DVI adapter cable transfers video only. • Separate analogue audio cables are required for audio receivers.
English Audio cable for HDMI to television connection (not supplied) HDMI-to-DVI adapter cable (not supplied) DVI device For 32AV83*G | 32/40LV83*G To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow these procedures: • When turning on your electronic components, turn on the television first, and then the HDMI or DVI device. • When turning off your electronic components, turn off the HDMI or DVI device first, and then the television.
English Connecting a Computer With either an RGB/PC or an HDMI connection, you can watch your computer’s display on the television and hear the sound from the televisions speakers. To connect a PC to the HDMI terminal When connecting a PC to the HDMI terminal on the television, use an HDMI-to-DVI adapter cable and an analogue audio cable. If connecting a PC with an HDMI terminal, use an HDMI cable (type A connector). A separate analogue cable is not necessary.
English the back of your television Computer HDMI-to-DVI adapter cable (not supplied) 2 Audio cable for PC to television connection (not supplied) For 32AV83*G | 32/40LV83*G For acceptable PC and video signal formats, see page 18. NOTE: • The edges of the images may be hidden. • If connecting a certain PC model with a unique PC signal, the PC signal may not be detected correctly.
English Acceptable Video signals through HDMI terminals Resolution H. Frequency (KHz) V. Frequency (Hz) 480i 15.734 60.000 480p 31.500 60.000 576i 15.625 50.000 576p 31.250 50.000 720p 37.500 50.000 720p 45.000 60.000 1080i 28.125 50.000 1080i 33.750 60.000 1080p 27.000 24.000 1080p 28.125 25.000 1080p 33.750 30.000 1080p 56.250 50.000 1080p 67.500 60.
While all the necessary adjustments and controls for the television are made using the remote control, the buttons on the television may be used for some functions.
English Switching On If the RED LED is unlit check that the plug is connected to the power supply. If the picture does not appear press on the remote control, it may take a few moments. To put the television into Standby press on the remote control. To view the television press again. The picture may take a few seconds to appear. Using the Remote Control To set up the television you will now need to use the on screen menus. Press MENU on the remote control to see the menus.
English Tuning the Television Before switching on the television put your decoder and media recorder to Standby if they are connected. To set up the television use the buttons on the remote control as detailed on page 8.
English When Store is selected, the confirmation window appears. Location You have selected [Store]. This mode consumes more energy. Are you sure you want to set to this mode? No Select OK Auto tuning RETURN Back Press ◄ or ► to select Yes or No. Press to enter the Auto tuning menu. NOTE: Please make sure the aerial is connected to the TV before tuning. Auto tuning Previous settings will be lost ! Press EXIT for no change.
English Setting the Channels Note: When Parental Block is activated, the 4-digit password is needed. Auto Tuning Press ▲ or ▼ to select Start Scan and press to start Auto Tuning. The Auto tuning function will completely retune the television and can be used to update the channel list. Auto tuning NOTE: It is recommended that Auto tuning is run periodically to ensure that all new services are added.
English Manual Tuning Press ▲ or ▼ to select Tuning Mode and press ◄ or ► to select ATV, DTV or ATV and DTV. There are two TV modes: ATV and DTV that can be tuned-in manually using Manual Tuning. Auto tuning ATV mode - Antenna/Cable Previous settings will be lost! Press EXIT for no change. Tuning Mode Start Scan Scan type Start Frequency (MHz) End Frequency Modulation Symbol Rate Network ID Press MENU. Press ◄ or ► to select SETUP and press to enter the submenu. ATV and DTV OK Quick Scan 113.
Press MENU. Press ◄ or ► to select SETUP and press to enter the submenu. Press ▲ or ▼ to select DTV Manual Tuning and press to enter the submenu. ATV Manual Tuning Manual fine tuning 1 BG P Select A B C 69 Change C 0 OK Save D E F G − − − − − RETURN Back H I A Position: The number to be pressed on the remote control. B System: Specific to certain areas. C Colour system: Factory set to Auto, should only be changed if problems are experienced, i.e. NTSC input from external source.
English Automatic Power Down DTV mode - Cable Press MENU. Press ◄ or ► to select SETUP and press to enter the submenu. The TV will automatically turn itself off (standby) within 4 hours, if you do not touch the control buttons on the remote control or on the TV control panel. It will also automatically turn off if no input signal is detected after approximately 15 minutes. Press ▲ or ▼ to select DTV Manual Tuning and press to enter the submenu.
English DTV Settings Re-number Channels The channel order may be changed to suit your personal preference. Press the button on the remote to renumber the highlighted channel. NOTE: This function is only available in DTV mode. Edit the channel number using the number keys on the remote and press . Press MENU. Press ◄ or ► to select SETUP and press to enter the submenu.
English Sort Press ◄ or ► to highlight the skip ( ) box. Press p or q to select the desired channel and then press . A tick icon appears. Channels Position 803 804 805 806 807 273 Channel Options CH 800 TV Name Rossia 1 Rossia 24 NTV TRK 5 kamal Bibigon Service Information Radio Three OK Store Select Press box. RETURN Back Channels In the DTV Settings menu, press ▲ or ▼ to select Channel Options, and press to enter the submenu. Press ◄ or ► to highlight the lock ( ) box. Press to select.
Parental You can choose the Subtitle Type or Audio Type from Normal or Hearing Impaired. If the Hearing Impaired is selected, it provides subtitle services to deaf and hard of hearing viewers with additional descriptions. Subtitle Language or Audio Language allow a programme or film to be viewed with a choice of soundtrack language, provided they are currently being broadcast. This function blocks channels or programmes that you do not want to or that you do not want your children to watch.
English Digital On-Screen Information and Programme Guide When viewing in digital mode, the on-screen information and programme guide provide access to programme details for all available channels. Information On-Screen Information Icons Icons will appear on the Information screen giving details about the programmes being broadcast. Details of these icons are listed below: Press , and the information screen will appear giving details of the channel and programme currently being viewed.
English General Controls The General Controls will allow you to select channels and information, use the sound controls, personalise the picture style, and select external equipment. Selecting Channels Subtitles To select a channel use the numbered buttons on the remote control. Channels can also be selected using P and P . If Subtitles are available for your current programme, pressing the SUBTITLE button will toggle Subtitles on or off.
English Sound Controls Volume Controls and Mute Sound Volume Press or Stable Sound The Stable Sound feature limits high volume levels in order to prevent the extreme changes in volume that can occur when channels are changed or a programme switches to a commercial. to adjust the volume. Sound Mute Press on the remote once to turn the sound off and again to cancel. Press MENU. Press ◄ or ► to select SOUND and press to enter the submenu.
English Audio Description Audio Description is an additional narration describing on-screen action, body language, expressions and movements for people with visual disabilities while watching the TV. This function enables you to choose the type of narrations. Press MENU. Press ◄ or ► to select SOUND and press to enter the submenu. Press ▲ or ▼ to select Audio Description and press to enter the submenu. Press ▲ or ▼ to select Audio Description, and press ◄ or ► to select On or Off.
English Widescreen viewing Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats. Wide 4:3 Super Live Use this setting when watching a widescreen DVD, widescreen video tape or a 16:9 broadcast (when available). Due to the range of widescreen formats (16:9, 14:9, 20:9 etc.) black bars may be visible on the top and bottom of the screen. Use this setting to view a true 4:3 broadcast.
English Available Picture Size and Position Control Wide 4:3 Super Live Cinema Subtitle 14:9 Native Normal Dot by Dot o o o o o o x x x SD o o o o o o x x x HD o o o o x o o x x Scart o o o o o o x x x CVBS o o o o o o x x x ATV DTV SD o o o o o o x x x HD o o o o x x x x x SD o o o o o o o x x HD o o o o x x o x x D-SUB o x x x x x x o o DVI o x x x x x x o o YPbPr HDMI 35
English Picture Controls Most of the picture controls and functions are available in both digital and analogue modes. Note: Features not available will be greyed out. Picture Position Picture Mode The Picture Position may now be adjusted to suit personal preference. You can adjust the picture appearance by selecting the preset value in picture mode based on the programme category. Press MENU. Press ◄ or ► to select SETUP and press to enter the submenu. PICTURE SOUND SETUP APPLICATIONS Press MENU.
The static gamma feature allows you to adjust the levels of black in the picture. This function increases the strength of dark areas of the picture, which improves picture definition. In the Picture Settings menu, press ▲ or ▼ to select Static Gamma. In the Picture Settings menu, press ▲ or ▼ to select Black/White Level. Press ◄ or ► to select the number of Static Gamma (-5~+5). Press ◄ or ► to adjust the level from Off, Low, Middle to High.
English Base Colour Adjustment MPEG NR – Noise Reduction When watching a DVD, the compression may cause some words or picture elements to become distorted or pixelated. Using the MPEG NR feature reduces this effect by smoothing out the edges. The Base Colour adjustment feature allows the adjustment of individual colours to suit personal preference. This can be useful when using an external source. It only can be adjusted when 3D Colour management is set to On.
English Enjoy Photos through USB Port The Photo Viewer allows you to playback image files from a USB storage device. Image JPEG PNG Photo Resolution (Mstat suggest) Required DRAM size (Mbytes) Remark Base-line 15360x8704 (1920x8x1088x8) 3.96 Depends on RAM size Progressive 1024x768 6.00 non-interface 9600x6400 3.66 interface 1200x800 3.66 9600x6400 3.
English Press ▲, ▼, ◄ or ► to select the desired photo and press to view. Set Interval Time Press MENU to change the settings when viewing a photo. Press MENU to change the settings when viewing a photo. Press ◄ or ► to select and press to select the desired interval time (3/5/10/15/30/60/90 Sec). NOTE: If Repeat is On, Slide Show starts photo viewing from the first photo in the folder after reaching the final photo. Off On Using the Play List 15 sec 00001 / 00004 0000−1.
English Enjoy Music through USB Port The MP3 Player allows you to playback music files from a USB storage device. Audio Codec File Extension Bit Rate MPEG1 Layer2 MP3 32Kbps~ 448Kbps(Bit rate) 32KHz ~ 48KHz(Sampling rate) MPEG1 Layer3 MP3 32Kbps ~ 320Kbps(Bit rate) 32KHz ~ 48KHz(Sampling rate) Play Music Files Remark Press ▲ or ▼ to select the desired music and press to play. Insert a USB storage device and press on the remote. Use ▲ or ▼ to select MEDIA and press .
English Repeat Settings Press ◄ or ► to select Press . to select Off, One or Folder. Using the Play List Press ◄ or ► to select and press . Press ▲ or ▼ to select music and press to play music. Press EXIT on the remote to collapse the list. 001.MP3 002.wma 003.avi 1/1 Off 00:00:02 / 00:02:42 00001 / 00003 001.MP3 16 Play List P Page MOVE OK Select EXIT EXIT Music Info Info display file status information (content number, music title, Bit Rate, Artist, Sampling, Year, and size).
English Enjoy Videos through USB Port The Video Viewer allows you to playback video files from a USB storage device. File Extension Container MPG, SPEC Bit Rate (Mbit/sec) Mpeg1,2 1080P@ 30fps 20 Main Profile Video Codec Profile dat, mpg, mpeg MPEG ts, trp, tp, m2ts MPEG2 -TS H264-TS MPEG2 ,H.264 1080P@ 30fps 20 H264: Main Profile and High Profile @Level 4.0 MPEG2: MP@HL vob MPEG2 -PS MPEG2 1080P@ 30fps 20 MPEG2: MP@HL MPEG4 Xvid 1.00, Xvid 1.01, mp4 AVI, MP4 Xvid 1.02, Xvid 1.
English Play Video Files Press MENU to change the settings when viewing a video. Insert a USB storage device and press on the remote. Use ▲ or ▼ to select MEDIA and press . Play Inputs TV 1 2 3C HDMI1 HDMI2 MEDIA PC Off 00:00:08 / 00:02:28 00001 / 00001 002.wmv MOVE • USB 2.
English Repeat Settings Video Info Press MENU to change the settings when playing a video. Info display file status information (content number, video title, audio track, subtitle, program, size, etc.). Press ◄ or ► to select and press to select Off, One or Folder. Press MENU to change the settings when playing a video. Set Press ◄ or ► to and press . Press MENU to change the settings when playing a video. Press ◄ or ► to select and press to select Set A, Set B or None. 27.
English HDMI-LINK Controls This feature uses CEC (Consumer Electronics Control) technology, and allows the control of Toshiba HDMI-LINK compatible equipment from the television’s remote control. Note: Not all Toshiba products currently support HDMI-LINK. Equipment Control Input Source Selection The HDMI-LINK mode on the television’s remote control allows the control of connected HDMI-LINK equipment being watched.
English HDMI-LINK Menus By activating the Enable HDMI-LINK feature in the HDMI-LINK setup menu, individual HDMI-LINK features can then be activated. Enable HDMI-LINK One Touch Play When the Enable HDMI-LINK is set to On, it allows the other functions to be enabled.
English Auto Standby When the Auto Standby is enabled, switching off the television will automatically switch off all connected HDMI-LINK equipment. In the HDMI-LINK Setup menu, press ▲ or ▼ to select Auto Standby. Press ◄ or ► to select On or Off. Amplifier Control In the HDMI-LINK Setup menu, press ▲ or ▼ to select Amplifier Control. Press ◄ or ► to select On or Off. Speaker Preference This feature allows the audio output preference to be set to the TV speakers or AV amplifier speakers.
On Timer Press ▲ or ▼ to select Power On Time and press ◄ or ► or use the number key pad on the remote to enter the time. This feature allows you to set the television to turn on automatically to a preset channel at a certain time of day or after a certain length of time. When On timer is set to On, the green On Timer indicator on the front of the television is lit. Press ▲ or ▼ to select Repeat and press ◄ or ► to select ONCE, DAILY, Mon.~Fri., Mon.~Sat. or Sat.~Sun.
English EPG Press the button on the remote to enter the Timer List menu. EPG (Electronic Programme Guide) supports 9 sets of timers. You can set or cancel a timer for a selected programme within the guide. When the TV is on and the timer activates, a dialogue box is shown informing you that the programme is about to start. When the TV is in standby mode and the timer activates, the TV will wake up with backlight off, speaker mute on, and change to the channel selected.
4:3 Stretch Panel Lock disables the buttons on the television. All buttons on the remote control can still be used. When 4:3 Stretch is activated, this function will switch 4:3 format programmes into a full screen picture. Press MENU. Press ◄ or ► to select PREFERENCES and press to enter the submenu. PICTURE SOUND SETUP APPLICATIONS In the PREFERENCES menu, press ▲ or ▼ to select 4:3 Stretch. Press ◄ or ► to select On or Off. NOTE: In HDMI signal format, this function is available.
English System Upgrade Press MENU. Press ◄ or ► to select SETUP and press to enter the submenu. PICTURE SOUND SETUP APPLICATIONS PREFERENCES Press ▲ or ▼ to select System Upgrade and press to enter the submenu. Press ▲ or ▼ to select Auto Upgrade and press ◄ or ► to select On or Off. Software Upgrade Auto Upgrade USB Upgrade Edit Off OK RETURN Back Insert a USB storage device. Press ▲ or ▼ to select USB Upgrade and press to start upgrading the firmware.
This television has a multi-page text memory, which takes a few moments to load. Control Buttons Setting the Modes Below is a guide to the functions of the remote control text buttons. Displays the index/initial page: Press to access the index/initial page. The page displayed is dependant on the broadcaster. Reveals concealed text: To discover the solutions on quiz and joke pages press the button. Holds a wanted page: At times it is convenient to hold a page of text.
English PC Settings • Most of the picture controls and functions are available. However features not available will be greyed out. • In the PC input mode, the Manual Setting is not displayed. • First press until the video input mode list appears on the screen, then press ▲ or ▼ and in order to select the PC input mode. • This function may not be available for some signal or if no signal is received.
English Input Selection and AV Connections Use the Input Selection feature if the television does not switch over automatically when using an external device. HDMI1 Audio Lip Sync Mode If the connected HDMI source does not support digital audio, plug the audio cable into PC/HDMI 1 (AUDIO) on the back of the television (as shown in the “Connecting an HDMI or DVI device to the HDMI input” section), then use the HDMI 1 Audio setting.
English Frequently Asked Questions Q A Q A Q A Why is there no sound or picture? Check that the television is on and that all connections are made properly. There is a picture, but why is there little or no colour? What else can cause a poor picture? Interference or a weak signal. Try a different television station. Manual fine tuning may help: Select the ATV/DTV Manual Tuning in the SETUP menu. Highlight the station and press , then press ◄ or ► to select Manual fine tuning.
Why are the colours wrong when an NTSC source is played? A Connect the source via a SCART cable and play. Select Manual setting from the SETUP menu and set the Colour System to Auto. English Q Manual setting Colour system: Auto EXT 1 Select Q A Q A A Change OK Save RETURN Back What can be done if the user-defined password has been forgotten? Use the universal password 1276, then change to a new number of your choice.
English Specifications and Accessories • This television complies with the specification listed below. • Design and specifications are subject to change without notice.
Model 26EL83*G 32AV83*G 32LV83*G 32EL83*G 32HL83*G 40LV83*G 42HL83*G Weight (approx.) Model 26EL83*G English Dimensions (H x W x D mm) (approx.) 467 x 643 x 181 558 x 786 x 233 542 x 770 x 201 679 x 977 x 274 677 x 1007 x 238 6.5kg 32AV83*G 32LV83*G 32EL83*G 10.0kg 32HL83*G 40LV83*G 16.5kg 42HL83*G 15.0kg Headphone Socket R3.5mm stereo Operating Conditions Temperature: 5oC - 35oC (41oF - 94oF) Humidity: 20% - 80% (non-condensing) Accessories Remote control 2 batteries (AAA, IEC R03 1.
English Cleaning the screen and cabinet… Turn off the power, clean the screen and cabinet with a soft, dry cloth. We recommend that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage. Disposal… The following information is only for EU-member states: Disposal of products The crossed out wheeled dust bin symbol indicates that products must be collected and disposed of separately from household waste.
