32AV93*B 32/40LV93*B 26/32EL93*B DIGITAL Series Register your TV online at: www.toshiba.co.
English Contents Safety Precautions.................... 5 Using the Controls.................... 26 Installation and important information................................. 6 Switching On........................................ 27 Using the Remote Control.................... 27 Using the Side-Key Controls................ 27 Where to install.................................... 6 When using a Wall Bracket.................. 6 Tuning the Television................ 28 Digital Switchover...................
Play Music Files................................... 50 Stable Sound........................................ 40 Repeat Settings.................................... 51 Surround Sound................................... 40 Using the Play List............................... 51 Bass Boost........................................... 40 Music Info............................................. 51 Dynamic Range Control....................... 40 Enjoy Videos through USB Port.....................................
English Auto Format (Widescreen)................... 62 4:3 Stretch............................................ 62 Blue Screen.......................................... 62 Side Panel............................................ 62 DivX Registration................................. 63 DivX Deregistration.............................. 63 System Information.............................. 63 System Upgrade.................................. 63 Text Services and Text Information.................................
English Safety Precautions This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products and some points may not apply to the goods you have just purchased.
English Installation and important information Where to install Sturdy tie (as short as possible) Locate the television away from direct sunlight and Stand clip strong lights, soft, indirect lighting is recommended Screw (not supplied) for comfortable viewing. Use curtains or blinds to Fixing strap Fixing strap prevent direct sunlight falling on the screen.
Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by: i) fire; ii) earthquake; iii) accidental damage; iv) intentional misuse of the product; v) use of the product in improper conditions; vi) loss and/or damage caused to the product while in the possession of a third party; any damage or loss caused as a result of the owner’s failure and/or neglect to follow the invii) structions set out in the owner’s manual; any loss or damage caused directly as a result of misuse
English When does switchover happen? English Digital Switchover Keep this important information about how to re-tune your TV during the digital TV switchover *Copeland switches on October 17, 2007 English Keep this important information about how to re-tune your TV during the TV switchover The exact date you switch depends on the transmitter you are served by. To check when you switch, go to Digital UK’s postcode checker on www.digitaluk.co.
4 Steps (Steps 1-4) This guide can be used to help you re-tune the following product with the remote control below: Make sure your TV is on and press 80 for the BBC News channel TOSHIBA Digital TV 1 ) Press MENU and press ◄ or ► to select SETUP. 2 2 PICTURE SOUND APPLICATIONS SETUP PREFERENCES 1 2 ) Press ▲ or ▼ to select Auto tuning, and press to enter the submenu.
English Your guide to Manual re-tuning If you are comfortable with technical information and your basic re-tune hasn’t worked, you can use this manual re-tune guide. If your Freeview TV or box picks up a di erent regional service to your preferred service (e.g. BBC England instead of BBC Scotland, or ITV Central instead of ITV Anglia), you can use this manual re-tune guide. 800 or above, this guide will help you put them in your preferred position. retailer or installer.
English SET UP Language Country Tuner Mode Auto tuning ATV Manual Tuning DTV Manual Tuning DTV Settings AV connection Picture Position Quick Setup 1/2 English UK Antenna OK OK OK OK OK Enter RETURN Back DTV Manual Tuning Signal Strength Quality Weak Average RF Channel Start Scan 0−9 Input 11 Strong Poor 5 OK Edit RETURN Back
English The Remote Control Simple at-a-glance reference of your remote control.
Before connecting any external equipment, turn off all main power switches. If there is no switch remove the mains plug from the wall socket. *a decoder could USB SOCKET be Digital Satellite or any other compatible decoder. *Model will determine power code position. HDMI 2 INPUT SOCKET POWER CORD HDMI 1 INPUT SOCKET RGB/ PC For 32AV93*B | 32/40LV93*B *a decoder could USB SOCKET be Digital Satellite or any other compatible decoder. *Model will determine power code position.
English Aerial cables: - - - - - - - - - - - - - - - - - - Connect the aerial to the ANT socket on the rear of the television. If you use a decoder and/or media recorder, connect through the decoder and/or media recorder to the television. SCART cables: - - - -- - - - - - - - - - - - - - Connect the video recorder IN/OUT or decoder TV socket to the television. Connect the media player SAT socket to the decoder MEDIA REC. socket. Before running Auto Tuning put your decoder and media recorder to Standby.
English REGZA-LINK Connections The basic functions of connected audio/video equipment can be controlled using the television’s remote control if a REGZA-LINK compatible device is connected.
English Connecting an HDMI or DVI device to the HDMI input The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI source device or uncompressed digital video from a DVI (Digital Visual Interface) source device. This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) programme material in digital form from EIA/CEA-861-D–compliant [1] consumer electronic devices (such as a set-top box or DVD player with HDMI or DVI output).
English HDMI device HDMI out HDMI cable (not supplied) For 26/32EL93*B To view the HDMI device video, press the button to select HDMI 1 or HDMI 2 mode.
English To connect a DVI device Connect an HDMI-to-DVI adapter cable (HDMI type A connector) to the HDMI 1. • The recommended HDMI-to-DVI adapter cable length is 6.6ft (2m). • An HDMI-to-DVI adapter cable transfers video only. • Separate analogue audio connection are not supported for audio receivers.
English HDMI-to-DVI adapter cable (not supplied) DVI device For 26/32EL93*B To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow these procedures: • When turning on your electronic components, turn on the television first, and then the HDMI or DVI device. • When turning off your electronic components, turn off the HDMI or DVI device first, and then the television.
English Connecting a Computer With either an RGB/PC or an HDMI connection, you can watch your computer’s display on the television. To connect a PC to the HDMI terminal When connecting a PC to the HDMI terminal on the television, use an HDMI-to-DVI adapter cable. If connecting a PC with an HDMI terminal, use an HDMI cable (type A connector). A separate analogue cable is not necessary.
English the back of your television 2 Computer HDMI-to-DVI adapter cable (not supplied) For 26/32EL93*B For acceptable PC and video signal formats, see page 22. NOTE: • The edges of the images may be hidden. • If connecting a certain PC model with a unique PC signal, the PC signal may not be detected correctly.
English Acceptable Video signals through HDMI terminals Resolution H. Frequency (KHz) V. Frequency (Hz) 480i 15.734 60.000 480p 31.500 60.000 576i 15.625 50.000 576p 31.250 50.000 720p 37.500 50.000 720p 45.000 60.000 1080i 28.125 50.000 1080i 33.750 60.000 1080p 27.000 24.000 1080p 28.125 25.000 1080p 33.750 30.000 1080p 56.250 50.000 1080p 67.500 60.
When viewing in digital mode, the on-screen information and programme guide provide access to programme details for all available channels. Information Guide Select the on-screen guide by pressing GUIDE. The guide screen will appear highlighting details of the channel and programme currently being viewed. This may take a few moments to appear. Press , and the information screen will appear giving details of the channel and programme currently being viewed.
English Frequently Asked Questions Q A Q A Why is there no sound or picture? Q What else can cause a poor picture? Check that the television is on and that all connections are made properly. A Interference or a weak signal. Try a different television station. Manual fine tuning may help: There is a picture, but why is there little or no colour? Select the ATV Manual Tuning in the SETUP menu. Highlight the station and press , then press ◄ or ► to select Manual fine tuning.
Why are the colours wrong when an NTSC source is played? A Connect the source via a SCART cable and play. Select Manual setting from the SETUP menu and set the Colour System to Auto. English Q Manual setting Colour system: Auto EXT 1 Select Q A Q A A Change OK Save RETURN Back What can be done if the user-defined password has been forgotten? Use the universal password 1276, then change to a new number of your choice.
English Using the Controls While all the necessary adjustments and controls for the television are made using the remote control, the buttons on the television may be used for some functions.
If the RED Stand By LED is unlit, check that the plug is connected to the power supply. If the picture does not appear press on the remote control, it may take a few moments. To put the television into Standby press on the remote control. To view the television press again. The picture may take a few seconds to appear. For energy saving: We recommend that you use the television with the factory settings. The factory settings are for energy saving.
English Tuning the Television Before switching on the television put your decoder and media recorder to Standby if they are connected. To set up the television use the buttons on the remote control as detailed on page 12. First Time Using Press ▲ or ▼ to select Digital Subtitle Language and then press ◄ or ► to select your preferred language. For first time use, plug in the television and press the button. The Language menu will appear.
Location To use the TV for the display in a store showroom, please select [Store]. [Home] mode is recommended for normal use. Store Auto tuning ATV DTV Select OK Auto tuning RETURN Back Press ◄ or ► to select Home or Store. For normal home use, select Home. NO RETURN Back Press ◄ or ► to select YES or NO. Press menu. to enter the Auto tuning NOTE: Please make sure the aerial is connected to the TV before tuning. Auto tuning Previous settings will be lost ! Press EXIT for no change.
English Setting the Channels NOTE: When Parental Block is activated, the 4-digit password is needed. Auto Tuning Press ▲ or ▼ to select Start Scan and press to start Auto Tuning. The Auto tuning function will completely retune the television and can be used to update the channel list. Auto tuning NOTE: It is recommended that Auto tuning is run periodically to ensure that all new services are added.
Auto tuning Previous settings will be lost! Press EXIT for no change. Tuning Mode Start Scan Operator Selection Scan Type Start Frequency (MHz) End Frequency Modulation Symbol Rate Network ID Edit There are two TV modes: ATV and DTV that can be tuned-in manually using Manual Tuning. ATV mode - Antenna/Cable ATV and DTV Press MENU. Press ◄ or ► to select SETUP and press to enter the submenu. OK Quick Scan Auto Auto Auto Auto Auto Press ▲ or ▼ to select ATV Manual Tuning and press to enter the submenu.
English DTV mode - Antenna Press to display the breakdown menu. Press ◄ or ► to select an item, then press ▲ or ▼ to select the item as shown below. Press MENU. Press ◄ or ► to select SETUP and press to enter the submenu. Press ▲ or ▼ to select DTV Manual Tuning and press to enter the submenu. ATV Manual Tuning Manual fine tuning 1 BG P C 69 0 − − − − − SETUP Select A A B Change C OK Save D E F G RETURN Back H I Position: The number to be pressed on the remote control.
Automatic Power Down Press MENU. Press ◄ or ► to select SETUP and press to enter the submenu. The TV will automatically turn itself off (standby) within 4 hours, if you do not touch the control buttons on the remote control or on the TV control panel. It will also automatically turn off if no input signal is detected after approximately 15 minutes. Press ▲ or ▼ to select DTV Manual Tuning and press to enter the submenu. SETUP In the SETUP menu, press ▲ or ▼ to select Automatic Power Down.
English DTV Settings Re-number Channels The channel order may be changed to suit your personal preference. Press the button on the remote to renumber the highlighted channel. NOTE: This function is only available in DTV mode. Edit the channel number using the number keys on the remote and press . Press MENU. Press ◄ or ► to select SETUP and press to enter the submenu.
Press ◄ or ► to highlight the skip ( ) box. Press ▲ or ▼ to select the desired channel and then press . A tick icon appears. Channels Position 803 804 805 806 807 273 Channel Options CH 800 TV Name Rossia 1 Rossia 24 NTV TRK 5 kamal Bibigon Service Information Radio Three Press ▲ or ▼ to select the channel you wish to swap with the one selected in Step 8 and then press . The positions of the two channels are swapped.
English Subtitle and Audio Enter a new 4-digit password, and re-enter the new password again to confirm. You can choose the Subtitle Type or Audio Type from Normal or Hearing Impaired. If the Hearing Impaired is selected, it provides subtitle services to deaf and hard of hearing viewers with additional descriptions. Subtitle Language or Audio Language allow a programme or film to be viewed with a choice of soundtrack language, provided they are currently being broadcast.
When Favorite Control is On, the favorite channel list appears when pressing . The Common Interface Slot, situated on the side of the television, enables the insertion of a CAM (Conditional Access Module) and card. These are purchased from a service provider and allow additional subscription broadcasts to be viewed. For information, see a service provider. Favorite List 800 Maori Television Insert the CAM and card into the Common Interface Slot, following the instructions provided with the CAM.
English Channel Grouping Press ▲ or ▼ to select the desired channel and press to edit. There are Video, Radio and Text services combined in a channel list for DTV services, The function provides the selection of channel change with one service group or among all services by pressing P and P . NOTE: Press the button on the remote to delete the channel. Favorite List 800 Maori Television In the DTV Settings menu, press ▲ or ▼ to select Channel Grouping. Press ◄ or ► to select On or Off.
English General Controls The General Controls will allow you to select channels and information, use the sound controls, personalise the picture style, and select external equipment. Selecting Channels Subtitles To select a channel use the numbered buttons on the remote control. Channels can also be selected using P and P . If Subtitles are available for your current programme, pressing the SUBTITLE button will toggle Subtitles on or off.
English Sound Controls Volume Controls and Mute Sound Volume Press or Stable Sound The Stable Sound feature limits high volume levels in order to prevent the extreme changes in volume that can occur when channels are changed or a programme switches to a commercial. to adjust the volume. Sound Mute Press on the remote once to turn the sound off and again to cancel. Press MENU. Press ◄ or ► to select SOUND and press to enter the submenu.
Audio Description Press MENU. Press ◄ or ► to select SOUND and press to enter the submenu. Audio Description is an additional narration describing on-screen action, body language, expressions and movements for people with visual disabilities while watching the TV. This function enables you to choose the type of narrations. Press ▲ or ▼ to select Digital Audio Output and press to enter the submenu. Press MENU. Press ◄ or ► to select SOUND and press to enter the submenu.
English Widescreen Viewing Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats. Wide (Expect PC) Wide (PC only) 4:3 Super Live Use this setting when watching a widescreen DVD, widescreen video tape or a 16:9 broadcast (when available). Due to the range of widescreen formats (16:9, 14:9, 20:9 etc.) black bars may be visible on the top and bottom of the screen.
English This setting will show the picture without over scan, i.e. WYSIWYG. This option is only available when watching a PC signal source via HDMI or PC terminal. Normal “Dot by Dot” is a non-scaling display. Depending on the input signal format, the setting will display the picture with side panels and/or bars at the top and bottom (i.e VGA input source). Dot by Dot Press QUICK to display the Quick access menu. Use ▲ or ▼ to select the Picture Size, and press ◄ or ► to select the option.
English Picture Controls Most of the picture controls and functions are available in both digital and analogue modes. NOTE: Features not available will be greyed out. Picture Position Picture Mode The Picture Position may now be adjusted to suit personal preference. You can adjust the picture appearance by selecting the preset value in picture mode based on the programme category. Press MENU. Press ◄ or ► to select SETUP and press to enter the submenu. PICTURE SOUND SETUP APPLICATIONS Press MENU.
The static gamma feature allows you to adjust the levels of black in the picture. This function increases the strength of dark areas of the picture, which improves picture definition. In the Picture Settings menu, press ▲ or ▼ to select Static Gamma. In the Picture Settings menu, press ▲ or ▼ to select Black/White Level. Press ◄ or ► to select the number of Static Gamma (-5~+5). Press ◄ or ► to adjust the level from Off, Low, Middle or High.
English Base Colour Adjustment MPEG NR – Noise Reduction When watching a DVD, the compression may cause some words or picture elements to become distorted or pixelated. Using the MPEG NR feature reduces this effect by smoothing out the edges. The Base Colour Adjustment feature allows the adjustment of individual colours to suit personal preference. This can be useful when using an external source. It only can be adjusted when 3D Colour Management is set to On.
English Enjoy Photos through USB Port The Photo Viewer allows you to playback image files from a USB storage device. Image JPEG PNG Photo Resolution (Mstat suggest) Required DRAM size (Mbytes) Remark Base-line 15360x8704 (1920x8x1088x8) 3.96 Depends on RAM size Progressive 1024x768 6.00 non-interface 9600x6400 3.66 interface 1200x800 3.66 9600x6400 3.
English Set Interval Time Press ▲, ▼, ◄ or ► to select the desired photo and press to view. Press MENU to change the settings when viewing a photo. Press MENU to change the settings when viewing a photo. Press ◄ or ► to select and press to select the desired interval time (3/5/10/15/30/60/90 Sec). NOTE: If Repeat is On, slide show starts photo viewing from the first photo in the folder after reaching the final photo.
and press English Press ◄ or ► to select . Background Music 0 Play List Move OK Select RETURN Back Press ▲ or ▼ to select music and press to play music. Press RETURN on the remote to collapse the list. 1\1 USB:\ Return Music Photo Video P Page Move OK Press ◄ or ► to select to select One or Folder. Select RETURN Back and press Photo Info Info displays the file status information (content number, photo title, shooting date and time, resolution etc.).
English Enjoy Music through USB Port The MP3 Player allows you to playback music files from a USB storage device. Audio Codec File Extension Bit Rate MPEG1 Layer2 MP3 32Kbps~ 448Kbps(Bit rate) 32KHz ~ 48KHz(Sampling rate) MPEG1 Layer3 MP3 32Kbps ~ 320Kbps(Bit rate) 32KHz ~ 48KHz(Sampling rate) Play Music Files Press ▲ or ▼ to select the desired music and press to play. Insert a USB storage device and press on the remote. Use ▲ or ▼ to select MEDIA and press .
English Repeat Settings Press ◄ or ► to select Press . to select Off, One or Folder. Using the Play List Press ◄ or ► to select and press . Press ▲ or ▼ to select music and press to play music. Press EXIT on the remote to collapse the list. Pause 001.MP3 002.MP3 003.MP3 1/1 Folder 00:00:02 / 00:02:42 00001 / 00003 001.MP3 16 Play List P Page Move OK Select RETURN Back Music Info Info display file status information (content number, music title, Bit Rate, Artist, Sampling, Year, and size).
English Enjoy Videos through USB Port The Video Viewer allows you to playback video files from a USB storage device. File Container Extension dat, mpg, mpeg ts, trp, tp vob MPEG Video Codec MPEG1 MPEG2 MPEG2-TS H.264 H264-TS MPEG2 MPEG2-PS MPEG2 SPEC Bit Rate (Mbit/sec) 1080P@ 30fps 20 1080P@ 30fps 20 1080P@ 30fps 20 Profile Remark MPEG2: Main Profile@ High Level H.264: Main Profile and High Profile@Level 4.0 MPEG2: Main Profile@ High Level MPEG2: Main Profile@ High Level H.264 H.
Press MENU to change the settings when viewing a video. Insert a USB storage device and press on the remote. Use ▲ or ▼ to select MEDIA and press . Play Inputs TV 1 2 3C HDMI1 HDMI2 MEDIA PC Standard 16:9 Folder 00:00:08 / 00:02:28 00001 / 00001 001.
English Repeat Settings Step Forward Press MENU to change the settings when viewing a video. The feature allows you to view a video one frame at a time. Press MENU to change the settings when viewing a video. Press ◄ or ► to select and press to select Off, One or Folder. Press ◄ or ► to select to play step by step. Set Press MENU to change the settings when viewing a video. Video Info Info display file status information (content number, video title, audio track, subtitle, program, size, etc.).
English Goto Time The feature allows you to view a selected time during the video. Press MENU to change the settings when viewing a video. Press ◄ or ► to select and press . Use the number key pad on the remote to enter time. Press to go to the input time. Play Input search time: Standard 0 0 : 0 16:9 0 : 0 0 OK Folder 00:00:08 / 00:02:28 00001 / 00001 001.
English REGZA-LINK Controls This feature uses CEC (Consumer Electronics Control) technology, and allows the control of Toshiba REGZA-LINK compatible equipment from the television’s remote control. NOTE: Not all Toshiba products currently support REGZA-LINK. Equipment Control Select REGZA-LINK Device The REGZA-LINK mode on the television’s remote control allows the control of connected REGZA-LINK equipment being watched.
English REGZA-LINK Menus By activating the Enable REGZA-LINK feature in the REGZA-LINK Setup menu, individual REGZA-LINK features can then be activated. One Touch Play Enable REGZA-LINK The function of REGZA-LINK will automatically power on the television that was in standby mode and switch the television’s input source to the port connected with the audio/video equipment by powering-on or playing from the audio/video equipment.
English Auto Power On The Auto Power On setting allows the television to be automatically switched On or Off if a REGZA-LINK device is turned on or off. In the REGZA-LINK Setup menu, press ▲ or ▼ to select Auto Power On. Press ◄ or ► to select On or Off. Auto Standby When the Auto Standby is enabled, switching off the television will automatically switch off all connected REGZA-LINK equipment. In the REGZA-LINK Setup menu, press ▲ or ▼ to select Auto Standby. Press ◄ or ► to select On or Off.
This is a new feature that uses CEC technology and allows you to control REGZA-LINK compatible devices from the TV remote control via HDMI connection. When there are two or more REGZA-LINK devices connected to the television, the device selection menu appears. Highlight the desired device, and then press to select.
English Preference Controls On Timer Press ▲ or ▼ to select Power On Time and press ◄ or ► or use the number key pad on the remote to enter the time. This feature allows you to set the television to turn on automatically to a preset channel at a certain time of day or after a certain length of time. When On timer is set to On, the green On Timer indicator on the front of the television is lit. Press ▲ or ▼ to select Repeat and press ◄ or ► to select ONCE, DAILY, Mon.~Fri., Mon.~Sat. or Sat.~Sun.
Press the button on the remote to enter the Timer List menu. EPG (Electronic Programme Guide) supports 9 sets of timers. You can set or cancel a timer for a selected programme within the guide. When the TV is on and the timer activates, a dialogue box is shown informing you that the programme is about to start. When the TV is in standby mode and the timer activates, the TV will wake up with backlight off, speaker mute on, and change to the channel selected.
English Panel Lock 4:3 Stretch Panel Lock disables the buttons on the television. All buttons on the remote control can still be used. When 4:3 Stretch is activated, this function will switch 4:3 format programmes into a full screen picture. Press MENU. Press ◄ or ► to select PREFERENCES and press to enter the submenu. PICTURE SOUND SETUP APPLICATIONS In the PREFERENCES menu, press ▲ or ▼ to select 4:3 Stretch. Press ◄ or ► to select On or Off.
System Upgrade Press MENU. Press ◄ or ► to select SETUP and press to enter the submenu. View the registration code that is required to play video files that are compatible with the DivX® VOD (Video On Demand) service on the TV. DivX® VOD is a video delivery service that lets you rent or purchase video content recorded in DivX® format. To play video files that are compatible with the DivX® VOD service, the TV needs to be registered as a DivX® player.
English Text Services and Text Information This television has a multi-page text memory, which takes a few moments to load. Setting the Modes Control Buttons In the PREFERENCES menu, press ▲ or ▼ to select Teletext. Below is a guide to the functions of the remote control text buttons. Displays the index/initial page: Press to access the index/initial page. The page displayed is dependant on the broadcaster. Reveals concealed text: To discover the solutions on quiz and joke pages press the button.
• Most of the picture controls and functions are available. However features not available will be greyed out. • In the PC input mode, the Manual Setting is not displayed. • First press until the video input mode list appears on the screen, then press ▲ or ▼ and in order to select the PC input mode. • This function may not be available for some signal or if no signal is received. • The optimum points of the clock phase and sampling clock adjustments may be incomprehensible according to the input signals.
English Input Selection and AV Connections Use the Input Selection feature if the television does not switch over automatically when using an external device. Lip Sync Mode Input Signal Selection This option activates an auto audio/video display timing adjustment function that allows HDMI source devices to accurately perform synchronization automatically. All of the above HDMI settings require a proper HDMI source device.
English Specifications and Accessories • This television complies with the specification listed below. DVB-T Broadcast systems/ Broadcast systems/channels channels UK UHF 21-68 PAL-I UHF UK21-UK69 France VHF 05-10 PAL-B/G UHF E21-E69 (VHF 01-05) VHF E2-E12, S1-S41 UHF 21-69 Germany VHF 05-12 SECAM-L UHF F21-F69 UHF 21-69 VHF F1-F10, B-Q Austria VHF 05-12 SECAM-D/K UHF R21-R69 UHF 21-69 VHF R1-R12 Switzerland VHF 05-12 UHF 21-69 Italian VHF 05-12 (D,E,F,G,H,H1,H2) UHF 21-69 Visible Screen Size (approx.
English Weight (approx.) TV with stand Gross weight TV without stand Dimensions (H x W x D mm) (approx.) 32AV93*B 9.5kg 32LV93*B 9.0kg 40LV93*B 14.0kg 26EL93*B 6.0kg 32EL93*B 9.0kg 32AV93*B 12.5kg 32LV93*B 12.5kg 40LV93*B 18.5kg 26EL93*B 8.5kg 32EL93*B 12.5kg 32AV93*B 8.7kg 32LV93*B 8.2kg 40LV93*B 13.0kg 26EL93*B 5.5kg 32EL93*B 8.
• • Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. • DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license. Covered by one or more of the following U.S.
English Cleaning the screen and cabinet… Turn off the power, clean the screen and cabinet with a soft, dry cloth. We recommend that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage. Disposal… The following information is only for EU-member states: Disposal of products The crossed out wheeled dust bin symbol indicates that products must be collected and disposed of separately from household waste.
© TOSHIBA Television Central Europe Sp. z o.o. 2012 All rights reserved. Reproduction in whole or part without written permission is strictly prohibited. TOSHIBA Television Central Europe Sp. z o.o. ul. Pokoju 1, Biskupice Podgórne, 55-040 Kobierzyce, Poland Specification is subject to change without notice.
