9/22/26/32/42 SL738G DIGITAL Series Downloaded from www.Manualslib.
Contents Safety Precautions........................................ 3 Volume...................................................... 28 Installation and important information........ 4 Balance, Bass, Treble.............................. 28 The remote control........................................ 6 Surround Sound...................................... 28 Inserting batteries and effective range of the remote.................................................. 7 Stable Sound®...............................
REGZA-LINK Menus.................................... 41 Auto Install............................................... 52 One Touch Play........................................ 41 Manual OAD............................................. 52 System Standby....................................... 41 System Information................................. 52 System Audio Control............................. 41 Text services................................................ 53 PC Link...............................
SETTING UP English Safety Precautions DO be careful with glass panels on equipment. This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products and some points may not apply to the goods you have just purchased.
English SETTING UP Installation and important information Where to install Locate the television away from direct sunlight and strong lights, soft, indirect lighting is recommended Sturdy tie for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen. Place the TV set on a stable, level surface that can Hook support the weight of the TV.
SETTING UP SYMBOL DEFINITION DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un-insulated "DANGEROUS VOLTAGE" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
English SETTING UP The remote control Simple at-a-glance reference of your remote control.
SETTING UP English Inserting batteries and effective range of the remote Remove the back cover to reveal the battery compartment and make sure the batteries are inserted the right way round. Suitable battery types for this remote are AAA, IEC R03 1.5V. Do not combine a used, old battery with a new one or mix battery types. Remove dead batteries immediately to prevent acid from leaking into the battery compartment. Dispose of them in accordance with instructions on page 60 of this manual.
English SETTING UP Connecting external equipment Before connecting any external equipment, turn off all main power switches. If there is no switch remove the mains plug from the wall socket. 19/22SL738G: *a decoder could be Digital Satellite or any other compatible decoder. AC-IN LOCK UNLOCK RGB/PC media recorder decoder* PC/HDMI 1 (AUDIO) 1 2 Digital Audio (1) (3) COMPONENT Y P B /C B L P R/C R AUDIO R 26/32SL738G: *a decoder could be Digital Satellite or any other compatible decoder.
SETTING UP English 42SL738G: *a decoder could be Digital Satellite or any other compatible decoder. AC-IN HDMI 1/2/4 media recorder (1) NOTE: SCART1 : SCART2 : (2) 1 decoder* (1) (INPUT/TV (2) (INPUT/TV OUT) OUT) 2 4 PC/HDMI 1 (AUDIO) Digital Audio (4) COMPONENT RGB/PC Y PB /C B Y PB /C B PR /C R L AUDIO R PR /C R L AUDIO R (5) COMPONENT NOTE: SCART1 can support Canal+ decoder.
English SETTING UP REGZA-LINK controls the basic functions of connected audio/video equipment using the television's remote control. A wide variety of external equipment can be connected to the back of the television, therefore the relevant owner's manuals for all additional equipment must be referred to. If the television automatically switches over to monitor external equipment, return to normal television by pressing the desired programme position button. To recall external equipment, press to select.
SETTING UP English REGZA-LINK Connections The basic functions of connected audio/video equipment can be controlled using the television's remote control if a REGZA-LINK compatible device is connected.
English SETTING UP 42SL738G: TV back view TV Side view 42SL738 HDMI 1/2/4 HDMI 3 1 2 4 AV amplifier Playback equipment HDMI in HDMI out HDMI out Playback equipment HDMI out NOTE 1: It is recommended that for correct operation all audio/video devices are connected using HDMI cables branded with the HDMI logo ( ). If several devices are connected, the REGZALINK feature may not operate properly. After connecting the equipment use the REGZA-LINK menus to setup the desired options.
SETTING UP English Connecting an HDMI or DVI device to the HDMI input The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI source device, or uncompressed digital video from a DVI (Digital Visual Interface) source device. This input is designed to accept HDCP (High-Bandwidth Digital- Content Protection) programme material in digital form from EIA/CEA-861-D–compliant [1] consumer electronic devices (such as a set-top box or DVD player with HDMI or DVI output).
English SETTING UP 42SL738G: TV back view TV Side view 42SL738 HDMI 1/2/4 HDMI 3 1 2 4 HDMI cable (not supplied) HDMI device HDMI out To view the HDMI device video, press to select the mode. To connect a DVI device Connect an HDMI-to-DVI adapter cable (HDMI type A connector) to HDMI1 terminal and audio cables to the PC/HDMI1 Audio socket (see illustration). • The recommended HDMI-to-DVI adapter cable length is 6.6 ft (2m). An HDMI-to-DVI adapter cable transfers video only.
SETTING UP English 42SL738G: TV back view 42SL738 HDMI 1/2/4 1 PC/HDMI 1 (AUDIO) 2 Audio cable for HDMI to television connection (not supplied) 4 HDMI-to-DVI adapter cable (not supplied) DVI device NOTE: To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow these procedures: • When turning on your electronic components, turn on the television first, and then the HDMI or DVI device.
English SETTING UP Connecting a computer With the HDMI connection, you can watch your computer’s display on the television and hear the sound from the televisions speakers. To connect a PC to the HDMI terminal When connecting a PC to the HDMI terminal on the television, use an HDMI-to-DVI adapter cable and analogue audio cables. If connecting a PC with an HDMI terminal, use an HDMI cable (type A connector). Separate analogue cables are not necessary (see page 13).
SETTING UP English Acceptable Video signals through HDMI terminals Format VGA Resolution 640 x 480 480i 720 x 480 576i 720 x 576 480p 720 x 480 576p 720 x 576 720p 1080i 1080p 1280 x 720 1920 x 1080 1920 x 1080 Refresh Rate H. Frequency Pixel Clock 60.000Hz 31.500kHz 25.200MHz 59.940Hz 31.469kHz 25.175MHz 72.809Hz 37.861kHz 31.500MHz 75.000Hz 37.500kHz 31.500MHz 60.000Hz 15.750kHz 27.000MHz 59.940Hz 15.734kHz 27.000MHz 50.000Hz 15.625kHz 27.000MHz 60.000Hz 31.
English SETTING UP Using the controls While all the necessary adjustments and controls for the television are done using the remote control, the buttons on the television may be used for some functions. NOTE: COMMON INTERFACE (CI) The common interface is for a Conditional Access Module (CAM). Contact a service provider for details.
SETTING UP English 42SL738G: DVB COMMON INTERFACE CI Card R R (3) VIDEO INPUT L AUDIO L Video VIDEO USB USB Headphone HDMI 3 HDMI 3 IR SENSOR GREEN LED On Timer/EPG Timer On TOUCH SENSOR Switching on RED LED - Standby BLUE LED - Power on Using the side-panel controls Before switching on the television, make sure to connect the aerial cable, and select TV as the input source. To alter the volume, press – +.
English TUNING THE TELEVISION 4 Tuning the television Before switching on the television, put your decoder and media recorder to Standby if they are connected. Press ▲ or ▼ to select your country and press ► to go to the next step. Initial Setup Country Please select your country: United Kingdom Italy Netherlands Sweden Bulgaria Greece Russia Make sure to connect the aerial cable, and select TV as the input source.
TUNING THE TELEVISION 4 NOTE: When Channel Block is activated the 4-digit password is needed to enter the Channels submenu under SETUP menu. SETUP Country United Kingdom OSD Language English Channels Automatic Power Down On Location Home Software Upgrade Parental Reset TV Auto Scan The Auto Scan will completely re-tune the television and can be used to update the channel list. It is recommended that Auto Scan is run periodically to ensure that all new services are added.
English TUNING THE TELEVISION Single RF Scan Scan single RF channels. You can check the Signal Strength and the Signal Quality. Auto Scan Scan All Channels. Select Channels from the SETUP menu. 0% Scan Mode Start Frequency (KHz) End Frequency (KHz) Modulation Symbol Rate (Ksym/s) Network ID Scan Highlight Single RF Scan and press ► or to enter. Advance 362000 362000 Auto 6900 100 Press ◄ and ► to select the RF Channel, then press to start scanning.
TUNING THE TELEVISION Press number buttons 0~9 to enter the Start Frequency. Press ▲ or ▼ to select Scan Up or Scan Down and press ► or to start scan. Press to stop scanning. Favorite Network Select Please select your favorite network: TVBS Network Oslo og Akershus Analogue Manual Scan Search for analogue channels OK Start Frequency (MHz) Scan Up Scan Down Select EXIT Exit NOTE: This feature is available only for the Country option of Norway, and with DVB_T input source.
English TUNING THE TELEVISION ress ▼ to highlight Channel Skip and P press ► or to enter.
TUNING THE TELEVISION Number 1 2 3 4 5 6 7 8 9 0 In the SETUP menu, press ▼ to highlight Channels and press ► or to enter. Character ABC1 DEF2 GHI3 JKL4 MNO5 PQR6 STU7 VWX8 YZ9 +-.0 ress ▼ to highlight Analogue Channel P Fine Tune and press to enter. Highlight and press channel. 4 Press ◄ or ► to adjust the frequency. Press ◄ to decrease and ► to increase the frequency.
English TUNING THE TELEVISION Automatic Power Down Previous settings will be lost ! Press Cancel for no change. Press OK to continue. OK The TV will automatically turn itself off (standby) after approximately 4 hours, if you do not touch the control buttons on the remote control or on the TV control panel. Cancel Common Interface I n the SETUP menu, press ▼ to highlight Automatic Power Down. This function enables you to watch some pay services (encrypted services).
CONTROLS AND FEATURES Quick Access Menu Quick access menu helps you access some options quickly, such as Picture Mode, Picture Size, Sleep, REGZA-LINK, and Media Player. Press QUICK button to display the Quick access menu and press ▲ or ▼ to select the option. Selecting programme positions To select a programme position, press the numbered buttons on remote control. Quick access The programme positions can also be selected by pressing P and P .
English CONTROLS AND FEATURES Stable Sound® Sound controls Stable Sound reduces the volume level differences between channels. It automatically remains on the same volume level when you change channels. Volume Volume Press or to adjust the volume. In the SOUND menu, press ▼ to select Stable Sound. Sound Mute Press ◄ or ► to switch function On or Off. Press once to turn the sound off, press again to cancel.
CONTROLS AND FEATURES Advanced Audio Settings Visually Impaired: This function provides descriptive narration of key visual elements making television programmes, feature films, home video and other visual media accessible to people who are visually blind or visually impaired. The Advanced Audio settings help to create an enhanced surround sound experience with deep, rich bass from stereo sound sources. Your TV’s audio will sound fuller, richer, and wider.
English CONTROLS AND FEATURES Widescreen viewing Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats. This setting is available when watching video signal source via HDMI, and will show the picture without over scan. Native Use this setting when watching a widescreen DVD, widescreen video tape or a 16:9 broadcast (when available). Due to the range of widescreen formats (16:9, 14:9, 20:9 etc.) black bars may be visible on the top and bottom of the screen.
CONTROLS AND FEATURES English Use this setting when watching a 14:9 broadcast. 14:9 PC Wide Use this setting for PC connected via HDMI or RGB/PC terminal when receiving PC signal format. This setting will display the image without picture clipping. PC Normal Use this setting for PC connected via HDMI or RGB/PC terminal when receiving PC signal format. This setting will display the image correctly without distortion or picture clipping. Dot by Dot “Dot by Dot” is a non-scaling display.
English CONTROLS AND FEATURES Picture controls Back Light Adjustment Adjusting the Back Light can improve the clarity of the screen when viewing. Picture Mode Press MENU and press ◄ or ► to select PICTURE. You can adjust the best picture appearance by selecting the preset value in picture mode based on the programme category. Press ▼ to highlight Back Light and press ◄ or ► to adjust. Press MENU and press ◄ or ► to select PICTURE.
CONTROLS AND FEATURES Colour Temperature Colour Temperature User R Gain G Gain B Gain English Press ◄ or ► to select Cool, Medium, Warm or User to suit your preference. DNR DNR (Digital Noise Reduction) enables you to ‘soften’ the screen representation of a weak signal to reduce the noise effect. In the PICTURE menu, press ▼ to highlight Advanced Video and press ► or to enter. 0 0 0 Press ▲ or ▼ to highlight NR and press ► or to enter.
English CONTROLS AND FEATURES MPEG NR Active Backlight When Active Backlight control is activated, it will automatically optimise the backlighting levels for dark scenes. If the receiving signal of MPEG has a grained noise depending on the compression and conversion, the noise may be reduced when using this function. In the PICTURE menu, press ▼ to highlight Advanced Video and press ► to enter. In the PICTURE menu, press ▲ or ▼ to highlight Advanced Video and press ► or to enter.
CONTROLS AND FEATURES Press ▲ or ▼ to select an option, then press to enter the adjustment setting window. The Base Colour Adjustment feature allows the adjustment of individual colours to suit personal preference. This can be useful when using an external source. It only can be adjusted when Colour Management is set to On. Base Colour Adjustment Hue Saturation Brightness 0 0 0 Red Green 0 0 0 Blue 0 0 0 Yellow 0 0 0 Magenta 0 0 0 0 0 Cyan 0 Reset Highlight Advanced Video in the PICTURE menu.
English CONTROLS AND FEATURES H./V. Position Adjust the horizontal and vertical position of the picture. Advanced Video Cinema Mode On NR CTI Auto Adaptive Luma Control Active Backlight On Blue Screen Off 3D Colour Management On Base Colour Adjustment ClearFrame In the PICTURE menu, press ▲ or ▼ to highlight Advanced Video and press ► or to enter. Press ▼ to highlight H./V. Position and press ► or to enter. H.Position V.Position H./V.
CONTROLS AND FEATURES Time The time is set automatically when receiving a digital signal. (You can set the time manually only if the TV has no DTV signal.) Time Zone When you select a Time Zone, the TV time is set by the time offset information based on Time Zone and GMT (Greenwich Mean Time) which is received with the broadcast signal and the time is set automatically by a digital signal. You must set the time correctly before using Power On/Off Timer function.
English CONTROLS AND FEATURES Auto Synchronization Date Time Timer Power On Timer Power Off Timer Time Input selection and AV connections On 2011/01/01 19:22:30 Defining the INPUT and OUTPUT sockets so that the television recognises connected equipment. See page 8 for a clear view of the back connection recommendations. Both On 00:00:00 00:00:00 Most media recorders and decoders send a signal through the SCART lead to switch the television to the correct Input socket.
CONTROLS AND FEATURES 26/32/42SL738G: • This specifies the type of signal going into SCART on the back of the television. Please refer to the manufacturers instructions for the connected equipment. • In the SETUP menu, press ▼ to highlight SCART, then press ► or to enter. SETUP OSD Language SCART Automatic Power Down Location Software Upgrade Parental Reset TV Press ▲ or ▼ to select SCART 1 and press ◄ or ► to select Auto, Mixed, RGB, Composite, or S-Video.
English CONTROLS AND FEATURES REGZA-LINK Controls The REGZA-LINK icon appears automatically after detected with REGZALINK compatible equipment. Press ▼ to highlight the input source shown with the REGZA-LINK icon. This feature uses CEC (Consumer Electronics Control) technology, and allows the control of Toshiba REGZA-LINK compatible equipment from the television’s remote control. Main TV 1 2 3 4C HDMI 1 HDMI 2 HDMI 3 PC NOTE: Not all Toshiba products currently support REGZA-LINK.
CONTROLS AND FEATURES The Pass-Through feature allows you to control the connected REGZA-LINK device by the television’s remote control. By activating the Enable REGZA-LINK feature in the REGZA-LINK setup menu, individual REGZA-LINK features can then be activated. Press ▲ or ▼ to select REGZA-LINK in the Quick Access Menu, and then press OK. The control panel will appear. One Touch Play When there are two or more REGZA-LINK devices connected to the television, a device selection menu will appear.
English CONTROLS AND FEATURES PC Link This feature automatically adjusts the suitable widescreen formats and picture preferences when connected to a REGZA-LINK PC. Auto Power On The Auto Power On setting allows the television to be automatically switched On or Off if a REGZA-LINK device is turned On or Off. In the REGZA-LINK Setup menu, press ▼ to highlight Auto Power On. NOTE: This feature is dependent on the connected equipment. Press ◄ or ► to select On or Off.
CONTROLS AND FEATURES Photo Multi-View This view mode allows all the images within a selected folder to be viewed simultaneously, using thumbnail views in a grid. The initial highlighted position will be the top left image within the grid. Enter Media Player The Media Player allows the viewing of photos (JPEG files) and music (MP3 files) stored in a USB storage device. (Connectivity is not guaranteed for all devices.) Open Media Player. Press ▲, ▼, ◄, or ► to select a folder then press .
English CONTROLS AND FEATURES Playing Photo Slideshow Alan.Parsons... This view mode displays all the images in a selected folder as a slideshow, scrolling through them automatically. In the Multi View grid, press ▲, ▼, ◄, or ► to highlight an image. Press . Slideshow will now display all the images in the selected folder. Pressing P and P will display next or previous images. The images can also be rotated and their information displayed. Menu: Select the playing method.
CONTROLS AND FEATURES Use the Digital Subtitle function when two or more subtitle languages are broadcasted. If subtitle data in a selected language is not broadcasted, the default language subtitle will be displayed. Preference control Analogue Subtitle Highlight Subtitle in the PREFERENCES menu, and press ► or to enter. You can set the subtitle on or off while watching TV. Press ▲ or ▼ to select the Digital Subtitle Language or Digital Subtitle Language 2nd and press ◄ or ► to select the language.
English CONTROLS AND FEATURES In the PREFERENCES menu, press ▼ to highlight Audio Channel. Parental control Press ◄ or ► to select Stereo, Dual1, Dual2, or Mono. This function blocks channels or programmes that you do not want to or that you do not want your children to watch. A password is required to access this function. The factory default password is “0000”.
CONTROLS AND FEATURES English Press ▼ to highlight the Channel Block and press ► or to enter. Channel Block Programme Block Input Block Change Password Panel Lock Factory Default SETUP Country United Kingdom OSD Language English Channels Automatic Power Down On Location Home Software Upgrade Parental Reset TV Parental Off OK OK 4 Enter Select RETURN Back EXIT Enter Enter the 4-digit password. Exit Press ▼ to highlight the channels you want to block, then press to set.
English CONTROLS AND FEATURES Lock Type Start Time End Time Time Interval Lock Off 00/00/00 23:59:59 Select RETURN Back EXIT Age Rating Programme Block None Exit Select RETURN Back EXIT Exit NOTE: This function is available for the programme with Age Rating information. Programme Block This function prevents children from watching certain TV programmes, according to the rating limit set. Input Block This function can disable the specific external input signals.
CONTROLS AND FEATURES English Change Password 19/22SL738G: Change the 4-digit parental control password. The default password is 0000. 1 2 3 4 5 6 7 TV 1 2 3C HDMI 1 HDMI 2 PC OK Set Input Block Highlight Parental in the SETUP menu, and press ► or to enter. Enter the 4-digit password. Press ▲ or ▼ to highlight the Change Password and press ► or to enter.
English CONTROLS AND FEATURES Panel Lock You can lock the control buttons on your TV by using this Panel Lock. When this function enables, the TV can be controlled only by the remote control. Highlight Parental in the SETUP menu, and press ► or to enter. Digital on-screen information and programme guide The on-screen information and programme guide give access to programme details for all available channels. Information Enter the 4-digit password.
CONTROLS AND FEATURES Select the on-screen guide by pressing GUIDE, the guide screen will appear highlighting details of the programme and event currently being viewed. This may take a few moments to appear. Auto Download This feature enables your TV to download new software automatically upon broadcasting. Press ◄ or ► for information on other events scheduled for the programme selected. In the SETUP menu, press ▼ to highlight Software Upgrade and press ► or to enter.
English CONTROLS AND FEATURES Auto Install Over-Air Download This feature enables your TV to install new software automatically. Scanning. In the SETUP menu, press ▼ to highlight Software Upgrade and press ► or to enter. Cancel Press ▼ to highlight Auto Install. Press ◄ or ► to select On or Off. Exit EXIT System Information This feature can be used to check the version of software currently installed.
TEXT SERVICES Text services Text Information The first text page shown will be the index page. Any text page can be accessed by entering the 3-digit page number using the numbered buttons, pressing the coloured buttons or pressing P to advance to the next page and P to go back to the previous page. This television has a multi-page text memory, which takes a few moments to load. Setting the Language You can set the teletext language.
English PROBLEM SOLVING Questions and Answers Below are the answers to some of the most common queries. Q A Q A Q A Q A Q A Q A Why is there no sound or picture? Check the television is not in standby mode. Check the mains plug and all mains connections. Why is there incorrect or no sound when in DTV mode? Press to ensure the hard of hearing option has not been selected.
PROBLEM SOLVING English Q A Q A Q What can be done if the user-defined password has been forgotten? Use the universal password 1276, then change to a new number of your choice. Why does the TV turn off by itself? After roughly 15 minutes without any input video signal at TV mode, the TV will turn off to save power. Does this TV support the DPMS? A This set is equipped with a function for saving energy which supports the VESA Display Power Management Signaling (DPMS) standard.
English INFORMATION Specifications and accessories • • This television complies with the specification listed below. Design and specifications are subject to change without notice.
INFORMATION The software pre-installed in the TOSHIBA Digital Televisions consists of multiple, independent software components. Each software component is copyrighted by TOSHIBA or a third party. The TOSHIBA Digital Televisions uses software components that are distributed as freeware under a third-party end-user license agreement or copyright notice (hereinafter referred to as a “EULA”).
English INFORMATION Exhibit A Portions of this software are copyright © <2007> The FreeType Project (www.freetype.org). All rights reserved Exhibit B ICU License - ICU 1.8.1 and later COPYRIGHT AND PERMISSION NOTICE Copyright © 1995-2006 International Business Machines Corporation and others All rights reserved.
INFORMATION English DVB is a registered trademark of the DVB Project HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Printed on recycled paper. 100% Chlorine free. © TOSHIBA Television Central Europe Sp. z o.o. All rights reserved. Reproduction in whole or part without written permission is strictly prohibited. TOSHIBA Television Central Europe Sp. z o.o. ul.
English INFORMATION Notes For your own records Cleaning the screen and cabinet… Turn off the power, clean the screen and cabinet with a soft, dry cloth. We recommend that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage. Disposal… The following information is only for EU-member states: Disposal of products The crossed out wheeled dust bin symbol indicates that products must be collected and disposed of separately from household waste.
