Operation Manual

English
22
TUNING THE TELEVISION
Auto Scan
Scan All Channels.
0%
End Frequency (KHz) 362000
6900
100
362000
Modulation
Symbol Rate (Ksym/s)
Network ID
Scan
Scan Mode
Start Frequency (KHz)
Advance
Auto
Select Exit
EXIT
NOTE: The options Start Frequency, End
Frequency, Modulation, Symbol Rate, and
Network ID is available for Advance mode only.
Press ▲ or ▼ to highlight  and press
► or to start scanning. Press 
to cancel, or press  to stop scanning.
Update Scan
Search the new channels that are not in the
programme list.
Pressand press ◄ or ► to select
.
Press ▼ to highlight and press
► or .
Select  and press to start
scanning.
Update Scan
Cancel Exit
EXITRETURN
Status: Scanning..
Digital Channels: 0 Analogue Channels: 0
0%
NOTE: This option is available for DVB_T only.
Single RF Scan
Scan single RF channels. You can check the
Signal Strength and the Signal Quality.
Select  from the  menu.
Highlight  and press ► or
to enter.
Press ◄ and ► to select the ,
then press to start scanning.
0
Single RF Scan
BackScan Exit
EXITOK RETURN
Scan single RF channel. (Digital Only)
Start Frequency (KHz)
Modulation
Symbol Rate (Ksym/s)
474000
6875
Auto
Signal Strength
0%
NOTE: This option is available for DVB_C and
DVB_T only.
Favorite Network Select
If there are more than two networks detected
after running the  in  menu,
you can select the network you prefer.
Select  from the  menu.
Highlight and
press ► or to enter.
Auto Scan
Update Scan
Single RF Scan
Favorite Network Select
Channel Skip
Channel Sort
Channels
Clean Channel List
Channel Edit
Select Back Exit
EXIT
Enter
OK RETURN
Downloaded from www.Manualslib.com manuals search engine