Important Safeguards Welcome to Toshiba Connecting your TV Using the Remote Control Setting up your TV Using the TV’s Features 11/01/2005, 1:55 PM 1 J3S20121A(E)_COVER Appendix 27A45C
Important Safeguards Dear Customer, Child Safety Thank you for purchasing this Toshiba TV. This manual will help you use the many exciting features of your new TV. Before operating the TV, please read this manual completely, and keep it nearby for future reference.
1) 2) 3) 4) Installation, Care, and Service Installation Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Follow these recommendations and precautions and heed all warnings when installing your TV: 5) Do not use this apparatus near water. 17) 6) Clean only with a dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Important Safeguards 24) Always operate this equipment from a 120V AC, 60 Hz power source only. 30) [This item applies to projection TVs only.] If the air temperature rises suddenly (for example, when the TV is first delivered), condensation may form on the lenses. This can make the picture appear distorted or the color appear faded. If this happens, turn off the TV for 6 to 7 hours to allow the condensation to evaporate.
Exploring your new TV ................................................................................................................................ 6 Selecting a location for the TV .................................................................................................................... 6 Important Safeguards Important Safety Information .......................................................................................... 2-4 Welcome to Toshiba...........................................
Welcome to Toshiba Welcome to Toshiba Congratulations! You have purchased one of the finest color TVs on the market. The goal of this manual is to guide you through setting up and operating your Toshiba TV as quickly as possible. You may need to purchase other audio or video cables to connect your equipment. See “Connecting your TV” on page 7 for more information. Please read all the safety and operating instructions carefully before you begin.
Important Safeguards Connecting your TV Welcome to Toshiba • A coaxial cable is the standard cable that comes in from your antenna or cable converter box. Coaxial cables use “F” connectors. • Standard A/V (audio/video) cables are usually color coded according to use: yellow for video and red and white for audio. The red audio cable is for the stereo right channel, and the white audio cable is for the stereo left (or mono) channel.
Connecting a cable converter box This television has an extended tuning range and can tune most cable channels without using a cable company supplied converter box. Some cable companies offer “premium pay channels” in which the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device, which is generally provided by the cable company.
This connection allows you to watch DVD/satellite, VCR, or TV programs. You can record from the satellite receiver and TV, as well as record one TV channel while watching another channel.
Connecting two VCRs This connection allows you to record (dub/edit) from one VCR to another VCR. You will also be able to record from one TV channel while watching another channel. You will need: • two coaxial cables • two sets of standard A/V cables Stereo VCR / Playback To antenna Note: IN IN from ANT Do not connect the same VCR to the output and input jacks on the TV at the same time. For better picture quality, if your VCR has Svideo, you can use an S-video cable instead of the standard video cable.
Important Safeguards Using the remote control Preparing the remote control for use Installing the remote control batteries To install the batteries: 1. Open the battery cover on the back of the remote control. Note: The TV remote control may not operate your VCR, DVD player, or cable TV converter. Refer to the owner's manual supplied with the applicable equipment to see which features may be available.
To control a cable TV converter: Program the remote control to recognize the brand of your converter (see “Programming the remote control to operate your other devices” below). The buttons shown at right will control the cable TV converter. Press the CABLE button first.
VCR 23 20 00, 17 01 11 09 15, 29 19 05 01 21 24 00 03, 16 02 13 RCA Saba Sampo Samsung Sharp Silvania SMC Sony Technics Thomson Toshiba Wave Yamaha Zenith Vialta Funai 01,06 01 14 10 08 32, 18 25 04, 26, 27, 28 00 01 03 22 00, 30 07, 12 31 32, 18 RCA DSS Regency Samsung Scientic Atlanta Sprucer Standard Comp Texscan Tocom Unika United Satellite Universal Vid Tech Video Way Viewstar Zenith Zenith Satellite 73 29 35 16, 13 35 39, 17, 48, 44 58, 40 49 54, 01, 12, DVD PLAYER Aiwa Apex Denon Ferguson Hitac
Learning about the remote control POWER turns the TV on and off SLEEP programs the TV to turn off at a set time (page 25) TV/VIDEO selects the video input source (page 24) CH + / – cycles through programmed channels (page 16) TV/VCR/CABLE/DVD TV/VCR/CABLE/DVD select TV, VCR, Cable, or DVD mode (page 11) POWER TV VCR CHANNEL NUMBERS allow direct access to channels (page 16) 1 2 3 4 5 6 100 7 8 9 0 DVD VOLUME + / – adjusts the volume level +10 Channel Numbers CH RTN (Channel Return) retu
Important Safeguards Setting up your TV After you have installed the batteries and programmed the remote control, you need to set some preferences on the TV using the menu system. You can access the menu system with the buttons on the remote control. Changing the on-screen display language POWER You can choose from three different languages (English, French, and Spanish) for the on-screen display of adjustment menus and messages.
Adding channels to the TV’s memory When you press CH +/- on the remote control or CHANNEL ▼/▲ on the TV front panel, your TV will stop only on the channels stored in the TV’s channel memory. Follow the steps below to program channels into the memory. Programming channels automatically Your TV can automatically detect all active channels and store them in its memory. After the TV has stored the channels in its memory automatically, you can add or erase specific channels manually.
POWER Adjusting the channel settings TV VCR 1 2 3 4 5 6 100 7 8 9 0 Important Safeguards Using the TV’s features CABLE DVD Switching between two channels +10 You can switch between two channels without entering an actual channel number each time. CH + VOL – Welcome to Toshiba To switch between two channels: 1. Select the first channel you want to view. 2. Select a second channel using the Channel Number buttons (0–9, 100). 3. Press CH RTN. The previous channel will be displayed.
To clear your favorite channels: 1. Select a channel you want to clear. 2. Press MENU, then press or to display the OPTION menu. 3. Press ▲ or ▼ to highlight FAVORITE CH. 4. Press or to display the FAVORITE CH menu. SET/CLEAR will be highlighted.
SETUP OPTION LOCK START OFF GAME TIMER NEW PIN CODE SELECT OFF START ADJUST POWER TV VCR 1 2 3 4 5 6 100 7 8 9 0 Welcome to Toshiba CH LOCK VIDEO LOCK Note: If you forget your PIN code, press RECALL four times within five seconds from the BLOCKING menu. The PIN code will be released (BLOCKING RESET status restored). CH PICTURE AUDIO Important Safeguards 4. Use the Channel Number buttons (0–9) to enter your PIN code.
To unlock channels: 1. Press MENU, then press or to display the OPTION menu. 2. Press ▲ or ▼ to highlight LOCK and then press or to display the BLOCKING menu. 3. Use the Channel Number buttons (0–9) to enter your PIN code, then press ENTER. The LOCK menu appears. 4. Press ▲ or ▼ to highlight CH LOCK and press or to display the CH LOCK menu. 5. Press or to highlight CLEAR, and then press ENTER. This clears all channels from the list of locked channels. 6. Press EXIT to return to normal viewing.
Important Safeguards Labeling channels Channel labels appear over the channel number display each time you turn on the TV, select a channel, or press the Recall button. You can choose any four characters to identify a channel. POWER TV VCR CABLE 1 2 3 4 5 6 100 7 8 9 0 DVD To create channel labels: 1. Select a channel you want to label. 2. Press MENU, then press or until the OPTION menu appears. 3. Press ▲ or ▼ to highlight CH LABEL.
Setting the clock You must set the clock before you can program the ON/OFF timer. To set the clock: (Example: 8:30 AM) 1. Press MENU, then press or to display the OPTION menu. 2. Press ▲ or ▼ to highlight ON/OFF TIMER. POWER TV VCR CABLE 1 2 3 4 5 6 100 7 8 9 0 DVD +10 CH PICTURE AUDIO SETUP OPTION LANGUAGE CH LABEL FAVORITE CH LOCK ON/OFF TIMER COLORSTREAM SELECT SET ENGLISH START START START ON OFF SET DVD CH + VOL – VOL + MENU/ ENTER Menu/ Enter ADJUST ENTER CH – 3.
Important Safeguards 5. Press ▲ or ▼ to set the desired hour, then press .
Adjusting the picture quality You can adjust the picture quality to your personal preferences, including the contrast, brightness, color, tint, and sharpness. The qualities you choose will be stored automatically in your TV’s memory so you can recall them at any time. To adjust the picture quality: 1. Press MENU, then press or POWER VCR 1 2 3 4 5 6 100 7 8 9 0 +10 to display the PICTURE menu. CH + SETUP OPTION CONTRAST BRIGHTNESS COLOR TINT SHARPNESS SELECT 64 32 32 0 32 VOL – 2.
Important Safeguards Setting the sleep timer POWER You can set the TV so it turns off automatically. 1 2 3 4 5 6 100 7 8 9 0 +10 CH + VOL – CH – EXIT Using the closed caption feature RECALL RESET CAP/TEXT To view captions or text: 1. Select the desired program. Closed captioned programs are usually marked in your local TV listing as “CC.” 2. Press CAP/TEXT repeatedly to select caption or text mode.
Adjusting the sound POWER POWER TV TV VCR VCR 1 2 3 4 5 6 100 7 8 9 0 Muting the sound CABLE CABLE DVD DVD Press MUTE to temporarily turn off the sound. While the sound is off, the screen will display the word MUTE in the lower right-hand corner. To restore the sound, press MUTE again. +10 Selecting stereo/SAP broadcasts CH CH++ You can listen to high-fidelity stereo sound with the Multi-channel TV Sound (MTS) feature.
Important Safeguards Adjusting the sound quality You can change the sound quality of your TV by adjusting the bass, treble, and balance. To adjust the sound quality: 1. Press MENU, then press or POWER TV VCR 1 2 3 4 5 6 100 7 8 9 0 until the AUDIO menu appears. CH DVD +10 SETUP OPTION BASS TREBLE BALANCE SURROUND OFF STABLE SOUND OFF SELECT 32 32 0 VOL Ð VOL + MENU/ ENTER Menu CH Ð RECALL TV/VIDEO EXIT ADJUST VOL 2. Press ▲ or ▼ to highlight the item you want to adjust. 3.
Using the StableSound® feature The StableSound feature limits the highest volume level to prevent extreme changes in volume when the signal source is changed. To turn on the StableSound® feature: 1. Press MENU, then press or until the AUDIO menu appears. 2. Press ▲ or ▼ to highlight STABLE SOUND. 3. Press or to highlight ON. CH PICTURE AUDIO SETUP OPTION BASS TREBLE BALANCE SURROUND OFF STABLE SOUND ON OFF SELECT 32 32 0 ADJUST To turn off the StableSound® feature: Highlight OFF in step 3 above.
Important Safeguards Appendix Troubleshooting Before calling a service technician, please check the following table for a possible cause of the problem and some solutions. No sound, picture OK • The sound may be muted. Press VOLUME. • The station may have broadcast difficulties. Try another channel. • The MTS feature may be in SAP mode. Press the MTS button on the remote control until STEREO (or MONO) mode is active. Poor sound, picture OK • The station may have broadcast difficulties.
Specifications Notes: • This model complies with the specifications listed below. • Designs and specifications are subject to change without notice. • This model may not be compatible with features and/or specifications that may be added in the future. Picture tube 676 mm (27 in.) diagonal (Screen size is approximate.) Television system NTSC standard Channel coverage VHF: 2–13 UHF: 14–69 Cable TV: 4A, A-5–A-1, A-I, J–W, W+1–W+84 Power source 120V AC, 60 Hz Power consumption 125 W Audio power 2.
for 25” to 31” Television Models Toshiba of Canada Limited (“TCL”) makes the following limited warranties to original consumers in Canada. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS TELEVISION AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE. PRODUCTS PURCHASED ANYWHERE OUTSIDE OF CANADA, INCLUDING, WITHOUT LIMITATION, THE U.S.A. AND MEXICO, AND USED IN CANADA, ARE NOT COVERED BY THESE WARRANTIES.
TEL.: (905) 470-5400 Service Centers: TORONTO: 191 McNABB STREET, MARKHAM, ONTARIO, L3R 8H2, CANADA TEL.: (905) 470-5400 MONTREAL: 18050 TRANS CANADA, KIRKLAND, QUEBEC, H9J-4A1, CANADA TEL.: (514) 390-7766 VANCOUVER: 22171 FRASERWOOD WAY, RICHMOND, B.C., V62 1J5, CANADA TEL.: (604) 303-2500 ColorStream®, FST Pure® and StableSound® are registered trademarks of Toshiba America Consumer Products, L.L.C. GameTimer is a trademark of Toshiba America Consumer Products, L.L.C.