Operation Manual

English
27
CONTROLS AND FEATURES
Active backlight control
When Active backlight control is activated it will
automatically optimise the backlighting levels for
dark scenes.
In the PICTURE menu press ▼ to select
Active backlight control.
Picture Settings
Off
On
OK
Active Backlight Control
3D Colour Management
Base Colour Adjustment
DNR
PICTURE
Off
Watch TV
EXIT
Back
RETURN
Using ◄ or ► to select On or Off.
3D Colour management
When 3D Colour management is selected it
allows the ‘Base colour adjustment’ feature to
become available.
In the PICTURE menu press ▼ to select
3D Colour management.
Picture Settings
Off
Off
OK
OK
Active Backlight Control
3D Colour Management
Base Colour Adjustment
PICTURE
On
DNR
Watch TV
EXIT
Back
RETURN
Press ◄ or ► to select On or Off.
Base colour adjustment
The Base colour adjustment feature allows the
adjustment of individual colours to suit personal
preference. This can be useful when using an
external source. It only can be adjusted when 3D
Colour Management is set to On.
In the PICTURE menu press ▲ or ▼ to select
Base Colour Adjustment, then press
.
Hue Saturation
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Brightness
Red
Green
Blue
Yellow
Magenta
Cyan
Reset
Base Colour Adjustment
OK
Watch TV
EXIT
Back
RETURN
Press ▲ or ▼ to select an option, then press
to enter the adjustment setting window.
Press ◄ or ► to select Hue, Saturation
or Brightness, the press ▲ or ▼ to adjust
the settings as required.
Hue Saturation
0 00
Brightness
Red
To return to the original factory settings select
Reset and press
.
DNR – Digital Noise
Reduction
DNR enables you to ‘soften’ the screen
representation of a weak signal to reduce the
noise effect.
Select DNR from the PICTURE menu.
Use ◄ or ► to select from Low, Middle,
High or Off. The differences may not
always be noticeable (for the best result
use lower settings as picture quality can be
lost if the setting is too high).