Operation Manual

English
17
TUNING THE TELEVISION
Manual tune
The television can be tuned-in manually using
Manual tuning. For example: if the television
cannot be connected to a media recorder/
decoder with a SCART lead or to tune-in a station
on another System.
Use ◄ and ►to move across the screen and
select any of these Manual Tune options.
Store
OK
Programme skip: Off
D / K A 0S 10
Manual tuning
Watch TV
EXIT
Back
RETURN
1 2 3 4 5 6 7 8
Programme:1.
The number to be pressed on the remote
control.
System:2.
Specific to certain areas.
Colour system:3.
Factory set to Auto, should only be changed
if problems are experienced, i.e. NTSC input
from external source.
Programme skip:4.
means nothing has been stored or the
facility to skip the channel is ON. See page 18.
Channel:5.
The channel number on which a station is
being broadcast.
Search:6.
Search up and down for a signal.
Manual fine tuning:7.
Only used if interference/weak signal is
experienced. See page 34.
Station:8.
Station identification. Use the navigation ring
▲ or ▼ and ◄ or ► buttons to enter up to
seven characters.
To allocate a programme position on the
television for a decoder and media recorder: turn
the decoder on, insert a pre-recorded film in the
media recorder and press PLAY, then manually
tune.
Using ◄ or ►to select the SET UP menu,
with ▼ to highlight Manual tuning, press
to select.
Watch TVBack
RETURN EXIT
Language English
UK
OK
OK
OK
OK
OK
Country
Auto tuning
Manual tuning
AV connection
Quick Setup
Picture position
OK
Reset TV
SET UP
Use ▲ and ▼ to highlight the programme
position required e.g. we suggest Prog. 0
for a media recorder.
Watch TVSelect
EXIT
Back
RETURN
OK
Sort
Prog. Channel
C3
C5
C6
C69
C69
C69
Station
0
1
2
3
4
5
Manual tuning
Different Channel numbers may be displayed.
Press ► to select. If the programme
is skipped, Programme skip must be
removed before storing.
Store
OK
Programme skip: Off
D / K A 0S 10
Manual tuning
Watch TV
EXIT
Back
RETURN
4
Press ► to select System and use ▲ or
▼ to change if required.
Then press ► to select Search.