AV 0* LV 0* ANALOGUE Series
English Contents Safety Precautions.....................4 Watching TV Programmes................... 16 Air Circulation....................................... 4 Changing the Position.......................... 17 Heat Damage....................................... 4 Power Supply....................................... 4 Displaying the On-screen Information........................................... 17 Do......................................................... 4 General Controls........................
HDMI 1 Audio....................................... 30 Blue Screen.......................................... 24 Frequently Asked Questions.....31 Side Panel............................................ 24 Specifications and Accessories................................33 Picture still............................................ 24 Enjoying Photo through USB Port......................................25 Photo Viewer specifications................. 25 Opening Photo Viewer.........................
English Safety Precautions This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products and some points may not apply to the goods you have just purchased.
Where to install Locate the television away from direct sunlight or other strong lights. Soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen. Place the TV set on a stable, level surface that can support the weight of the TV.
English The Remote Control Simple at-a-glance reference of your remote control.
Before connecting any external equipment, turn off all main power switches. If there is no switch remove the mains plug from the wall socket. Connect the power cord into the AC IN socket found at the back of the TV. For 19/22AV70** HDMI 1 INPUT SOCKET HDMI 2 INPUT SOCKET Note: SCART can support Canal+ decoder. For 26/32AV70** HDMI 1 INPUT SOCKET HDMI 2 INPUT SOCKET Note: SCART1 and SCART 2 can support Canal+ decoder.
English For 32/40LV70** HDMI 1 INPUT SOCKET HDMI 2 INPUT SOCKET HDMI® (High-Definition Multimedia Interface) is for use with a DVD, decoder or electrical equipment with digital audio and video output. It is designed for best performance with 1080i highdefinition video signals but will also accept and display 480i, 480p, 576i, 576p, 720p and 1080p. HDMI1 also support VGA, SVGA, XGA, WXGA and SXGA.
The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI source device or uncompressed digital video from a DVI (Digital Visual Interface) source device. This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) programme material in digital form from EIA/CEA-861-D–compliant [1] consumer electronic devices (such as a set-top box or DVD player with HDMI or DVI output). For acceptable video signal formats.
English Acceptable Video signals through HDMI terminals Format Resolution V. Frequency H. Frequency Pixel Clock Frequency 480i 720 x 480i 60Hz 15.734KHz 27MHz 480p 720 x 480p 60Hz 31.5KHz 27MHz / 27.027MHz 576i 720 x 576i 50Hz 15.625KHz 27MHz 576p 720 x 576p 50Hz 31.25KHz 54MHz 720p 1280 x 720p 50Hz 37.5KHz 74.25MHz 720p 1280 x 720p 59.94Hz / 60Hz 44.9KHz / 45KHz 74.17MHz / 74.25MHz 1080i 1920 x 1080i 50Hz 28.125KHz 74.25MHz 1080i 1920 x 1080i 59.94Hz / 60Hz 33.
English Connecting a Computer With either an RGB/PC or an HDMI connection, you can watch your computer’s display on the television and hear the sound from the televisions speakers. To connect a PC to the RGB/PC terminal • When PC input mode is selected, some of the television’s features will be unavailable e.g. Manual Settings in the SETUP menu, Colour, Tint, Sharpness and Black/White Level in the PICTURE menu.
English Using the Controls While all the necessary adjustments and controls for the television are made using the remote control, the buttons on the television may be used for some functions. For 19/22AV70** For 26/32AV70** Note: 19/22/26/32AV70** series does not have HDMI 3 Input.
English For 32/40LV70** Switching On Using the Controls If the RED LED is unlit check that the plug is connected to the power supply. If the picture does not appear press on the remote control, it may take a few moments. To put the television into Standby press on the remote control. To view the television press again. The picture may take a few seconds to appear. To change the volume press . To change the channel press P . Press MENU and ▲ or ▼, ◄ or ► to control the sound and picture options.
English Startup Application Before switching on the television put your decoder and media recorder to Standby if they are connected. To set up the television use the buttons on the remote control as detailed on page 6. Quick Setup Auto Tuning For 1st use, plug in the television and press the button. The Quick Setup screen will appear. Note: As new services are broadcast, it will be necessary to re-tune the television in order to view them.
From the SET UP menu, press p or q to select Manual tuning. Press to display the Manual tuning menu. Press u than press p or q to select the programme position you want to arrange and press ◄ again. Station: Station identification. Use the p or q and ◄ or ► buttons to enter up to seven characters. Use p or q to highlight the desired position. We suggest Pos. 0 for a media recorder. Manual tunning Programme 1 B/G A C69 0 Note: Different Channel numbers may be displayed. Press to select.
English Skip From the SET UP menu, press p or q to select Manual tuning menu, and then press . To prevent certain channels from being viewed, positions can be skipped. From the SET UP menu, press p or q to select Manual tuning. Press to display the Manual tuning menu. Press u than press p or q to select the programme position you want to arrange. Use p or q to highlight the position to be skipped and press to select. Press q to select the new position “2”, then press t.
English Changing the Position Enter the desired position number using the Number buttons on the remote control. For positions below 10, use 0 and the requires number e.g., for position 1. 3 You can also change the position by using P or P . The position will be displayed on the screen with the Mono/Stereo/Dual audio status. Note: Changing positions between different format channels will takes several seconds. Displaying the On-screen Information Press to display the following onscreen information.
English General Controls The General Controls will allow you to select channels and information, use the sound controls, personalise the picture style, and select external equipment. Selecting Channels Using the Quick Access (Except PC) To select a channel use the numbered buttons on the remote control. Channels can also be selected using P and P . The quick access menu helps you access some options quickly such as Picture Mode, Picture Size, and Sleep Timer.
Volume controls and mute sound Volume Press or Stable Sound® The Stable Sound feature limits high volume levels in order to prevent the extreme changes in volume that can occur when channels are changed or a programme switches to a commercial. to adjust the volume. Sound Mute Press once to turn the sound off and again to cancel. Press MENU and ◄ or ► to select SOUND. Press q to highlight Stable Sound and ◄ or ► to select On or Off.
English Widescreen viewing Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats. Native When using a PC connected via HDMI this setting will show the picture without over scan, i.e. WYSIWYG. This option is only available when watching video signal source via HDMI. Wide Use this setting when watching a widescreen DVD, widescreen video tape or a 16:9 broadcast (when available). Due to the range of widescreen formats (16:9, 14:9, 20:9 etc.
English Available Picture Size and Position Control Screen Mode Size RF ATV/ Video RF ATV/ Video HDMI/ HDMI/ Component/ Component/ /S-video / /S-video / 1440x576p 1440x480p HDMI/ HDMI/ Compornent / Compornent/ 720p 1080i HDMI/ HDMI)/ PAL/ NTSC3.58/ SECAM/ NTSC4.43/ 576i/ PAL60/ 576P 480i/ 480P Native (*only available for HDMI input) Wide 4:3 Super Live (Panoramic scaled.
English Picture Controls Most of the picture controls and functions are available in both digital and analogue modes. Note: features not available will be greyed out. Picture Position Picture Preferences Press MENU and ◄ or ► to display the SET UP menu. You can customise current picture mode settings while selecting User. Press ▲ or ▼ to select Picture position. From the PICTURE menu select Picture settings and press .
Press ▲ or ▼ to select Color Temperature and then press ◄ or ►. The Base Colour adjustment feature allows the adjustment of individual colours to suit personal preference. This can be useful when using an external source. It only can be adjusted when 3D Colour Management is set to On. The Color Temperature menu displays. Picture settings From the PICTURE menu select Base Colour adjustment and press . Press , then press ▲ or ▼ to select an item you want to adjust.
English Digital Noise Reduction Press MENU, and then press ◄ or ► to display the FUNCTION menu. DNR (Digital Noise Reduction) enables you to “soften” the screen representation of a weak signal to reduce the noise effect. Press ▲ or ▼ to select Auto format and ◄ or ► to select On or Off. From the PICTURE menu, press ▲ or ▼ to select DNR. 4:3 Stretch When 4:3 stretch is activated, this function will switch 4:3 format programmes into a full screen picture.
The Photo Viewer allows you to playback JPEG files from a USB storage device. Photo Viewer specifications Press ▲ or ▼ to select the file name of the photo you want to view. When you select a folder name, press OK to move to the next hierarchy. To move back to the previous hierarchy, press ▲ or ▼ key to highlight the folder and press OK. Data type: JPEG Exif ver2.2 File format: DCF ver1.
English Enjoying Music through USB Port The MP3 Player allows you to playback MP3 files from a USB storage device. Music Player specifications • To select the previous or next MP3, press ▼ or ▲.
English Other features Panel Lock On Timer Position Panel lock disables the buttons on the television. All buttons on the remote control can still be used. Use the On timer position if you want the TV to turn itself on in a selected channel. From the FUNCTION menu, press ▲ or ▼ to select Panel lock. Press MENU, and then press ◄ or ► to display the TIMER menu. Press ◄ or ► to select On or Off. Press ▲ or ▼ to select On timer position. Press ◄ or ► to select the channel the TV should turn on in.
English Text Services and Text Information This television has a multi-page text memory, which takes a few moments to load. It offers two Modes of viewing text – Auto will display Fastext, if available. LIST will store your four favourite pages. Selecting modes Control Buttons The text character set will be automatically chosen based on the language setting in the SET UP menu. Below is a guide to the functions of the remote control text buttons.
English PC Settings • Most of the picture controls and functions are available. However features not available will be greyed out. • In the PC input mode, the Manual Setting is not displayed. • First press until the video input mode list appears on the screen, then press ▲ or ▼ and to select the PC input mode. in order • This function may not be available for some signal or if no signal is received.
English Input Selection and AV Connections Use the Input Selection feature if the television does not switch over automatically when using an external device. Input Selection Input Signal Selection Use the Input Selection window if the television does not switch over automatically. You can select source of AV or S-VIDEO from this function. Pressing , a list will appear on-screen showing all external equipment. Use ▲ or ▼ to highlight and OK to select.
Below are the answers to some of the most common queries. For more information go to www.toshiba.co.uk Q A Q A Select the Manual tuning in the SET UP menu. Highlight the station and press OK, then press ◄ or ► to select Manual fine tuning. Why is there no sound or picture? Check that the television is on and that all connections are made properly.
English Q Why don’t the devices connected via HDMI operate properly? A Make sure to use cables with the HDMI ® logo ( ). Some early HDMI equipment may not work properly with the latest HDMI TV products, due to adoption of new standards. Q A Q Q Why are the LEDs on the front of the television indicate? A Check the following table. Why is the VCR/DVD picture in black and white? Check the correct input has been chosen: S-VIDEO or AV.
Display Broadcast Systems/Channels PAL-I UHF UK21-UK69 PAL-B/G UHF E21-E69 VHF E2-E12, S1-S41 SECAM-L UHF F21-F69 VHF F1-F10, B-Q SECAM-D/K UHF R21-R69 VHF R1-R12 Video Input PAL, SECAM, NTSC 3.58/4.
English Cleaning the screen and cabinet… Turn off the power, clean the screen and cabinet with a soft, dry cloth. We recommend that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage. Disposal… The following information is only for EU-member states: Disposal of products The crossed out wheeled dust bin symbol indicates that products must be collected and disposed of separately from household waste.
