32BL505B DIGITAL Series "Register your TV online at: www.toshiba.co.
User Manual DIGITAL Series “Register your TV online at: www.toshiba.co.uk/registration” -1- 32BL505B_MB62_[GB]_(IB_INTERNET)_DVB-T_(3910UK)_10076099.indd 1 21.01.
Digital Switchover 8IFO EPFT TXJUDIPWFS IBQQFO ,FFQ UIJT JNQPSUBOU JOGPSNBUJPO BCPVU IPX UP SF UVOF ZPVS 57 EVSJOH UIF EJHJUBM 57 TXJUDIPWFS $PQFMBOE TXJUDIFT PO 0DUPCFS 5IF FYBDU EBUF ZPV TXJUDI EFQFOET PO UIF USBOTNJUUFS ZPV BSF TFSWFE CZ 5P DIFDL XIFO ZPV TXJUDI HP UP %JHJUBM 6,µT QPTUDPEF DIFDLFS PO XXX EJHJUBMVL DP VL IFDL ZPVS *57 OFXT $ TFSWJDF PS MPPL BU 5FMFUFYU QBHF UP TFF XIBU 57 SFHJPO ZPVµSF JO Television in the UK is going digital, bringing us all more choi
Re-tuning: TOSHIBA Freeview Products Toshiba Digital TV This guide can be used to help you re-tune the following product with the remote control below. Make sure your TV is on and press 80 for the BBC News channel SCREEN LANG SUBTTL PIP 1 2 3 4 5 6 7 8 9 1 ) Press MENU and press ◄ or ► to select Install and Retune and press OK. Press ▲ or ▼ to select Automatic channel scan (Retune) to start the process.
Manual Re-tuning If your Freeview TV or box picks up a different regional service to your preferred service (e.g. BBC England instead of BBC Scotland, or ITV Central instead of ITV Anglia), you can use this manual re-tune If you are missing some services you may find they have moved to channel 800 or above, this guide will help you put them in your preferred position. If you find manual re-tuning too difficult, contact your local electrical retailer or installer.
4 ) Write down the “RF Channel” numbers for your transmitter using the Group boxes here: 5 ) Press MENU and use ◄ or ► to select Install and Retune. 6 ) Select Manual Channel Scan from the Installation menu and press OK. MENU OK OK 7 ) Select Search Type as Digital by using ◄ or ►. OK 8 ) Select Channel and use ◄ or ► to change the channel number. OK OK 9 ) Press OK to start search. 10 ) Press MENU button. You should find that you now have your preferred service installed.
Contents Renaming a Channel ........................................ 24 Locking a Channel ............................................ 24 Viewing Info Banner, Electronic Programme Guide .................................................................... 25 Viewing Info Banner.......................................... 25 Electronic Programme Guide............................ 25 Language Selection .............................................. 26 Language Settings ............................................
Date/Time Settings ........................................... 33 Sources............................................................. 33 Other Settings ................................................... 33 Using a Conditional Access Module ................. 33 Setting Timers, Setting Date/Time ........................ 34 Timers ............................................................... 34 Setting Sleep Timer .......................................... 34 Setting Programme Timers ......................
Safety Precautions This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products and some points may not apply to the goods you have just purchased.
Installation and Important Information Where to install Sturdy tie (as short as possible) P Clip * Button and stand style is dependent on model. P Clip “P” Clip position on TV is dependent on model. Locate the television away from direct sunlight and strong lights. Soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen. Place the TV on a stable, level surface that can support the weight of the TV.
Important safety information USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. Headphone Warning Loud music can damage your hearing irreversibly. Do not set the volume to a high level when listening through headphones, particularly for extended listening periods.
Important safety information (continued) • This set should only be connected to an 220-240V AC 50Hz mains power supply. Do not attempt to connect it to any other type of supply. • The unit becomes warm when in operation. Do not place any covers or blankets on the unit in order to prevent overheating. • The socket outlet must be installed near the equipment and is easily accessible. The ventilation holes should not be blocked. Do not set up near radiators. Do not place in direct sunshine.
Removing the pedestal stand Removing the pedestal stand (1) Carefully lay the front of the TV face down on a flat, cushioned surface such as a quilt or blanket. Leave the stand protruding over the edge of the surface. Note: Extreme care should always be taken when removing the pedestal stand to avoid damage to the LCD panel. (2) Remove the four screws on the stand. This will allow removal of the pedestal stand.
The Remote Control Simple at-a-glance reference of your remote control. Standby / On mode To switch your TV to standby mode. Subtitle On/Off Mono-Stereo / Dual I-II To enable the displaying of subtitles. Stereo/Bilingual Transmissions Image size Expand (in TXT mode) Red button SCREEN LANG SUBTTL PIP Blue button Green button 1 2 3 4 5 6 7 8 9 0 Teletext / Mix To call up text services in analogue broadcasts and interactive services in digital mode.
Connecting External Equipment Before connecting any external equipment, remove the mains plug from the wall socket. Side View COMMON INTERFACE The Common Interface is for a Conditional Access Module (CAM). Coax.OUT YPbPr RGB/PC Input Aerial Input SPDIF 5Vdc Max:500mA SIDE AV DIGITAL AUDIO Socket H D MI 1 H DM I 2 USB Input HDMI Input Sockets YPbPr SIDE AV Headphone SCART Socket * a decoder could be Digital Satellite, Free to Air or any other compatible decoder. decoder* TV Aerial cable:.....
Connecting an HDMI® or DVI Device to the HDMI Input NOTE: • The recommended HDMI-to-DVI adaptor cable length is 6.6 ft (2m). • • An HDMI-to-DVI adaptor cable transfers video only. Separate analogue audio cables are required. • Some early HDMI equipment may not work properly with your latest HDMI TV. SIDE AV Input SIDE AV • Supported Audio format: Linear PCM, sampling rate 32/44.1/48kHz. To Connect an HDMI Device Connect an HDMI cable (type A connector) to the HDMI terminal.
Connecting a Computer To Connect a Computer Connecting to a DVD Player via YPbPr With either an RGB/PC or an HDMI connection, you can watch your computer’s display on the television and hear the sound from the television’s speakers. Some DVD players are connected through COMPONENT SOCKETS (YPbPr). In this case, you must use the supplied Component YPbPr video connection cable for enabling connection. First, plug the single jack of the cable to the TV’s YPbPr socket (side).
Connecting a USB Memory To Connect a USB Disk • You can connect a USB disk to your TV by using the USB input of the TV. This feature allows you to display/play music, photo or video files stored in a USB stick. • It is possible that certain types of USB devices (e.g. MP3 Players) may not be compatible with this TV. • You may back up your files before making any connections to the TV set in order to avoid any possible data loss.
Power Save Mode Environmental Information • This television is designed to consume less energy to save environment. You not only help to save the environment but also can save money by reducing electricity bills, thanks to the energy efficiency feature of this TV. To reduce energy consumption, you should take the following steps: You can use Power Save Mode setting, located on page 27.
Controlling the TV A wide variety of external equipment can be connected via the sockets located on the side and back of the TV. Whilst all the necessary adjustments and controls for the TV are made using the remote control, the button on the left side of the TV may be used for some functions.
Initial Installation Before switching on the television put your decoder and media recorder to Standby if they are connected and ensure the aerial is connected to your television. To set up the television use the buttons on the remote control as detailed on page 13. MPORTANT: Ensure that the aerial is connected and a Common Interface module is not inserted before switching on the TV for the first time installation. 1. Connect the mains plug and switch the TV to on button.
Auto Tuning Auto Tuning As new services are broadcast, it will be necessary to retune the television in order to view them. • Auto Tuning will completely retune the television and can be used to update the channel list. It is recommended that Auto Tuning is run periodically to ensure that all new services are added. All current channels and settings, i.e. locked channels, will be lost. • Press MENU button on the remote control and select Install and Retune by using Left or Right button.
Manual Tuning, Analogue Fine Tuning The television can be tuned-in manually using Manual Search feature. Digital Manual Search Analogue Manual Search The feature is available for service engineers or can be used for direct channel entry if the multiplex channel is known. The television can be tuned-in manually. For example: if the television cannot be connected to a media recorder/decoder with a SCART lead or to tune-in a station on another System.
General Operation Stereo and Bilingual Transmissions Standby Notifications If stereo or dual language broadcasts are transmitted, the word Stereo or Dual will appear on the screen each time positions are changed, disappearing after a few seconds. If the broadcast is not in stereo, the word Mono will appear. If the TV switches off while in No Signal mode, the following on-screen message will be displayed on the next switch-on: Stereo… Press LANG. to select Stereo or Mono.
Channel List, Sorting Programmes, Programme Locking You can view stored channels and sort them by using the Channel List feature. Viewing Channel List Moving a Channel The channel order may be changed to suit your personal preference. • Highlight the desired channel by using Up or Down buttons. • Select Channel List from the main menu and press OK button. The following menu will be displayed: • Select Move option in the channel list and press OK button.
Viewing Info Banner, Electronic Programme Guide Viewing Info Banner • Press GREEN button to list the schedule. • Press INFO button. The information screen will appear giving details of the channel and programme currently being viewed. • Press BLUE button to display filtering options. Note: There are alternative views of EPG screen. Button functions will be displayed at the bottom of the menu screen.
Language Selection Language Settings Using this menu you can adjust the preferred language settings. • Select Language from Setup menu and press OK to view this menu. Press the RETURN button on the remote control to exit. Preferred These settings will be used if available. Otherwise the current settings will be used. Audio: by pressing Left or Right keys change the audio language. Subtitle: alter the subtitle language with Left or Right keys. The chosen language will be seen in subtitles.
Digital Settings - Parental Control, Menu Lock, Set PIN You can view or set parental preferences of your TV. Viewing Parental Control Menu Child Lock Press MENU button and select the Settings by using Left or Right button. Press OK button to view Settings menu. Use Up or Down button to highlight Parental and press OK to continue: Press MENU button and select settings by using Left or Right button. Press OK to continue. Use Up or Down to select parental and then press OK to continue.
Configuring Picture Settings You can configure picture settings of your TV by using Picture Settings menu. Configuring Picture Settings Brightness You can use different picture settings in detail. You can customize current picture mode settings as desired. For example you change items such as, Brightness, Contrast, Colour, Sharpness and Hue. Press MENU button and select picture by using Left or Right button. Press Up or Down to select brightness. Sets the brightness value for the screen.
Configuring Picture Settings - continued Advanced Settings Some additional controls in the picture menu are grouped under the title Advanced Settings. To view or change, first press Up or Down button to select Advance Settings. Press OK button to view. Advanced Settings menu controls are as the following: • Colour Temp: Colour Temperature increases the ‘warmth’ or ‘coolness’ of the picture by increasing the red or blue tint. Press MENU button and select Picture by using Left or Right button.
Changing Picture Format Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats. Press SCREEN button repeatedly to select between Auto, 16:9, Subtitle, 14:9, 14:9 Zoom, 4:3, Panoramic or Cinema. When auto is selected the format being displayed is determined by the picture being broadcast. “Note: Using the special functions to change the size of the displayed image (i.e.
Configuring PC Picture Settings You can set PC Mode picture settings when using the TV as a PC monitor. PC Picture Settings (*) H Position (*) While in VGA/PC mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added to the Picture Settings while in VGA/ PC mode. H (Horizontal) Position shifts the image horizontally to right hand side or left hand side of the screen. PC Picture controls • Press the Left or Right button to adjust the value.
Configuring Sound Settings You can configure sound settings of your TV by using Sound Settings menu. Configuring Sound Settings Sound settings can be configured according to your personal preferences. Press MENU button and select the Sound icon by using Left or Right button. Press OK button to view Sound Settings menu. In equalizer menu, the preset can be changed to Music, Movie, Speech, Flat, Classic and User. Press the MENU button to return to the previous menu.
Settings Menu Operation, Conditional Access Configuring Your TV’s Settings Timers Detailed settings can be configured to suit your personal preferences. Sets timers for selected programmes. Press MENU button and select Settings by using Left or Right button. Press OK button to continue. Use Up or Down button to select Timers and then press OK button to continue. Viewing Settings Menu Press MENU button and select Settings icon by using Left or Right button. Press OK button to view Settings menu.
Setting Timers, Setting Date/Time • The CAM should be correctly inserted, it is impossible to insert fully if reversed. The CAM or the TV terminal may be damaged if the CAM is forcefully inserted. Connect the TV to the mains supply, switch on and then wait for few moments until the card is activated. • When no module is inserted, “No Common Interface module detected” message appears on the screen. • Refer to the module instruction manual for details of the settings.
Source Settings, Other Controls Configuring Source Settings Configuring Other Settings - General You can enables or disable selected source options. The TV will not switch to the disabled source options when SOURCE button is pressed. You can configure the settings of your TV. Select Configuration from Setup menu and press OK to view this menu. Press the RETURN button on the remote control to exit. To view general configuration preferences, select Other Settings in the Settings menu and press OK button.
Other Controls Application Version Displays the current application version. Blue Background Press MENU button and select settings by using Left or Right button. Press OK to continue. Use Up or Down to select others settings and then press OK. Select Blue Background using Up or Down buttons and use Left or Right to set. If the signal is weak or absent, the TV will automatically change to a blue screen. To enable this, set Blue Background to On. Software Upgrade This feature helps to keep your TV updated.
USB Media Browser This TV allows you to enjoy photo, video or music files stored on a USB device. Manual Start Playing MP3 Files • To display Media Browser window, you can press MENU button on the remote control and then select Media Browser by pressing Left or Right button. To play mp3 files from a USB disk, you can use this menu screen. • Press OK button to continue. Media Browser menu contents (depending on the contents of your USB drive) will be displayed.
USB Media Browser - continued This TV allows you to enjoy photo, video or music files stored on a USB device. Viewing JPG Files Video Playback To view photo files from a USB Memory, you can use this menu screen. When you select Photos from Media Browser, available image files will be filtered and listed on this screen. When you select Videos from Media Browser, available video files will be filtered and listed on this screen.
USB Media Browser - continued This TV allows you to enjoy photo, video or music files stored on a USB device. Note: You can set subtitles by using OK button before starting the playback or by using LANG button during the playback. Selected subtitles may not be displayed correctly in some cases. In order to display movie subtitles correctly, you should set a “Movie Subtitle” language. See the section, “Movie Subtitle” in “Language Settings” for selecting Movie Subtitle language.
Analogue Text Services This television has a multi-page text memory, which takes a few moments to load. Analogue Text Services Revealing Concealed Text Before using the text services, the required language region must be chosen. To discover the solutions on quiz and joke pages press the INFO button. • Select Language from the SETTINGS menu. Holding a Page • Press the Left or Right button to choose the required language region. • After the teletext language is selected, press MENU button to exit.
Appendix A: PC Input Typical Display Modes The following table is an illustration of some of the typical video display modes. Some, due to the display native resolution, are scaled automatically to enable correct image to be displayed. Your TV may not support different resolutions. Supported resolution modes are listed below. If you switch your PC to an unsupported mode, a warning OSD will appear on the screen.
Appendix B: AV and HDMI Signal Compatibility (Input Signal Types) Source Supported Signals PAL 50/60 EXT NTSC 60 (SCART) RGB 50 RGB 60 Side AV PAL 50/60 NTSC 60 480i YPbPr HDMI1 HDMI2 60Hz 480p 60Hz 576i 50Hz 576p 50Hz 720p 50Hz 720p 60Hz 1080i 50Hz 1080i 60Hz 1080p 50Hz 1080p 60Hz 480i 60Hz 480p 60Hz 576i 50Hz 576p 50Hz 720p 50Hz 720p 60Hz 1080i 50Hz 1080i 60Hz 1080p 24Hz 1080p 25Hz 1080p 30Hz 1080p 50Hz 1080p 60Hz Note: In some cases a signal on the
Appendix C: Supported File Formats for USB Mode Media Format File Extension .mpg, .mpeg Video MPEG1, 2 .dat MPEG1, 2 .vob MPEG2 Movie Music PCM/MP3 .avi Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid 1.03, Xvid 1.10-beta1/2 PCM .mp3 - MPEG 1 Layer 1 / 2 (MP3) MAX 1920x1080 @ 30p 20Mbit/sec Baseline JPEG .bmp .sub Subtitle MAX 1920x1080 @ 30p 20Mbit/sec MPEG2 MPEG2 .jpg .jpeg Photo Remarks (Maximum resolution/Bit rate etc.
Specifications and Accessories Broadcast Systems/Channels DVB-T, MPEG2 Video Input PAL, SECAM, NTSC 4.43 Stereo Nicam External Connections 1-SCART 1 Input 21-pin SCART 2-SCART-S (via SCART 1) Input 21-pin SCART 3-YPbPr (via VGA) Input Mini D-Sub 15-Pin Analogue 4-SIDE AV Input Side AV Cable input 5-HDMI Input Type A 6-PC Input Mini D-Sub 15-Pin Analogue 7-Digital Audio Output S/PDIF 8-YPbPr Input YPbPr Connection Jack USB Port Media Browser Interface Version: USB 2.
License Information • HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. • DVB is a registered trademark of the DVB Project. • [1] EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection, which is being standardized for reception of high-definition video signals.
Questions and Answers Questions Q A Q A Q A Q A Q A Q Q A Why is there no sound or picture? Check the TV is not in standby mode. Check the mains plug and all mains connections. Why is there a picture but no sound? Check the volume has not been turned down or that sound mute has not been selected. What can cause a poor picture? Interference or a weak signal. Try a different TV station.
Questions and Answers Below are the answers to some of the most common queries. For more information go to www.toshiba.co.uk Q A Q A Q A Why doesn't the Media Browser feature operate? Make sure that USB is connected correctly. Incorrect behaviour may occur with a USB Hub connection. Why is the digital channel locked? Parental control is activated. Check parental settings. Why are some encrypted digital channels unavailable? Your subscription needs upgrading. Contact your service provider.
Toshiba One (1) Year Limited Warranty For TV’s (the “Products”) 1. THE TERMS OF THIS WARRANTY DO NOT AFFECT YOUR STATUTORY RIGHTS. 2. Your Product is warranted to be free from defects in material and workmanship arising under normal use and service, for one (1) year from the date of original purchase when brand new (“Warranty Period”). 3.
If you wish to view the advanced functions but do not have access to a computer or the internet then please contact your nearest owner's manual Helpline number from the numbers shown below.
