32BV500B OWNER’S MANUAL
Contents Safety Precautions ...................................... 3 Air Circulation ......................................... 3 Heat Damage.......................................... 3 Mains Supply .......................................... 3 Warning ................................................ 3 Do ......................................................... 3 Do not.................................................... 3 Installation and Important Information ........ 4 EXCLUSION CLAUSE ...................
Using Text Button.................................. 29 Acessing Sub-Pages............................... 29 Revealing Concealed Text ...................... 29 Holding a Page..................................... 29 Enlarging the Text Display Size ............... 29 Appendix A: PC Input Typical Display Modes30 PIN Information ................................... 30 Appendix B: AV and HDMI Signal Compatibility (Input Signal Types) ............. 31 Appendix C: Supported File Formats for USB Mode.................
Safety Precautions This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products and some points may not apply to the goods you have just purchased.
Installation and Important Information Where to install P Clip Fixing Strap Fixing Strap Sturdy tie (as short as possible) ''P' Clip position on TV is dependent on model * Button and stand style is dependent on model. Locate the television away from direct sunlight and strong lights. Soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen. Place the TV on a stable, level surface that can support the weight of the TV.
Digital Switchover 8IFO EPFT TXJUDIPWFS IBQQFO $PQFMBOE TXJUDIFT PO 0DUPCFS ,FFQ UIJT JNQPSUBOU JOGPSNBUJPO BCPVU IPX UP SF UVOF ZPVS 57 EVSJOH UIF EJHJUBM 57 TXJUDIPWFS 5IF FYBDU EBUF ZPV TXJUDI EFQFOET PO UIF USBOTNJUUFS ZPV BSF TFSWFE CZ 5P DIFDL XIFO ZPV TXJUDI HP UP %JHJUBM 6,µT QPTUDPEF DIFDLFS PO XXX EJHJUBMVL DP VL IFDL ZPVS *57 OFXT $ TFSWJDF PS MPPL BU 5FMFUFYU QBHF UP TFF XIBU 57 SFHJPO ZPVµSF JO Television in the UK is going digital, bringing us all more choice
The Remote Control Simple at-a-glance reference of your remote control.
Connecting External Equipment Before connecting any external equipment, turn off the On/Off switch and remove the mains plug from the wall socket. COMMON INTERFACE The Common Interface is for a Conditional Access Module (CAM).
Connecting an HDMI® or DVI Device to the HDMI Input The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI source device or uncompressed digital video from a DVI (Digital Visual Interface) source device. This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) programme material in digital form from EIA/CEA-861-D–compliant [1] consumer electronic devices (such as a set-top box or DVD player with HDMI or DVI output).
Connecting a Computer Connecting a USB Disk To Connect a Computer To Connect a USB Disk With either an RGB/PC or an HDMI connection, you can watch your computer’s display on the television and hear the sound from the television’s speakers. • You can connect a USB disk to your TV by using the USB input of the TV. This feature allows you to display/play music, photo or video files stored in a USB stick.
Power Save Mode and Cable Holder Environmental Information • This television is designed to consume less energy to save environment. • You not only help to save the environment but also you can save money by reducing electricity bills thanks to the energy efficiency feature of this TV. To reduce energy consumption, you should take the following steps: • You can use Power Save Mode setting, located in the Feature menu.
Controlling the TV A wide variety of external equipment can be connected via the sockets located on the side of the television. Whilst all the necessary adjustments and controls for the television are made using the remote control, the buttons on the right side of the television may be used for some functions.
Initial Installation - Digital & Analogue Before switching on the television put your decoder and media recorder to Standby if they are connected and ensure the aerial is connected to your television. To set up the television use the buttons on the remote control as detailed on page 4. 1. Connect the mains plug and switch the TV into standby using the side On/Off switch. Press any numbered or standby button on the remote control, then the language selection menu will be displayed.
Auto Tuning continued, Manual Tuning The television can be tuned-in manually using Manual Tuning feature. • Repeat as necessary. Note: Press SOURCE button to switch between TV/ DTV. Analogue Manual Tuning The television can be tuned-in manually. For example: if the television cannot be connected to a media recorder/decoder with a SCART lead or to tune-in a station on another System.
Analogue APS and Programme Sorting Before switching on the television put your decoder and media recorder to Standby if they are connected and ensure the aerial is connected to your television. APS (Automatic Programming System) When the APS feature is selected all channels and settings will be lost, the television will return to factory settings and then re-tune. • Press MENU and using the Left or Right button select Program Table tab.
Stereo and Bilingual Transmissions and Channel List Stereo and Bilingual Transmissions For ATV programmes If stereo or dual language broadcasts are transmitted, the word Stereo or Dual will appear on the screen each time positions are changed, disappearing after a few seconds. If the broadcast is not in stereo, the word Mono will appear. Stereo… Press LANG. to select Stereo or Mono. Bilingual… Bilingual transmissions are rare. If they are transmitted, the word Dual will be displayed.
Renaming a Channel and Viewing Info Banner and Programme Locking EPG Renaming a Channel Viewing Info Banner • Select the channel that you want to rename and select Edit Name option. Press OK button to continue. • Press INFO button the information screen will appear giving details of the channel and programme currently being viewed. • Whenever you change channel, the TV displays the broadcast picture along with an information banner at the bottom of the screen (available only in DTV mode).
Programme Guide, Displaying Subtitles and Language Selection Programme Searching Language Settings From the guide screen, you can use search feature. Using this menu you can adjust the preferred language settings. • Press “0” button on the remote control to view Guide Search menu. Using this feature, you can search the programme guide database in accordance with the genre selected or with name match. • Select Language from Setup menu and press OK to view this menu.
Digital Settings - Parental Control, Menu Lock, Set PIN You can view or set parental preferences of your TV. Viewing Parental Control Menu Menu Lock • While in DTV mode, press MENU to view main menu. Select Setup from the list and press OK button. In menu lock you can set locking for all menus, or the Installation Menu to restrict access to these menus. If the menu lock is disabled, there will be free access to the menu system. • Use Up or Down buttons to go to Menu Lock option.
Digital Settings - Configuration You can configure DTV settings of your TV by using digital Configuration menu. Viewing Configuration Menu Scan Encrypted You can configure the settings of your TV. Select Configuration from Setup menu and press OK to view this menu. Press the BACK button on the remote control to exit. When this setting is on, search process will locate the encrypted channels as well.
Digital Settings Configuration continued General Controls Some of the main controls of your TV are as the following. Audio Description (optional) Viewing Main Menu Audio description refers to an additional narration track for blind and visually impaired viewers of visual media, including television and movies. The description narrator talks through the presentation, describing what is happening on the screen during the natural pauses in the audio (and sometimes during dialogue, if deemed necessary).
General Sound Controls You can set sound preferences of your TV. Controlling Volume and Muting Sound Volume Balance Press V+ or V- to adjust the volume. This setting is used for emphasizing left or right speaker balance. Sound Mute • Press Up or Down button to select Balance. Press “ cancel. ” once to turn the sound off and again to Equalizer Settings You can customize current sound mode settings.
Picture Controls Most of the picture controls and functions are available in both digital and analogue modes. Picture Mode Noise Reduction This television offers the choice of personalising the picture style. Cinema, Dynamic and Natural are preset options and affect settings within the television. Sometimes some words or picture elements to become distorted or pixelated. Using the Noise Reduction feature reduces this effect by smoothing out the edges.
Changing Picture Format Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats. Press the SCREEN button repeatedly to select between Auto, 16:9, 4:3, Subtitle, 14:9, 14:9 Zoom, Panaromic or Cinema. When Auto is selected the format being displayed is determined by the picture being broadcast. 16:9 4:3 SUBTITLE Use this setting when watching a widescreen DVD, widescreen video tape or a 16:9 broadcast (when available).
Other Controls Your television has a list of other controls that function in accordance with your preferences. Child Lock HDMI PC Full Mode (optional) Panel Lock disables the buttons on the television. All buttons on the remote control can still be used. If you want to view PC screen in HDMI mode by using external connection, HDMI PC FULL MODE option should be On to adjust the screen ratio correctly. This item might be inactive in some resolutions.
Timers - Digital and Analogue, Conditional Access Programme Timers - Digital Only • Use Left or Right button to set the desired time. This feature will set the television to go to a specific channel at a certain time. It can be used to view a particular programme, or by setting the mode to daily or weekly, can be used to view a series of programmes. • Press MENU and Up or Down to select Timers item menu and press OK to continue.
USB Media Browser This TV allows you to enjoy photo or music files stored on a USB device. Manual Start Playing MP3 Files • To display Media Browser window, you can press MENU button on the remote control and then select Media Browser by pressing Up or Down button. To play mp3 files from a USB disk, you can use this menu screen. • Press OK button to continue. Media Browser menu contents (depending on the contents of your USB drive) will be displayed.
USB Media Browser, continued Slideshow feature. Slideshow Feature To Close the Media Player You can use this feature to display photos on your TV. • Press MENU button on the remote control. • Press YELLOW button to pause a playing file. • Press GREEN button to continue with the slideshow. • Press Left or Right button to jump to previous or next file of slideshow. • Use Up or Down button to rotate the picture using up/down buttons. • Press BACK to exit.
PC Mode PC Picture Position and PC Picture menus are described below. The other menu items are identical to TV mode menus. Please see the previous sections. Autoposition Phase If you shift the picture horizontally or vertically to an unwanted position, use this item to put the picture into correct place automatically. Depending on the resolution and scan frequency that you input to the TV Set, you may see a hazy or noisy picture on the screen.
Digital and Analogue (if available) Text Services This television has a multi-page text memory, which takes a few moments to load. Digital Text and Interactive Services The digital text and interactive services are the up-to-date way of viewing service information, using computer-style formats, incorporating pictures and interactive views. They offer high quality on-screen images with multicolour photographic still images, advanced text and graphics and are user-friendly.
Appendix A: PC Input Typical Display Modes The display has a maximum resolution of 1600 X 1200. The following table is an illustration of some of the typical video display modes. Your TV may not support different resolutions. Supported resolution modes are listed below. If you switch your PC to an unsupported mode, a warning OSD will appear on the screen. Resolution Frequency Hor Ver Ver (Hz) Hor (KHz) Standard Supported Zoom Modes 1 640 480 60 31.5 VESA 16:9, 4:3 2 640 480 72 37.
Appendix B: AV and HDMI Signal Compatibility (Input Signal Types) Source EXT-1 (SCART) EXT-1 S (S-VIDEO) FAV YPbPr HDMI1 HDMI2 Supported Signals Available PAL 50/60 O NTSC 60 O RGB 50 O RGB 60 O PAL 50/60 O PAL 50/60 O NTSC 60 O 480I 60Hz O 480P 60Hz O 576I 50Hz O 576P 50Hz O 720P 50Hz O 720P 60Hz O 1080I 50Hz O 1080I 60Hz O 1080P 50Hz O 1080P 60Hz O 480I 60Hz O 480P 60Hz O 576I 50Hz O 576P 50Hz O 720P 50Hz O 720P 60Hz O 1080I 50Hz O 10
Appendix C: Supported File Formats for USB Mode Media File Extension Format Video Remarks Audio (Maximum resolution/Bit rate etc.) MPEG 1/2 Music .mp3 - Baseline JPEG Photo Sample Rate: 8K ~ 48KHz, Bit Rate: 64K~320Kbps Layer 1/2/3 (MP3) .jpg Progressive JPEG WxH = 8902x8902 up to 77Mega-pixel Support format: 444/ 440/ 422/ 420/ Grayscale Up to 4 Mega-pixel Support format: 444/ 440/ 422/ 420/ Grayscale English - 32 - 00_MB45M_[GB]_3910UK_IDTV_SILVER8_32740W_(IB_INTERNET)_10068433.
Specifications and Accessories DVB-T Broadcast Systems/Channels Broadcast Systems/Channels UK PAL-I UK21-UK69 UHF 21-58 Video Input Stereo PAL, SECAM, NTSC 4.43 Nicam Visible Screen Size (approx.) 32” Display 16:9 Sound Output (at 10% distortion) Main 6W + 6W Power Consumption (approx.) 32” 150W Standby Power Consumption (approx.) 0.
License Information HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC. DVB is a registered trademark of the DVB Project. [1] EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection, which is being standardized for reception of high-definition video signals.
Questions and Answers Below are the answers to some of the most common queries. For more information, go to www.toshiba.co.uk Q A Q A Q A Why is there no sound or picture? Check the television is not in standby mode. Check the mains plug and all mains connections. Why is there a picture but no sound? Check the volume has not been turned down or that sound mute has not been selected. What can cause a poor picture? Interference or a weak signal. Try a different television station.
Q A Q A Q A Q A Q A Q A Q A Q Why doesn't the remote control work? A Check the batteries aren't dead or inserted incorrectly. Q Why doesn't the remote control work? Check the batteries aren't dead or inserted incorrectly. Why doesn't the Media Browser feature operate? Make sure that USB is connected correctly. Incorrect behavior may occur with a USB Hub connection. Why only certain digital channels be viewed? Favourite mode is set to On.
© TOSHIBA Television Central Europe Sp. z o.o. All rights reserved. Reproduction in whole or part without written permission is strictly prohibited. TOSHIBA Television Central Europe Sp. z o.o. ul. Pokoju 1, Biskupice Podgórne, 55-040 Kobierzyce, Poland Specification is subject to change without notice.
