Operation Manual

English - 10 -
Connections
Connector Type Cables Device
Scart
Connection
(back)
VGA
Connection
(back)
SIDE AV(**)
PC/YPbPr
Audio
Connection
(side)
YPbPr/PC Audio
Cable
Side Audio/Video
Connection Cable
SIDE AV(**)
PC/YPbPr
Audio
Connection
(side)
YPbPr/PC Audio Cable
HDMI
Connection
(back)
SPDIF(**)
SPDIF
(Optical Out)
Connection
(back)
SPDIF(**)
SPDIF
(Coaxial Out)
Connection
(back)
SIDE AV(**)
Side AV
(Audio/Video)
Connection
(side)
Audio/Video
Cable
Side Audio/Video
Connection Cable
SIDE AV(**)
Side AV
(Audio/Video)
Connection
(side)
AV Cable
HEADPHONE
Headphone
Connection
(side)
YPBPR
YPbPr Video
Connection
(back)
PC to YPbPr Connection Cable
USB
Connection
(side)
CI
Connection
(side)
CAM
module
LAN
Ethernet
Connection
(back)
LAN / Ethernet Cable
NOTE: When connecting a device via
the YPbPr or the Side AV input, you must
use a connection adapter cable. See
the illustrations on the left side. You can
use YPbPr to VGA cable to enable YPbPr
signal via VGA input. You cannot use VGA
and YPbPr at the same time. To enable PC/
YPbPr audio, you will need to use the Side
AV input with a YPbPr/PC audio cable
for audio connection, using the Side AV
connection cable’s RED and WHITE inputs
(To enable PC/YPbPr audio, you will need to
use the side audio inputs with a YPbPr/
PC audio cable for audio connection
[Depending on the model]). If an external
device is connected via the SCART socket,
the TV may automatically switch to AV
mode. When receiving DTV channels
(Mpeg4 H.264) or while in Media Browser
mode, output will not be available via the
scart socket. When using the wall mounting
kit (available from third party in the
market, if not supplied), we recommend
that you plug all your cables into the back
of the TV before mounting on the wall.
Insert or remove the CI module only when
the TV is SWITCHED OFF. You should
refer to the module instruction manual for
details of the settings. The/Each USB input
of your TV supports devices up to 500mA.
Connecting devices that have current value
above 500mA may damage your TV. By
connecting an HDMI cable to your TV, you
have to use only a shielded HDMI cable
to guarantee a sufcient immunity against
parasitic frequency radiation.
If you want to connect a device to
the TV, make sure that both the TV
and the device are turned off
before making any connection. After the
connection is done, you can turn on the
units and use them.
(**) Depending on the model