Owner`s manual

31
Using REGZA-LINK
®
(continued)
Note:
• When you turn on a
REGZA-LINK
®
compatible
audio receiver, change its
input source, or adjust the
sound volume, the sound
will be output from the
audio receiver’s speakers
even if TV Speakers has
been selected. Turn the
TV off and on again to
output the sound from the
TV speakers.
Other REGZA-LINK
®
functions
When the Enable REGZA-LINK and each item in the REGZA-LINK Setup menu are set to On,
the following functions will be enabled.
TV Auto Input Switch
If a connected HDMI device starts playing video or audio, the TV will automatically switch to the
appropriate HDMI input.
TV Auto Power On
If a device is turned on, the TV turns on automatically.
Device Auto Standby
If the TV is turned off, the TV will send a message to turn off all of the devices connected to the
TV.
Speaker Preference
From this item, you can set your audio output preference to the TV speakers or the audio
receiver speakers. When this item is set to Audio Receiver, the TV remote can be used to
adjust or mute the volume of the audio receiver. You will not be able to select this item unless a
REGZA-LINK
®
compatible audio receiver is connected.
To set the REGZA-LINK
®
Setup
1
From the Setup menu, press to select
REGZA-LINK Setup and then press ENTER/CH
LIST .
2
Press to select Enable REGZA-LINK and
then press to select On.
Note:
• If you set Enable REGZA-LINK to Off, you will
not be able to select the other items.
3
Press to select the REGZA-LINK Setup item you want to use, and then press
to select On or your desired mode to confirm your choice.
• TV Auto Input Switch: On/Off
• TV Auto Power On: On/Off
• Device Auto Standby: On/Off
• Speaker Preference: TV Speakers/Audio Receiver
/
REGZA-LINK Setup
REGZA-LINK Player
Language Setup
Audio Description
Timer Setting
Media Player
/
/
Enable REGZA-LINK On
TV Auto Input Switch
TV Auto Power On
Device Auto Standby
: Adjust
REGZA-LINK Setup
On
Off
On
s
/
/