Owner`s manual
42
Software upgrade (DTV mode only)
Note:
• Do not disconnect the AC
cord when the software
upgrade is in progress, as
this may cause the
upgrade to fail. At this time
you cannot use any of the
buttons.
• When the TV searches for
a software upgrade signal,
the message “Please
wait...” will appear.
Software Upgrade
Software Upgrade allows you to download the latest software available for the channel.
1
Press MENU SETUP or DIGITAL MENU to display the Main Menu screen.
2
Press to select the Setup menu, and then press ENTER/CH LIST .
3
Press to select Software Upgrade, and
then press ENTER/CH LIST to select Start to
check if the TV has the Over Air Download service.
A progress bar appears to indicate scanning
progress.
4
If software upgrade is available from the Over Air
Download (OAD), a message prompt with option to
upgrade software from OAD appears.
5
Press to select Yes, and then press
ENTER/CH LIST . The software upgrade is
initiated.
If you select No, the update will be cancelled. You
can return to watching your TV programmes.
6
Once the process is completed, press
ENTER/CH LIST to reboot the TV.
/
Version
Software Upgrade
Common Interface
Vertical Position
Password Setup
/
Software Upgrade
Please Wait
Progress
Cancel
Software Upgrade
There is new Software! Do you want to
download the new Software?
Yes
No
Software Upgrade
Upgrading... don’t Power Off!
Progress 0%
/
Software Upgrade
Success, TV will reset!
Yes