Manual

connectinga DVDplayerWith€010rstream®(componentVideO),a VCR,
anda satellite receiver
Your TV has two sets of ColorStream °_(component video) inputs.
............... ;,Ifovgg#
DVDplayerwithcomponentvideo
Frorn satellite dish
TVupperhackpanel
HD-1 D_ VlDEO-1
AUDIO
1
\
......._ _ I,_,l,,_,l%'l
StereoVCR
From antenna
Satellitereceiverwithcomponentvideo
TVlower backpanel
You will need:
• coaxial cables
• standard A/V cables
- For better picture performance, if your VCR has S-video,
use an S-video cable (plus the audio cables) instead of
the standard video cable. Do not connect both types of
video cable to VIDEO 1 at the same time or the picture
performance will be unacceptable.
- tfyou have a mono VCR, connect L/MONO on the TV to
your VCR's audio out terminal using the white audio cable
only,
• standard audio cables
• component video cables
- You can connect the component video cables (plus audio
cables) from the DVD player or satellite receiver to either
set of ColorStream terminals on the TV (HD-1 or HD-2),
The ¢olorStream HD-1 and HD-2 terminals can be used
with Progressive (480p, 720p) and Interlaced (480i, 1080i)
scan systems, A 1080i signal wi//previde the best picture
performance (1080p is not supported),
- tfyour DVD player or satellite receiver does net have
component video, connect a standard A/V cable to
VIDEO 2 on the side panel, tf yeur DVD player has HDMt
video, see page 17.
To view antenna or Cable channels:
Select the ANT video input source on the TV.*
To view the DVD player:
Turn ON the DVD player. Select the ColorStream HD-1
video input somce on the TV.*
To view satellite programs using the component video
connections:
Turn on the satellite receiver. Select the ColorStream HD-2
video input source on the TV.*
To view the VCR or view and record antenna
channels:
Turn ON the VCR. Tune the VCR to the channel you want to
watch. Select the VIDEO 1 video input source on the TV.*
To record a TV program while watching a DVD:
Turn ON the VCR. Tune the VCR to the channel to record.
Select the ColorStream HD-1 video input source on the TV*
to view the DVD.
':' To select the video input source, press INPUT on the remote control
(_-_ page 21). To program the TV remote control to operate other
devices, see Chapter 3,
The unauthorized recording, use, distribution, or revision of
television programs, videotapes, DVDs, and other materials is
prohibited under the Copyright Laws of the United States and
other countries, and may subject you to civil and criminal
liability.
15