Manual

Usingthe autoaspectratiofeature

When the auto aspect ratio feature is set to On, the TV will

automatically select the picture size when one of the following

input sources is received:

• A 480i signal from the VIDEO 1, VIDEO 2, ColorStream

HD-1, or ColorStream HD-2 input.

• A 480i, 480p, 720p, 1080i, 1080p, or VGA signal from the

HDMI input.

4:3 normal Natural (with sidebars)

4:3 letter box TheaterWide 2

16:9 lull Full

Not defined

(no [D-I data The current picture size you set under

or HDM[ "Selecting the picture size" on page 39.

aspect data)

Note: The auto aspect ratio feature is not applicable to

antenna or cable input sources.

To turn on the auto aspect ratio feature:

1 Press Mff_Uand open tile Video menu.

2 Highlight Theater Settings and press @.

3 In the Auto Aspect Ratio field, select On.

picturescroli

4 To save tile new settings, highlight Done and press @.

To revert to tile factory defaults, highlight Reset and

press 0.

To turn off the auto aspect ratio feature:

Select Off in step 3 above.

Selectingthe cinemamode

(480iandlO8Oisignals)

When you view a DVD (3:2 pulldown processed) flom a DVD

player connected to the VIDEO 1, VIDEO 2, ColorStream

HD-1, ColorStream HD-2 (component video), or HDMI

inputs on the TV, smoother motion can be obtained by setting

the Cinema Mode to Film.

To set the Cinema Mode to Film:

SS MENU

Press 0 and open tile Video menu.

2 Highlight Theater Settings and press @.

3 In the Cinema Mode field, select Film.

4 To save tile new settings, higMigllt Done and press ,@.

To revert to tile factory defaults, lligMight Reset and

press ,@.

To set the Cinema Mode to Video:

Select Video in step 3 above.