Manual

To block all channels at once:
Highlight Block All in step 5 on previous page and then
highlight Done and press ,_.
To unblock all locked channels at once:
Highlight Allow All in step 5 on previous page and then
highlight Done and press ,_.
iiiiiiica_e_ iiiiii
iiiiiii Done
Unlocking programstemporarily
If you try to tune the TV to a program that exceeds the rating
limits you set, the TV will enter program lock mode and the
following message will appear on-screen:
You can eithertemporarily unlock the program or select an
unlocked program to watch.
To temporarily unlock the program:
1
2
Press M_E
Enter your four-digit PIN code and press .@. ffthe correct
code is entered, the program lock mode is released and the
normal picture appears. All locking is disabled until the
TV is turned off and will be enabled when the TV is
turned on again.
;;;;;;;;;;;;
iiiiiiiiiiii Cancel
Usingthe input lock feature
You can use the Input Lock feature to lock the video inputs
(VIDEO 1, VIDEO 2, ColorStream HD-1, ColorStream
HD-2, HDMI 1, HDMI 2, HDMI 3 andPC) andchannels3and
4. You will not be able to view the input sources or channels
until you unlock the inputs.
To lock/unlock the video inputs:
1
2
3
4
5
SS MENU
Pre._'s O and highlight the Locks menu icon.
Press • to display the PIN code entering screen.
Enter your four-digit PIN code and press @.
Press • to highlight Input Lock and press I_.
Press • or• to select the level of video input locking you
prefer, as described below.
Video: Locks VIDEO 1, VIDEO 2, ColorStream HDI/
HD2, HDMI 1, HDMI 2, HDMI 3, and PC.
Video+: Locks VIDEO 1, VIDEO 2, ColorStream HDI/
HD2, HDM[ 1, HDM[ 2, HDMI 3, PC and channels 3 and
4.
• Select Video+ if you play video tapes via an ANT
input.
Off: Unlocks all video inputs and channels 3 and 4.
6 Press @.
5O