Manual

UsingMPEGnoise reduction

Tile MPEG noise reduction feature allows you to reduce

visible interference caused by MPEG compression, Choices

for MPEG noise reduction are Off, Low, Middle, and High.

Off is automatically selected when this feature is disabled

("grayed out").

To select the MPEG noise reduction level:

1 Press M_Uand open tile Video menu.

2 Highlight Noise Reduction and press @.

3 Press • or • to highlight the MPEG Noise Reduction

field, and then press • or • to select either Off, Low,

Middle or High.

4 To save tile new settings, highlight Done and press @.

To revert to the factory defaults, highlight Reset and

press @.

Usingthe Game Mode feature

You can use the Game Mode feature for shorter fi'alne delays

when playing a video game requiring split-second timing

between the on-screen display and input from the controller

(such as music creation and high-action games).

This feature is more effective for 480i and 1080i input signals.

Note: To use the Game Mode feature, the current video input

must be Video I, Video 2, ColorStream HD1,

ColorStream HD2, HDMI 1, HDMI 2, or HDMI 3. The Game

Mode cannot be turned on when any other video input is

selected.

To turn on Game Mode:

SS MENU

Pre._'s O and open the Video menu.

2 Press • or• to highliglat the Game Mode field, and then

press • or • to select On.

Picture Settings

To turn off Game Mode:

Select Off in step 2 above, change the video input, or turn the

TV off and then on again.

Note: You can change the video input by pressing @ on the

remote control (r_ page 35).