Manual

Settingthe PCAudio
This function allows you to output tile sound flom your PC (if
connected) or mute the sound fiom your PC and output the
sound from your HDMI (DVI) connection. (¢_ page 19)
To set the PC Audio:
1
2
3
Press M_ffUand open tile Audio menu.
Highlight Audio Setup and press @.
Press • or • to select PC Audio and then press • or •
to select No or Yes.
Yes: Outputs the sound fi'oln your PC.
No: Mutes the sound fl:om your PC, and outputs the
sound fi'om the HDMI-I connection.
iiiiiii.oMItA0_io Auto
MTS Stereo
English
Note: Because the PC and HDMt- 1inputs share the same
set of analog audio inputs, the PC Audio menu setting
influences the HDMI I Audio menu setting, tf PC Audio is
set to "No," the HDMI 1Audio setting changes to "Auto."
tf PC Audio is set to "Yes," the HDMI I Audio setting is
set to "Digital" and is grayed out in the menu. (Also see
item 4 on page 11 and "Setting the HDMt TM Audio mode"
on page 32.)
Settingthesleeptimer
You can set tile sleep timer to turn offthe TV after a set length
of time (maximum of 180 minutes).
To set the sleep timer using the remote control:
SS SLfEEP
Pre.;: o on tile remote control to set tile length of time until
SS SLfEEP
the TV turns oft: Repeatedly press o to increase the time in
10-minute increments, or press • or • to increase or decrease
the time in 10-minute increments, to a maximum of 180
minutes.
To set the sleep timer using the on-screen menus:
SS MENU
Press © and open tile Setup menu.
Highlight Sleep Timer and press @.
3 Press tile Number buttons to enter tile length of time in
10-minute increments.
4 Highlight Done and press @.
Note: When a power failure occurs, the sleep timer setting
may be cleared.
To display the remaining sleep time:
SS SLfEEP
Pre.;.i' O •
120 minutes
Note: A message will display on-screen when there is one
minute remaining on the sleep timer.
To cancel the sleep timer:
" SS SLfEEP
Repeatedly pie.. o until it is set to 0 minute.
52