User Guide
Table Of Contents
- Introduction
- Connecting Your TV
- Using the Remote Control
- Menu Layout and Navigation
- Setting up your TV
- Setting up your TV
- Selecting the video input source
- Labeling the video input sources
- Tuning channels using the Channel Browser
- Favorites browser
- Selecting the picture size
- Scrolling the TheaterWideTM picture (TheaterWide 2 and 3 only)
- Using the Auto Aspect feature
- Using the 4:3 Stretch
- Using the FREEZE feature
- Adjusting the picture
- Using closed captions
- Adjusting the audio
- Selecting the PIN code
- Using parental controls (for USA region)
- Using the input lock feature
- Locking channels
- Using the Media Player
- Setting the sleep timer
- No Signal Power Down
- Using HDMI® CEC
- Using the HDMI® settings feature
- Displaying TV status information
- Understanding the last mode memory feature
- Using the TV’s Advanced Features
- Troubleshooting
- Specifications
- Index
- “Marquer les sources d’entrée vidéo” à la page
56
Setting up your TV
Favorites browser
Adding and clearing channels and inputs in the History List
As a channel or input is tuned, the Channel Browser adds it to the
History List and displays it on the right side of the Channel
Browser. Previously tuned channels/inputs are shifted to the left,
eventually moving off the left side. Press the BACK CB arrow
button to surf backward through the previously tuned
channels/inputs. Any channel or input that is tuned repeatedly will
not be repeated in the History List, but instead is moved to the end
of the list on the right side of the Channel Browser.
v All channels that are tuned using the numeric buttons on
the remote control.
v All channels that are tuned using the ◄/►(arrow) buttons
on the remote control.
Whenever an item is selected that cannot be tuned (for various
reasons), the TV will automatically tune to the previously viewed
channel or input.
Clearing channels from the History List:
v Reconguring the ANT/CABLE input will clear the
History List. see “ANT/CABLE IN” on page 43
v Turning off the TV will clear the History List.
Tuning to the next programmed channel
To tune to the next programmed channel, press the ◄/►(arrow)
buttons on the remote control or TV control panel.
This feature will not function until you have programmed channels
into the TV’s channel memory, see “Storing channels in memory
(optional)” on page 44
Tuning to a specific channel (programmed or unprogrammed)
To tune analog channels:
Press the Channel Number (0–9) on the remote control. For
example, to select channel 125, press 1, 2, 5, and then press the
ENTER button.
Tuning digital channels:
Press the Channel Number (0–9) on the remote control, followed by
the (Dash 100) button, and then the sub-channel number. For
example, to select digital channel 125-1, press 1, 2, 5, –, 1, and then
press the ENTER button.