User Guide
Table Of Contents
- Introduction
- Connecting Your TV
- Using the Remote Control
- Menu Layout and Navigation
- Setting up your TV
- Setting up your TV
- Selecting the video input source
- Labeling the video input sources
- Tuning channels using the Channel Browser
- Favorites browser
- Selecting the picture size
- Scrolling the TheaterWideTM picture (TheaterWide 2 and 3 only)
- Using the Auto Aspect feature
- Using the 4:3 Stretch
- Using the FREEZE feature
- Adjusting the picture
- Using closed captions
- Adjusting the audio
- Selecting the PIN code
- Using parental controls (for USA region)
- Using the input lock feature
- Locking channels
- Using the Media Player
- Setting the sleep timer
- No Signal Power Down
- Using HDMI® CEC
- Using the HDMI® settings feature
- Displaying TV status information
- Understanding the last mode memory feature
- Using the TV’s Advanced Features
- Troubleshooting
- Specifications
- Index
- “Marquer les sources d’entrée vidéo” à la page
89
Setting up your TV
Using HDMI® CEC
These functions depend on the devices that are connected.The
HDMI
®
CEC Player Control item will be grayed out in the following
conditions:
v A non-HDMI
®
input is currently selected.
v The Enable HDMI CEC item is set to Off.
v The connected CEC device is not a playback or recording device.
HDMI
®
CEC input source selection
If a HDMI
®
CEC device with HDMI
®
switching capability (e.g.
Audio Receiver) is connected to the HDMI
®
input, you can select
another HDMI
®
CEC device that is connected to the master HDMI
®
device using the TV’s INPUT button, see “Selecting the video input
source” on page 49
VOLUME and MUTE controls of Audio Receiver
With your TV’s remote control, you can adjust or mute the sound
volume of the Audio Receiver.
v VOL (+ –) buttons adjust the volume level.
v MUTE button turns off the sound.
To use this function:
v Set Initial Speaker Setting to Receiver in the HDMI CEC
Control Setup menu.
v Conrm that a connected HDMI
®
CEC device (such as DVD
player, etc.) is selected for the Audio Receiver input source.
v These functions depend on the device connected.
v Initial Speaker Setting will be grayed out if Amplifier
Control is set to Off.
Other HDMI
®
CEC functions
When the Enable HDMI CEC Control and each item in the
HDMI CEC Control Setup menu are set to On, the following
functions will be enabled.
Item: Description:
TV Auto Power If a HDMI
®
CEC device is turned on, the TV turns on automatically.
Auto Standby If the TV is turned off, the TV will send a message to turn off all of the
HDMI
®
CEC devices connected to the TV.