User Manual
36
32L310U20
www.tv.toshiba.com
• Gamma Mid Luminance—Lets you adjust
the levels of black in the picture.
A Highlight this option, then press ENTER.
B Press
or to decrease or increase the
black level detail.
• Dynamic Backlight—Automatically
strengthens the black coloring of dark areas
in the video according to the level of
darkness. You can select High, Low, or Off.
• Dynamic Contrast—Automatically detects
changes in picture quality that affect the
appearance of your contrast settings and
automatically adjusts the video. You can
select High, Middle, Low, or Off.
• MPEG Noise Reduction—Reduces artifact
noise and mosquito noise by MPEG
encoding. You can select Off or On.
• Dynamic Noise Reduction—Reduces
picture noise (snow). You can select Off, Low,
or High.
• Edge Enhancer—Adjusts the picture to
achieve a sharper image. You can select On
or Off.
• Reset—Resets all advanced picture settings
to factory defaults.
• Display Settings—Opens the Display Settings
menu where you can adjust how the picture is
displayed on the screen.
You can adjust:
• Picture Size—See Adjusting the picture size
on page 36.
• Auto Aspect—See Automatically adjusting
the aspect ratio on page 38.
• 4:3 Stretch—See Using the 4:3 Stretch on
page 39.
• Picture Position—See Scrolling the
TheaterWide™ picture on page 38.
3 Press
or to adjust the option or select a
setting, then press ENTER.
4 Press EXIT to close the menu.
Adjusting the picture size
1 Press MENU, press or to highlight Picture,
then press ENTER.
2 Highlight Display Settings, then press ENTER.
3 Highlight Picture Size, then press ENTER.
Note
The Picture Position option may be
grayed and unavailable for some Picture
Size settings.
Notes
• Picture setting adjustments affects the
current video input only. You can
adjust the picture quality separately
for each input.
• Depending on the Sharpness setting,
the Edge Enhancer effect may be
reduced.