Operation Manual

69
CONTROLS AND FEATURES
English
Using REGZA-LINK
This is a new feature that uses CEC technology and
allows you to control Toshiba REGZA-LINK
compatible devices from the television remote
control via HDMI connection (page 11).
When the Enable REGZA-LINK item in the REGZA-LINK
Setup menu is set to On, individual functions also set to On
will be activated.
a Press MENU / C c to highlight Setup icon.
b Press B / C c to highlight Preferences icon and
press OK.
c Press B or b to select REGZA-LINK Setup and press
OK.
d Press b to select Enable REGZA-LINK and press C or
c to select On.
NOTE: If you set Enable REGZA-LINK to Off, all other
items will be grayed out.
The TV Auto Power setting allows the television to be
automatically switched on if a REGZA-LINK device is turned on.
a In the REGZA-LINK Setup menu, press b to highlight
TV Auto Power.
b Press C or c to select On or Off.
When Auto Standby is enabled, the television, when switched
off, will automatically switch off (standby mode) all connected
REGZA-LINK equipment.
a In the REGZA-LINK Setup menu, press b to highlight
Auto Standby.
b Press C or c to select On or Off.
If a REGZA-LINK device with HDMI switching capability (e.g. AV
amplifier) is connected to the HDMI input, you can select another
REGZA-LINK device that is connected to the master HDMI device
on the input source list.
a Press o and a list will appear on screen showing
available input sources.
b Press b to select the desired input source with
REGZA-LINK icon.
c Press c and a second selection screen will appear
showing all connected REGZA-LINK equipment.
d Press B or b to select the desired input source, and
then press OK.
NOTE:
• These functions depend on the device connected.
• If you select the REGZA-LINK input source from the popup
window, some REGZA-LINK devices may automatically turn
on.
• When the television is switched on it will take a few minutes
for the REGZA-LINK icon to appear in the list. When an HDMI
cable is removed, it will take a few minutes for the icon to
disappear.
• If the HDMI cable from connected equipment is changed,
Enable REGZA-LINK in the REGZA-LINK Setup menu may
need to be reset to On.
• If you change the HDMI lead to a connected device or
change an HDMI device setting, reset the Enable REGZA-
LINK item on the REGZA-LINK Setup menu from Off to On.
Enable REGZA-LINK
TV Auto Power
Auto Standby
REGZA-LINK Setup
Enable REGZA-LINK
On
TV Auto Power On
Auto Standby On
REGZA-LINK input source selection
Inputs
TV
1
2
HDMI 2
HDMI 1
PC
HDMI 3
HDMI 4
1 DVD
2 VCR/DVR
3 CBL/SAT
4 GAME/TV
5 AUX