Manual
Adding and erasing channels manually
After you have programmed the channels automatically, you can
manually add or erase specific channels.
To add or erase channels:
1. Select the channel you want to add or erase. If you are adding a
channel, you must select the channel using the Channel Number
buttons.
2. Press MENU, and then press • or I_ until the SET UP menu
appears.
3. Press • or • to highlight ADD/ERASE.
®®0®®@
_SET UP
_NGUAGE ENGLISH
CLOCK SET 00:00
ANT1/2 ANT1
TV/CABLE CABLE
4. Press • or I_ to select ADD or ERASE, depending on the
function you want to perform.
5. Press • to add (or erase) the channel.
6. Repeat steps 1-5 for other channels you want to add or erase.
Adjusting the tilt correction feature
When you install the TV or change the direction of the TV, the
picture may suffer from color shading and/or tilt of the picture
because of the Earth's magnetic field. If so, the following adjustment
should be made for the best possible picture.
To adjust the tilt correction:
1. Press MENU, then press • or I_ until the SET UP menu
appears.
2. Press • or • to highlight TILT CORRECTION.
3. Press • or I_ to correct any tilt of the picture between +10 and
-]0.
MENU
TV front panel
Channel
Number
MENU
Channel AT