Manual

A ÷ [
Connecting two VCRs
This connection ;dlows you to record (dub/edir) f'rom one VCR to
another VCR while watching a videotape. You can also record from
one TV ciaannel while watching another TV channel.
You will need:
* two coaxial cables
* two sets of standard A/V cables
VCR1
From Antenna
TV
VCR2
Connecting a camcorder
This connection allows you to watch video materials recorded on a
caincord er.
YOUwill need:
* one sd- of'standard A/V cables
Note."
/f VCR 1 has S-video, you can use an S-video
table/tTs/ead of standald virleo cable far
better p/ctors peffoffr_ance. Do not c'annect
both a standard video cable and an S-video
r'able to VIDEO 1 (or VIDEO 2] at the same
dme. or the p/ctur_ pefformarTce will be
urTaccep/_bb.
Do not conrTect ff_e same VCR to the ou{out
and inputjacks on #_e TVat the same time.
7b dub or edit, VCR 2 must sebc.t Line/IV,
and #Te TVmust select VIDEO I (see
"Se/ect/rlg l#e arTtenrTainput" on page 2,52.
The unauthorized recording, use,
distribution, or revision of television
programs,videotapes,DVDs,and other
materials is prohibited tinder the
Copyright Laws of the United Statesand
other countries, and maysubject you to
civil and criminal liability.
* The VIDEO OUT jack does not output the
POP picture.
** TheAUDIO OUTjacks can output the
sound of either ff_e Main or POP pit:lure
(see "Selec///W ire Audio OUTsound" on
page 56)
÷
Camcorder
Note."
If yeur camcorder has S-videa, you can use
an S-video cable kTslsad of the s/an&e_/
wUeo cable for bettsr picture performance.
Do not connect both a standard video cable
and an S-video r;ab/e at the same time, or/be
p/c'tur_ perfomTarTce will be unacceptable
12
Video=3 (front panel)