Manual

A ÷ [
60
Bef'ore callhlg a service technician, please check the f'ollowing table f'or a possible cause of the problem and
some solutions.
Problem Solution
TV wi[[ not mrn on * Make sure the power cord is p_ugged in, then press POWER.
• The remote control batteries may be dead. Rephce the batteries.
No picture, no sound * Check the antenna/cable connections.
No sound, picture OK * The sotmd may be muted. Press VOLUME.
• The station may have broadcast dif'ficuhies. _f?y another channel
• Make sure the SPEAKERS f\mction in the AUDIO menu is set proper[>
• Make sure the AUDIO CENTER CHANNEL switch is set proper[>
• If the MTS feature is in SAP mode, change it to STEREO mode.
Poor picture, sound OK * Check the antenna connections.
• The station may have broadcast dif}]cuhies. _f?y another channel
• Adjust the I'ICTURE menu.
• Make sure your other devices are connected to the TV correcd>
D>or reception of broadcast channels * The station may have broadcast dif'ficuhies. _[?y another channel
• Check the antenna connections.
• If you are using a VCR, make sure the TV/VCR button on the remote
control is set correctl>
Ca*mot receive above channel 13 * Make sure the MODE selector on the remote control is set to the mode
that corresponds with the signal source type (cable company or outside
antenna)_
Black box appears on the screen * The closed caption fbature may be set to one of the _fbxt modes IT1, T2,
T3, or T4). _fhrn closed captioning OFE
Unable to select a certain channd * The channd may be locked with the CH LOCK feature, or erased with
the ADD/ERASE feature.
Multiple images * The station may have broadcast difficuhies. _f?y another cham_eL
• Antetma reception may be poor. l.Jse a highly directional outdoor
antenna,
Poor color or no color * The station may have broadcast dif}]cuhies. _f?y another channel
• Adjust the TINT and/or COLOR in the I_ICTIdRE menu.
No stereo or SAP sound f)'om a * Make sure the MTS feature is set proper[>
known MTS broadcast
The f}ont panel buttons do not operate * Check the FRONT PANEL LOCK fbamre.
The remote control does not operate * Make sure the appropriate device mode on the remote control is
selected.
• Remove all obsmlctions between the remote control and the remote
control sensor in the TM
The remote control batteries may be dead. Rephce the batteries.
Cannot access signal input sources
(Video 1, Video2, Video3,
Co[orStream HD !/HD 2, DVI/HDCP)
and/or Channels 3 and 4.
* Check the VIDEO LOCK fbature.
÷