24/40/43/48/49 L18 Series 24/28/32 W18 Series OPERATING INSTRUCTIONS
Overview of the Remote Control............................ 28 Contents Safety Information.................................................... 2 General DVD Operation......................................... 29 Markings on the Product.......................................... 2 Environmental Information....................................... 4 Disposal Information................................................. 4 REACH information..................................................
Safety Information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. In extreme weather (storms, lightning) and long inactivity periods (going on holiday) disconnect the TV set from the mains. The mains plug is used to disconnect TV set from the mains and therefore it must remain readily operable.
WARNING Do not ingest the battery, Chemical Burn Hazard This product or the accessories supplied with the product may contain a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children.
Environmental Information This television is designed to be environment friendly. To reduce energy consumption, you can follow these steps: If you set the Energy Saving to Minimum, Medium, Maximum or Auto the TV will reduce the energy consumption accordingly. If you like to set the Backlight to a fixed value set as Custom and adjust the Backlight (located under the Energy Saving setting) manually using Left or Right buttons on the remote. Set as Off to turn this setting off.
REACH information The European Union (EU) chemical regulation, REACH (Registration, Evaluation, Authorization and Restriction of Chemicals), entered into force on 1 June 2007, with phased deadlines to 2018. Toshiba will meet all REACH requirements and is committed to provide our customers with information about the presence in our articles of substances included on the candidate list according to REACH regulation. Please consult the following website www.toshiba-tv.
Features • Remote controlled colour TV • Fully integrated digital terrestrial/cable/satellite TV (DVB-T-T2/C/S-S2) • Fransat Installation Option • HDMI inputs to connect other devices with HDMI sockets • USB input • OSD menu system • Scart socket for external devices (such as DVD Players, PVR, video games, etc.
To change source: Press the middle of the button in twice(for the second time in total), the source list will appear on the screen. Scroll through the available sources by pushing the button up or down. To turn the TV off: Press the middle of the button in and hold it down for a few seconds, the TV will turn into standby mode. To turn on the TV: Press the middle of the button in, the TV will turn on. Notes: • If you turn the TV off, this cycle starts again beginning with the volume setting.
Max Timeshift: This setting allows you to set the maximum duration for the timeshift recording. Available options are approximate and the actual recording time may change in practice depending on the broadcast. The reserved and free storage space values will change according to this setting. Make sure that you have enough free space otherwise instant recording may not be possible. Auto discard: You can set the Discard type as None, Oldest, Longest or Shortest.
DVB is a registered trademark of the DVB Project. License Notification The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries. Manufactured under license from Dolby Laboratories. Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories. Dolby Audio™ (supporting Dolby Digital Plus™) For DTS patents, see http://patents.dts.com.
Remote Control 1 2 22 3 4 5 6 21 20 7 8 9 19 10 11 18 12 13 14 17 16 15 1. Standby: Switches On / Off the TV 2. Source: Shows available broadcast and content sources 3. Numeric buttons: Switches the channel, enters a number or a letter in the text box on the screen. 4. Language: Switches among sound modes (analogue TV), displays and changes audio/subtitle language and turns subtitles on or off (digital TV, where available) 5. Menu: Displays TV menu 6. Volume +/- 7.
Connections Connector Type Cables Device VGA Connection (back) AUDIO IN(**) AUDIO IN(**) PC/YPbPr Audio Connection (side) PC/YPbPr Audio Connection (side) YPbPr/PC Audio Cable Side Audio/Video Connection Cable YPbPr/PC Audio Cable HDMI Connection (back) Scart Connection (back) YPBPR SIDE AV(**) SIDE AV(**) YPbPr Video Connection (back) Side AV (Audio/Video) Connection (side) Side AV (Audio/Video) Connection (side) SPDIF(**) SPDIF (Optical Out) Connection (back) SPDIF(**) SPDIF (Coaxial Out
Switching On/Off To Switch the TV On Connect the power cord to a power source such as a wall socket (220-240V AC, 50 Hz). To switch on the TV from standby mode either: • Press the Standby button, Programme +/- or a numeric button on the remote control. • Press the middle of the side function switch on the TV in.
To start a Fransat installation set the Install Type as Operator and then set the Satellite Operator as the related Fransat operator. Then press the OK button to start Fransat installation. You can select to start an automatic or manual installation. Press OK to proceed. Fransat Installation will be performed and broadcasts will be stored (if available). If you set the Install Type as Standard, you can continue with regular satellite installation and watch satellite channels.
NTFS disk formatting but recording (Optional) will not be available with NTFS formatted disks. While formatting USB hard drives which have more than 1TB (Tera Byte) storage space you may experience some problems in the formatting process. Wait a little while before each plugging and unplugging as the player may still be reading files. Failure to do so may cause physical damage to the USB player and the USB device itself. Do not pull out your drive while playing a file.
Note: Default PIN could have been set to 0000 or 1234. If you have defined the PIN(is requested depending on the country selection) during the First Time Installation use the PIN that you have defined. status of a function highlight the symbol of the function and press OK as much as needed. If the symbol is marked with a red cross, that means it is deactivated. IMPORTANT: Formatting your USB drive will erase ALL the data on it and it’s file system will be converted to FAT32.
Settings Menu Contents Picture Menu Contents You can change the picture mode to suit your preference or requirements. Picture mode can be set to one of these options: Cinema, Game(optional), Sports, Dynamic and Natural. Mode Contrast Adjusts the light and dark values on the screen. Brightness Adjusts the brightness values on the screen. Sharpness Sets the sharpness value for the objects displayed on the screen. Colour Sets the colour value, adjusting the colours.
Sound Menu Contents Volume Adjusts the volume level. Equalizer Selects the equalizer mode. Custom settings can be made only when in User mode. Balance Adjusts whether the sound comes from the left or right speaker. Headphone Sets headphone volume. Please ensure before using headphones that the headphone volume is set to a low level, to prevent damage to your hearing. Sound Mode You can select a sound mode (If the viewed channel supports).
Select Active Network This setting allows you to select only the broadcasts within the selected network to be listed in the channel list. This feature is available only for the country option of Norway. Signal Information You can use this menu item to monitor signal related information such as signal level/ quality, network name etc for available frequencies. First time installation Deletes all stored channels and settings, resets TV to factory settings. Fransat Options(**) Displays Fransat options.
System Menu Contents Conditional Access Controls conditional access modules when available. Language You may set a different language depending on the broadcaster and the country. Parental Enter correct password to change parental settings. You can easily adjust Menu Lock, Maturity Lock, Child Lock or Guidance in this menu. You can also set a new PIN or change the Default CICAM PIN using the related options. Date/Time Sets date and time.
Child Lock: If this option is set to On, the TV can only be controlled by the remote control. In this case the control buttons on the TV will not work. General TV Operation Using the Channel List The TV sorts all stored stations in the channel list. You can edit this channel list, set favourites or set active stations to be listed by using the Channels menu options. Press the OK button to open the channel list.
programme guide matching the selected genre will be highlighted. Guide Search: Displays searching options. Using these options, you can search the programme guide database in accordance with the selected criteria. Matching results will be listed. Now: Displays current event of the highlighted channel. Zoom: Highlight and press OK to see events in a wider time interval. Now/Next Schedule In this layout option, only the current and next events of the listed channels will be displayed.
No picture • TV is not receiving any signal. Make sure the correct source has been selected. • Is the antenna connected properly? • Is the antenna cable damaged? PC Input Typical Display Modes The following table is an illustration of some of the typical video display modes. Your TV may not support all resolutions. Index Resolution Frequency • Are suitable plugs used to connect the antenna? 1 640x480 60 Hz • If you are in doubt, consult your dealer.
Supported File Formats for USB Mode Media Extension Format Notes Video .mpg, .mpeg MPEG1-2 MPEG1: 768x576 @ 30P, MPEG2:1920x1080 @ 30P .vob MPEG2 .mp4 MPEG4, Xvid, H.264 .mkv H.264, MPEG4,VC-1 .avi MPEG2, MPEG4, Xvid, H.264 .flv H.264/VP6/ Sorenson Audio 1920x1080 @ 30P H.264/VP6: 1920x1080 @ 30P Sorenson: 352x288 @ 30P .mp4, .mov, .3gpp, .3gp, MPEG HEVC/H.265 transport stream, .ts,.trp, .tp, .mkv 1080P@60fps - 50Mbps .3gp MPEG4 , H.264 1920x1080 @ 30P .
Supported DVI Resolutions When connecting devices to your TV’s connectors by using DVI converter cable(DVI to HDMI cable - not supplied), you can refer to the following resolution information.
• Do not use solvents such as benzine, thinner, commercially available cleaners or anti-static spray intended for vinyl LPs. DVD Mode (Depending on the model) Safety Information CAUTION DVD Player is a class 1 laser product. However this product uses a visible laser beam which could cause hazardous radiation exposure. Be sure to operate the player correctly as instructed.
Notes on Playback 1. No sound will be heard during fast forward or rewind. 2. No sound will be heard during slow motion play. 3. Reverse slow motion play may not be available depending on the DVD content. 4. In some cases, the subtitle language is not changed immediately to the selected one. 5. When the preferred language is not selected even after pressing the button several times, it means that the language is not available on the disc. 6.
Disc Types Compatible with This Unit Disc Types (Logos) DVD Recording Disc Types Size Single- Audio + Max. Playing Characteristics Time 12 cm Video sided; 240 min. Doublesided; 480 min. AUDIO-CD Audio MP3-CD Audio (xxxx.mp3) PICTURE-CD Video (still picture) 12 cm 74 min. It depends 12 cm on MP3 quality. It depends 12 cm on JPEG quality. • DVD contains excellent sound and video due to Dolby Digital and MPEG-2 System.
Overview of the Remote Control 1 2 20 3 4 5 6 19 7 8 9 18 10 11 17 12 13 1. Standby 2. Source selection 3. Numeric buttons 4. Audio language selection 5. TV Menu 6. Volume Up / Down 7. Time 8. Navigation buttons 9. OK / Select 10. Back / Previous menu 11. Coloured buttons; Red button - Zoom Green button - Repeat Yellow button - Root Blue button - Title 12. Rewind 13. Pause 16 15 14 14. Play 15. Stop 16. Fast forward 17. Exit 18. DVD menu 19. Subtitle language selection 20.
General DVD Operation You can operate DVD, movie CD, music or picture CD’s content by using the proper buttons on your remote control. Below are main functions of commonly used remote control buttons. Buttons / DVD Playback Movie Playback Picture Playback Music Playback Play Play Play Play Pause Pause Pause Pause Stop Stop Stop Stop Skip backward/ forward Skip backward/ forward Rotate Skip backward/forward / Highlights a menu item / Shifts the zoomed picture up or down (if available).