Owner’s Manual 40/50/58L53** DIGITAL Series This standard owner’s manual is designed to show you how to connect and tune in your Toshiba TV and to operate the most commonly used functions. During the life of your TV firmware updates will be made available to ensure that your TV maintains optimum performance: If your TV is connected to the internet, firmware will be automatically made available. If your TV is not connected to the internet, you can download the latest version of firmware from www.toshiba-om.
English Contents Safety Precautions ............................... 4 Channel Grouping ....................................... 28 Common Interface ...................................... 28 Installation and Important Information ............................................ 5 Digital On-Screen Information and Programme Guide ................................ 29 Where to install ........................................... 5 When using a Wall Bracket .........................
D Format Select ........................................ 54 2D Format Select ........................................ 55 3D Auto Start............................................... 55 2D to 3D Depth ........................................... 55 3D PIN Setup .............................................. 56 3D Start Message ....................................... 56 3D Lock ....................................................... 56 3D Timer Lock .............................................
English Safety Precautions This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products and some points may not apply to the goods you have just purchased. DO NOT REMOVE ANY FIXED COVERS AS THIS WILL EXPOSE DANGEROUS AND ‘LIVE’ PARTS.
Where to install Locate the television away from direct sunlight and Screw 9 mm (supplied) strong lights, soft, indirect lighting is recommended 20 mm for comfortable viewing. Use curtains or blinds to 4 mm prevent direct sunlight falling on the screen. Place the TV set on a stable, level surface that can Place the stand on a stable, level surface and sesupport the weight of the TV.
English When using MHL Mobile High-de¿nition Link Interoperability with MHL devices of other manufacturers is not guaranteed. Toshiba does not provide any guarantee, therefore, against operational failure such as that described below when an MHL source is connected to the TV. - No picture or sound - Some of the functions do not work be remote operation from the TV If the MHL does not work properly, also contact the manufacturer of the source device for advice on its use.
Simple at-a-glance reference of your remote control.
English Connecting External Equipment Before connecting any external equipment, turn off all main power switches. If there is no switch remove the mains plug from the wall socket. *a decoder could USB SOCKET be Digital Satellite or any other compatible decoder. *Model will determine power cord position. HDMI 2 INPUT SOCKET POWER CORD RGB/ PC HDMI 1 INPUT SOCKET SCART 1 (INPUT/TV OUT) For 40L53** *a decoder could USB SOCKET be Digital Satellite or any other compatible decoder.
If you use a decoder and/or media recorder, connect through the decoder and/or media recorder to the television. SCART cables: - - - -- - - - - - - - - - - - - - Connect the video recorder IN/OUT or decoder TV socket to the television. Connect the media player SAT socket to the decoder MEDIA REC. socket. Before running Auto Tuning put your decoder and media recorder to Standby.
English HDMI CEC Connections The basic functions of connected audio/video equipment can be controlled using the television’s remote control if an HDMI CEC compatible device is connected.
The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI source device or uncompressed digital video from a DVI (Digital Visual Interface) source device. This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) programme material in digital form from EIA/CEA-861-D–compliant [1] consumer electronic devices (such as a set-top box or DVD player with HDMI or DVI output). For acceptable video signal formats, see page 17.
English HDMI device HDMI out HDMI cable (not supplied) For 50/58L53** To view the HDMI device video, press the button to select HDMI 1 or HDMI 2 mode.
Connect an HDMI-to-DVI adapter cable (HDMI type A connector) to the HDMI 1. The maximum recommended HDMT – DVI cable length is 6.6ft (2m). An HDMI-to-DVI adapter cable transfers video only. Separate analogue audio connection is not supported for audio receivers.
English HDMI-to-DVI adapter cable (not supplied) DVI device For 50/58L53** To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow these procedures: :KHQ WXUQLQJ RQ \RXU HOHFWURQLF FRPSRQHQWV WXUQ RQ WKH WHOHYLVLRQ ¿UVW DQG WKHQ WKH +'0, RU DVI device. :KHQ WXUQLQJ RII \RXU HOHFWURQLF FRPSRQHQWV WXUQ RII WKH +'0, RU '9, GHYLFH ¿UVW DQG WKHQ WKH television.
English Connecting a Computer With either an RGB/PC or an HDMI connection, you can watch your computer’s display on the television. To connect a PC to the HDMI terminal When connecting a PC to the HDMI terminal on the television, use an HDMI-to-DVI cable. If connecting a PC with an HDMI terminal, use an HDMI cable (type A connector). A separate analogue cable is not necessary.
English the back of your television 2 Computer HDMI-to-DVI adapter cable (not supplied) For 50/58L53** For acceptable PC and video signal formats, see page 17. NOTE: The edges of the images may be hidden. If connecting a certain PC model with a unique PC signal, the PC signal may not be detected correctly.
English Acceptable Video signals through HDMI terminals Resolution H. Frequency .H] V. Frequency H] 480i 15.750 60.000 480p 31.500 60.000 576i 15.625 50.000 576p 31.250 50.000 720p 37.500 50.000 720p 45.000 60.000 1080i 28.125 50.000 1080i 33.750 60.000 1080p 27.000 24.000 1080p 28.125 25.000 1080p 33.750 30.000 1080p 56.250 50.000 1080p 67.500 60.000 Acceptable PC signals through HDMI terminals Resolution H .
English Using the Controls While all the necessary adjustments and controls for the television are made using the remote control, the buttons on the television may be used control some functions.
If the RED Standby LED is unlit, check that the plug is connected to the power supply. If the picture does not appear press on the remote control, it may take a few moments. To put the television into Standby press on the remote control. To view the television press again. The picture may take a few seconds to appear. For energy saving: We recommend that you use the television with factory settings. These settings are designed for energy saving. Unplugging the mains plug will reduce energy use to zero.
English Tuning the Television Before switching on the television put your decoder and media recorder to Standby if they are connected. To set up the television use the buttons on the remote control as detailed on page 7. First Time Using Press to select Tuner Mode. )RU ¿UVW WLPH XVH SOXJ LQ WKH WHOHYLVLRQ and press the button. The Language menu will appear.
English to enter the Auto tuning Press menu. NOTE: Please make sure the aerial is connected to the TV before tuning. Auto tuning Tuning Mode ATV and DTV Start Scan OK Edit RETURN Back 3UHVV Ÿ RU ź WR VHOHFW Tuning Mode DQG WKHQ SUHVV Ż RU Ź WR VHOHFW ATV, DTV or ATV and DTV. 3UHVV Ÿ RU ź WR VHOHFW Start Scan and press . Auto tuning Found Progress ATV 6 % DTV 0 % 0 0 Channel: S54 EXIT Station: to exit ATV scan The search will begin for all available stations.
English Setting the Channels NOTE: When Parental Block is activated, the 4-digit password is needed. 3UHVV Ÿ RU ź WR VHOHFW Start Scan and to start Auto Tuning. press Auto Tuning The Auto tuning function will completely retune the television and can be used to update the channel list. Auto tuning NOTE: It is recommended that Auto tuning is run periodically to ensure that all new services are added.
Manual Tuning There are two TV modes: ATV and DTV that can be tuned-in manually using Manual Tuning. Auto tuning ATV mode - Antenna/Cable Previous settings will be lost ! Press EXIT for no change. Tuning Mode Start Scan Operator Selection Scan Type Start Frequency (MHz) End Frequency Modulation Symbol Rate Network ID System English 3UHVV Ÿ RU ź WR VHOHFW Tuning Mode DQG SUHVV Ż RU Ź WR VHOHFW ATV, DTV or ATV and DTV. Press MENU 3UHVV Ż RU Ź WR VHOHFW SETUP and press to enter the submenu.
English DTV mode - Antenna Press to display the breakdown PHQX 3UHVV Ż RU Ź WR VHOHFW DQ LWHP WKHQ SUHVV Ÿ RU ź WR VHOHFW WKH LWHP DV shown below. Press MENU 3UHVV Ż RU Ź WR VHOHFW to enter the SETUP and press submenu. 3UHVV Ÿ RU ź WR VHOHFW DTV Manual Tuning and press to enter the submenu. ATV Manual Tuning Position 1 DK A C 69 0 − − − − − SETUP Select A B Change C OK Save D E F G RETURN H Back I A Position: The number to be pressed on the remote control.
Automatic Power Down Press MENU 3UHVV Ż RU Ź WR VHOHFW to enter the subSETUP and press menu. The TV will automatically turn itself off (standby) within 4 hours, if you do not touch the control buttons on the remote control or on the TV control panel. It will also automatically turn off if no input signal is detected after approximately 15 minutes. 3UHVV Ÿ RU ź WR VHOHFW DTV Manual Tuning and press to enter the submenu. SETUP In the SETUP PHQX SUHVV Ÿ RU ź WR select Automatic Power Down.
English DTV Settings Favorite Channels The channel order may be changed to suit your personal preference. Press the button on the remote. A icon appears. NOTE: This function is only available in DTV mode. Channels Position 803 804 805 806 807 273 Press MENU 3UHVV Ż RU Ź WR VHOHFW SETUP and press to enter the submenu. Re−number PICTURE SOUND SETUP APPLICATIONS Favorite Skip Lock OK Sort Press to show the Channel List and SUHVV Ż RU Ź WR Favorite.
English Sort Password 3UHVV Ÿ RU ź WR VHOHFW WKH GHVLUHG channel and then press . A tick icon appears. Channels Position 803 804 805 806 807 273 Change the 4-digit parental control password. The factory default password is “0000”. In the DTV Settings PHQX SUHVV Ÿ RU to ź WR VHOHFW Password, and press enter the submenu.
English Standby Update Control Common Interface In the DTV Settings PHQX SUHVV Ÿ RU ź WR VHOHFW Standby Update Control. The Common Interface Slot, situated on the side of the television, enables the insertion of a CAM (Conditional Access Module) and card. These are purchased from a service provider and allow additional subscription broadcasts to be viewed. For information, see a service provider. 3UHVV Ż RU Ź WR VHOHFW Enable or Disable.
When viewing in digital mode, the on-screen information and programme guide provide access to programme details for all available channels. Information Press , and the information screen will appear giving details of the channel and programme currently being viewed.
English General Controls The General Functions allow you to select channels and information, adjust sound features, personalise the picture style and select any connected external equipment. Selecting Channels Subtitles To select a channel use the numbered buttons on the remote control. Channels can also be selected using P and P . If Subtitles are available for your current programme, pressing the SUBTITLE button will toggle Subtitles on or off.
Volume Controls and Mute Sound Volume Press or Stable Sound The Stable Sound feature limits high volume levels in order to prevent the extreme changes in volume that can occur when channels are changed or a programme switches to a commercial. to adjust the volume. Sound Mute on the remote once to turn the sound Press off and again to cancel. Press MENU 3UHVV Ż RU Ź WR VHOHFW SOUND and press to enter the submenu. 3UHVV Ÿ RU ź WR VHOHFW Stable Sound, DQG SUHVV Ż RU Ź WR VHOHFW On or Off.
English Bass Boost Digital Audio Output Bass Boost enhances depth of the sound. Press MENU 3UHVV Ż RU Ź WR VHOHFW to enter the SOUND and press submenu. Press MENU 3UHVV Ż RU Ź WR VHOHFW to enter the SOUND and press submenu. 3UHVV Ÿ RU ź WR VHOHFW Digital Audio Output and press to enter the submenu. 3UHVV Ÿ RU ź WR VHOHFW Advanced Sound Settings and press to enter the submenu. 3UHVV Ÿ RU ź WR VHOHFW Audio Format, DQG SUHVV Ż RU Ź WR VHOHFW PCM or Auto.
English Audio Description Audio Description is an additional narration describing on-screen action, body language, expressions and movements for people with visual disabilities while watching the TV. This function enables you to choose the type of narrations. Press MENU 3UHVV Ż RU Ź WR VHOHFW SOUND and press to enter the submenu. 3UHVV Ÿ RU ź WR VHOHFW Audio Description and press to enter the submenu. 3UHVV Ÿ RU ź WR VHOHFW Audio Description DQG SUHVV Ż RU Ź WR VHOHFW On or Off.
English Widescreen Viewing Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats. Wide (Expect PC) Wide (PC only) 4:3 Super Live Use this setting when watching a widescreen DVD, widescreen video tape or a 16:9 broadcast (when available). Due to the range of widescreen formats (16:9, 14:9, 20:9 etc.) black bars may be visible on the top and bottom of the screen.
English This setting will show the picture without over scan, i.e. WYSIWYG. This option is only available when watching a PC signal source via HDMI or PC terminal. Normal “Dot by Dot” is a non-scaling display. Depending on the input signal format, the setting will display the picture with side panels and/or bars at the top and bottom (i.e. VGA input source).
English Picture Controls Most of the picture controls and functions are available in both digital and analogue modes. NOTE: Features not available will be greyed out. Picture Position Picture Mode The Picture Position may now be adjusted to suit personal preference. You can adjust the picture appearance by selecting the preset value in picture mode based on the programme category. Press MENU 3UHVV Ż RU Ź WR VHOHFW SETUP and press to enter the submenu.
The static gamma feature allows you to adjust the levels of black in the picture. This function increases the strength of dark areas of the picture, which improves picture GH¿QLWLRQ In the Picture Settings PHQX SUHVV Ÿ RU ź WR VHOHFW Static Gamma. In the Picture Settings PHQX SUHVV Ÿ RU ź WR VHOHFW Black/White Level. 3UHVV Ż RU Ź WR VHOHFW WKH QXPEHU RI Static Gamma (-5~+5). 3UHVV Ż RU Ź WR DGMXVW WKH OHYHO IURP Off, Low, Middle or High.
English 3D Colour Management Digital Noise Reduction When 3D Colour Management is set to On, it allows the Base Colour Adjustment feature to become available. You can adjust the picture colour quality by selecting from 6 base colour adjustments : Red, Green, Blue, Yellow, Magenta or Cyan. DNR Digital Noise Reduction enables you to “soften” the screen representation of a weak signal to reduce the noise effect. In the PICTURE PHQX SUHVV Ÿ RU ź WR select DNR.
English Enjoy Photos through USB Port 7KH 3KRWR 9LHZHU DOORZV \RX WR SOD\EDFN LPDJH ¿OHV IURP D 86% VWRUDJH GHYLFH Image Photo Resolution Base-line 15360x8704 (1920x8 x 1088x8) JPEG Progressive 1024x768 non-interface 9600x6400 interface 1200x800 PNG BMP 9600x6400 3UHVV Ÿ ź Ż RU Ź WR VHOHFW WKH IROGHU you wish to view and press to enter. Press P or P to page up or down. View Photo Files Insert a USB storage device and press on the remote. 8VH Ÿ RU ź WR VHOHFW MEDIA and press .
English Press MENU to change the settings when viewing a photo. Set Interval Time Press MENU to change the settings when viewing a photo. 3UHVV Ż RU Ź WR VHOHFW and press to select the desired interval time (3/5/10/15/30/60/90 Sec). Off On Using the Play List 15 sec 788 X 1157 00001 / 00004 0000-1.jpg ---- /-- /-- -- :-- Press MENU to change the settings when viewing a photo.
and press English 3UHVV Ż RU Ź WR VHOHFW Photo Info . Info GLVSOD\V WKH ¿OH VWDWXV LQIRUPDWLRQ FRQtent number, photo title, shooting date and time, resolution etc.). Press MENU to change the settings when viewing a photo. 3UHVV Ż RU Ź WR VHOHFW and press . Background Music 16 Play List Move OK Select RETURN Back 3UHVV Ÿ RU ź WR VHOHFW PXVLF DQG SUHVV to play music. Press RETURN on the remote to collapse the list. 0000-1.
English Enjoy Music through USB Port 7KH 03 3OD\HU DOORZV \RX WR SOD\EDFN PXVLF ¿OHV IURP D 86% VWRUDJH GHYLFH Audio Codec File Extension Bit Rate MPEG1 Layer2/3 MP3 Bit Rate: 8Kbps ~ 320Kbps Sampling rate: 16KHz ~ 48KHz AAC, HEAAC M4A/AAC Bit Rate: Free Format Sampling rate: 8KHz ~ 48KHz LPCM WAV Bit Rate : 64Kbps ~ 1.5Mbps Sampling rate : 8KHz ~ 48KHz 3UHVV Ÿ RU ź WR VHOHFW WKH IROGHU \RX wish to play and press to enter. Press P or P to page up or down.
English 3UHVV Ÿ RU ź WR VHOHFW WKH GHVLUHG to play. music and press Repeat Settings 3UHVV Ż RU Ź WR VHOHFW . Play to select Off, One or Folder.
English Enjoy Videos through USB Port 7KH 9LGHR 9LHZHU DOORZV \RX WR SOD\EDFN YLGHR ¿OHV IURP D 86% VWRUDJH GHYLFH NOTE: USB 2.0 or above is recommended for best media performance. File Container Video Codec Extension dat, mpg, mpeg ts, trp, tp vob mp4, m4v mkv MPEG MPEG1 MPEG2 MPEG2-TS H.264 H.264-TS SPEC 1080P@ 30fps H.264: 1080P@50fps MPEG2 Others: 1080P@30fps MPEG2-PS MPEG2 1080P@ 30fps MP4 MKV H.264 H.264: 1080P@50fps MPEG4 Others: 1080P@30fps H.264 H.
English Press MENU to change the settings when viewing a video. Play Video Files Insert a USB storage device and press on the remote. 8VH Ÿ RU ź WR VHOHFW MEDIA and press . Play Inputs TV Standard Sta Native ti 1 2 3C HDMI1 HDMI2 MEDIA PC Folder 00:00:08 / 00:02:28 Move OK Select RETURN Back 3UHVV Ż RU Ź WR USB 2.
English Repeat Settings Step Forward Press MENU to change the settings when viewing a video. The feature allows you to view a video one frame at a time. Press MENU to change the settings when viewing a video. 3UHVV Ż RU Ź WR VHOHFW and press to select Off, One or Folder. 3UHVV Ż RU Ź WR VHOHFW to play step by step. Set Press MENU to change the settings when viewing a video. Video Info Info GLVSOD\ ¿OH VWDWXV LQIRUPDWLRQ FRQWHQW number, video title, audio track, subtitle, program, size, etc.).
English Goto Time The feature allows you to view a selected time during the video. Press MENU to change the settings when viewing a video. 3UHVV Ż RU Ź WR VHOHFW and press . Use the number key pad on the remote to enter time. Press to go to the input time. Standard Play Input search time: 0 0 : 0 0 : 0 0 Standard OK Native Folder 00:00:16 / 00:02:28 16 00001 / 0003 001.
English HDMI CEC Control This feature uses CEC (Consumer Electronics Control) technology, and allows the control of Toshiba HDMI CEC compatible equipment from the television’s remote control. NOTE: Not all Toshiba products currently support HDMI CEC. Equipment Control Select HDMI CEC Device The HDMI CEC mode on the television’s remote control allows the control of connected HDMI CEC equipment being watched.
English HDMI CEC Menus By activating the Enable HDMI-LINK feature in the HDMI CEC Control menu, individual HDMI-LINK features can then be activated. Enable HDMI-LINK One Touch Play When the Enable HDMI-LINK is set to On, it allows the other functions to be enabled.
English Auto Power On The Auto Power On setting allows the television to be automatically switched On if user pressed Play key on the HDMI CEC device. 1 In the HDMI CEC Control menu, press Ÿ RU ź WR VHOHFW Auto Power On. 2 3UHVV Ż RU Ź WR VHOHFW On or Off. Auto Standby When the Auto Standby is enabled, switching off the television will automatically switch off all connected HDMI CEC equipment. In the HDMI CEC Control menu, press Ÿ RU ź WR VHOHFW Auto Standby. 3UHVV Ż RU Ź WR VHOHFW On or Off.
English HDMI CEC Playback Device Control This is a new feature that uses CEC technology and allows you to control HDMI CEC compatible devices from the TV remote control via HDMI connection. When there are two or more HDMI CEC devices connected to the television, the device selection to select. menu appears.
English Using MHL TV Function MHL Control You can use the following functions by connecting between the TV HDMI 2 port and micro USB port of mobile phones etc. with a MHL cable.
MHL is a new mobile audio video interface standard for direct connection with MHL enabled mobile devices to MHL enabled TVs, providing instant access to a wealth of mobile content with ease of control through the TV remote controller. Remote Control Pass-Through Control Panel 1 2 1 3 No Item EXIT Exit. Ÿ Up. ź Down. Ż Left. Ź Right. Select. RETURN Exit. Entry MHL Control (Pass-Through Control Panel) 1 GUIDE Record. 2 EXIT Close the Pass-Through Control Panel.
English Using 3D Functions Display Mode Select Before using 3D programming, see and follow “Caution and Other Information for 3D” on page 58. Viewing 3D programming requires the following: Toshiba FPT-AG03 (L53*5 : 2pcs supplied, L53*3/L53*1 : Not supplied) Compatible 3D playback device or 3D source 3D capable high quality HDMI cable There are three modes for watching TV. 3D*: Displays 3D images. 2D: Changes 3D images to 2D. 2D to 3D*: Changes 2D images to 3D.
1 3 3UHVV Ż RU Ź WR VHOHFW Off, 3D or 2D. Press QUICK 3UHVV Ÿ RU ź WR VHOHFW 3D Settings and press . 2 3UHVV Ÿ RU ź WR VHOHFW 2D Format Select and press . 3 3UHVV Ż RU Ź WR VHOHFW Native, Side by Side or Top and Bottom. 3D Setup 2D to 3D Depth 3D Auto Start 3D PIN Setup 3D Safety Settings 3D Important Info Edit Please select your desired setting. Side by Side Top and Bottom Select OK Enter NOTE: 2D Format Select is only available when Display Mode Select is 2D.
English 3D PIN Setup 3D Lock A 3D PIN code is necessary for using 3D Safety Settings. When 3D Lock is set to On, you must enter 3D PIN code for changing display mode. 1 In the 3D Setup PHQX SUHVV Ÿ RU ź WR select 3D PIN Setup. 1 In the 3D Setup PHQX SUHVV Ÿ RU ź WR select 3D Safety Settings and press . 2 Enter a new 4-digit password, and re-enter the new password again to FRQ¿UP 2 Enter your 4-digit 3D PIN code. 3 3UHVV Ÿ RU ź WR VHOHFW 3D Lock and SUHVV Ż RU Ź WR VHOHFW On or Off.
English 3D Important Info In the 3D Setup PHQX SUHVV Ÿ RU ź WR VHOHFW 3D Important Info and press . A message will appear. Left and Right Image The left and right eye shutter timing of the glasses can be swapped. If 3D images look blurred, switch the left and right sides of the 3D image. 1 Press QUICK 3UHVV Ÿ RU ź WR VHOHFW 3D Settings and press . 2 3UHVV Ÿ RU ź WR VHOHFW Left and Right Image DQG SUHVV Ż RU Ź WR DGMXVW WKH settings as required. 3 3UHVV Ż RU Ź WR VHOHFW Normal or Swapped.
English Caution and Other Information for 3D Important information for 3D viewing Available 3D glasses: Toshiba FPT-AG03 CAUTION This product contains a coin/button cell battery. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. The 3D function has been designed for private use and entertainment in your home environment. Please note that any commercial use of the 3D function could lead to copyright infringement of authors’ rights.
If the 3D PIN number has been forgotten: Use the Master PIN code of 1276, and then change to a number of your choice. Select 3D PIN from the Preferences / 3D Setup menu to enter PIN. Notes on handling the 3D glasses’ liquid crystal shutter lenses Do not put excessive force on the lenses. Do not scratch the surface of the lenses with sharp objects. Do not drop or bend the 3D glasses. Notes on IR communication Do not block the IR sensor for 3D glasses on the TV by placing objects in front of it.
English Preference Controls On Timer This feature allows you to set the television to turn on automatically to a preset channel at a certain time of day or after a certain length of time. 1 Press MENU 3UHVV Ż RU Ź WR VHOHFW APPLICATIONS and press to enter the submenu. PICTURE 2 SOUND SETUP APPLICATIONS PREFERENCES 5 3UHVV Ÿ RU ź WR VHOHFW Power On Time DQG SUHVV Ż RU Ź RU XVH WKH QXPEHU key pad on the remote to enter the time.
4 EPG (Electronic Programme Guide) supports 9 sets of timers. You can set or cancel a timer for a selected programme within the guide. When the TV is on and the timer activates, a dialogue box is shown informing you that the programme is about to start. When the TV is in standby mode and the timer activates, the TV will wake up with backlight off, speaker mute on, and change to the channel selected. You must set the time correctly before using this function.
English Panel Lock Blue Screen Panel Lock disables the buttons on the television. All buttons on the remote control can still be used. When Blue Screen is selected, the screen will turn blue when no signal is received. 1 Press MENU 3UHVV Ż RU Ź WR VHOHFW PREFERENCES and press to enter the submenu. PICTURE 2 SOUND SETUP APPLICATIONS 1 In the PREFERENCES PHQX SUHVV Ÿ RU ź WR VHOHFW Blue Screen. 2 3UHVV Ż RU Ź WR VHOHFW On or Off. NOTE: This function is not available in DTV mode.
1 In the PREFERENCES PHQX SUHVV Ÿ RU ź WR VHOHFW DivX Deregistration and press . 2 3UHVV Ż RU Ź WR VHOHFW OK WR FRQ¿UP RU select Cancel to exit and press . System Information In the SETUP PHQX SUHVV Ÿ RU ź WR VHOHFW to display System Information and press WKH PRGHO LQIRUPDWLRQ DQG ¿UPZDUH YHUVLRQ System Information TOSHIBA 2013 Nov 9 2012, 17:48:06, FW: v0.08 (SR) Your device is already registered.
English Text Services and Text Information This television has a multi-page text memory, which takes a few moments to load. Setting the Modes 1 Control Buttons In the PREFERENCES PHQX SUHVV Ÿ RU ź WR VHOHFW Teletext. Below is a guide to the functions of the remote control text buttons. Displays the index/initial page: Press to access the index/initial page. The page displayed is dependant on the broadcaster. Reveals concealed text: To discover the solutions on quiz and joke pages press the button.
Most of the picture controls and functions are available. However features not available will be greyed out. In the PC input mode, the Manual Setting is not displayed. First press XQWLO WKH YLGHR LQSXW PRGH OLVW DSSHDUV RQ WKH VFUHHQ WKHQ SUHVV Ÿ RU ź DQG in order to select the PC input mode. This function may not be available for some signal or if no signal is received.
English Input Signal Selection Use the Input Selection feature if the television does not switch over automatically when using an external device. Input Signal Selection You can select source of AV or S-VIDEO from this function. 1 Press MENU 3UHVV Ż RU Ź WR VHOHFW SETUP and press to enter the submenu. PICTURE SOUND SETUP APPLICATIONS PREFERENCES 2 3UHVV Ÿ RU ź WR VHOHFW AV connection, and press to enter the submenu. 3 3UHVV Ÿ RU ź WR VHOHFW EXT1 input and SUHVV Ż RU Ź WR VHOHFW AV or S-VIDEO.
Q A Q A :h\ is there no sound or picture" Q A Check that the television is on and that all connections are made properly. 7here is a picture, but wh\ is there little or no colour" 1 The colour is factory set to Auto to automatically display the best colour system. When using an external source, if there is little or no colour, improvements may sometimes be achieved. :hat else can cause a poor picture" Interference or a weak signal.
English Q :h\ are the colours wrong when an 176C source is pla\ed" A Connect the NTSC source via a SCART cable and play. Select Manual setting from the SETUP menu and set the Colour System to Auto. Manual setting Colour system: Auto EXT 1 Select Q A Q A Q A Q A A Change OK Save RETURN Back :hat can be done if the user-de¿ned password has been forgotten" Use the universal password 1276, then change to a new number of your choice.
English Speci¿cations and Accessories 7KLV WHOHYLVLRQ FRPSOLHV ZLWK WKH VSHFL¿FDWLRQ OLVWHG EHORZ DVB-T Broadcast systems/ channels UK UHF 21-68 France Germany Austria Switzerland Italian Spain Annual power consump- 40L53** tion2 (approx.
English License Information Manufactured under license from Dolb\ Laboratories Dolb\ and the double-D s\mbol are trademarNs of Dolb\ Laboratories DivX®, DivX Certi¿ed® and associated logos are trademarNs of 5ovi Corporation or its subsidiaries and are used under license Covered b\ one or more of the following 8 6 patents , ,6 , 6 ,668 , 1 , 1 , 1 , HDMI, the HDMI logo and High-De¿nition Multimedia Interface are trademarNs or registered trademarNs of HDMI Licensing LLC in t
E8 Conformit\ 6tatement 7his product is carr\ing the CE-MarN in accordance with the related European Directives 5esponsible for CE-MarNing is 726HI%A 7ELE9I6I21 CE175AL E8523E 6p ] o o , ul 3oNoMu 1, %isNupice 3odgyrne, - .
© TOSHIBA Television Central Europe Sp. z o.o. 2013 All rights reserved. Reproduction in whole or part without written permission is strictly prohibited. TOSHIBA Television Central Europe Sp. z o.o. ul. Pokoju 1, Biskupice Podgórne, 55-040 Kobierzyce, Poland Specification is subject to change without notice.