32AV93*G 32/40LV93*G 26/32EL93*G DIGITAL-Serie
Deutsch Inhaltsverzeichnis Sicherheitshinweise...................5 Einstellen des Fernsehers.........21 Installation und wichtige Informationen..............................6 Erstmalige Verwendung....................... 21 Einstellen der Kanäle.................23 Installationsort...................................... 6 Autom. Sendersuche............................ 23 Bei Verwendung einer Wandhalterung..................................... 6 Manuelle Sendersuche........................
Hintergrundmusik................................. 43 Fotoinformationen................................ 43 Lautstärkeregelung und Stummschaltung.................................. 34 Musik über den USB-Port genießen......................................44 Sprache................................................ 34 Tiefen, Höhen und Balance.................. 34 Musikdateien abspielen........................ 44 Aut. Lautstärkeanpassung................... 34 Wiederholungseinstellungen................
Deutsch Präferenzsteuerung....................54 Ein-Timer.............................................. 54 Abschaltautomatik................................ 54 EPG...................................................... 55 Bedienfeldsperre.................................. 56 Auto Format (Breitbild)......................... 56 4:3 Dehnung......................................... 56 Blauer Bildschirm................................. 56 Seitliches Panel....................................
Das Produkt wurde mit Rücksicht der internationalen Sicherheitsnormen entworfen und hergestellt. Trotzdem müssen Sie wie beim Umgang mit anderen elektrischen Geräten darauf Acht geben, um das Gerät optimal und sicher zu nützen. Lesen Sie bitte die folgenden Sicherheitshinweise. Diese sind allgemeine Sicherheitsrichtlinien für sämtliche elektronische Konsumprodukte und manche gelten möglicherweise nicht für die Produkte, die Sie gekauft haben.
Deutsch Installation und wichtige Informationen Installationsort Robustes Band (so kurz wie möglich) Halten Sie das Fernsehgerät von direkter Sonneneinstrahlung und starker Beleuchtung fern. Es ist ratsam, eine sanfte, Ständerbügel Schraube (nicht enthalten) indirekte Beleuchtung zu verwenden, um die Augen zu schonen. Verwenden Sie Vorhänge oder Jalousien, um eine Fixierriemen Fixierriemen direkte Sonneneinstrahlung auf den Bildschirm zu vermeiden.
Toshiba haftet auf keinen Fall für Verluste und/oder Schäden an dem Produkt, die durch Folgendes entstanden sind: i) Brand, ii) Erdbeben, iii) Unfallschäden, iv) Absichtliche unsachgemäße Verwendung des Produkts, v) Verwendung des Produkts unter unsachgemäßen Bedingungen, vi) Verlust und/oder Schaden am Produkt, welches im Besitz von einem Dritten geschehen ist, Schaden oder Verlust, der durch Nichtbeachtung oder Vernachlässigung der Anweisungen in vii) der Gebrauchsanleitung entstanden ist, Verlust oder Sc
Deutsch Die Fernbedienung Überblick über die Fernbedienung 12 Im TV-Modus: Anzeige von Bildschirminformationen Im Textmodus: Zugriff auf die Indexseite 13 Stummschaltung des Tons 14 Anzeige des Schnellzugangsmenüs 15 Verlassen des Menüsystems 16 EPG-Anzeige 17 Zurück zur vorherigen Menüebene 18 Anzeige des Bildschirmmenüs 19 Menünavigation: ▲, ▼, ◄, ►: Im Textmodus: Umschalten der Seiten Bestätigen der Auswahl 20 Farbtasten: Textsteuertasten Verborgenen Text einblenden Gewünschte Seite halten Vergrößern
Stellen Sie sämtliche Netzschalter in die Aus-Position, bevor Sie ein externes Gerät anschließen. Falls kein Schalter vorhanden ist, den Netzstecker aus der Steckdose ziehen. *Ein Dekoder kann ein digitaler Satellitenempfänger oder anderer kompatibler Dekoder sein. *Stecker Modellabhängig.
Deutsch Antennenkabel: - - - - - - - - - - - - - - - - - - Verbinden Sie die Antenne mit dem Anschluss "ANT" an der Rückseite des Fernsehgerätes. Wenn Sie einen Dekoder und/oder Medienrekorder verwenden, schließen Sie diese(n) am Fernseher an. SCART-Kabel: - - - -- - - - - - - - - - - - - - Verbinden Sie den Anschluss IN/OUT am Videorekorder oder den Anschluss TV am Dekoder mit dem Fernsehgerät. Verbinden Sie den Anschluss SAT am Medienrekorder mit dem Anschluss MEDIA REC am Dekoder. Bevor Sie die Autom.
Die Grundfunktionen des angeschlossenen Audio-/Videogerätes können über die Fernbedienung des Fernsehers kontrolliert werden, wenn ein REGZA-LINK-kompatibles Gerät angeschlossen ist.
Deutsch Verbinden eines HDMI- oder DVI-Gerätes mit dem HDMI-Eingang Der HDMI-Eingang am Fernsehgerät nimmt digitale Audio- und unkomprimierte digitale Videodaten von einem HDMI-Gerät oder unkomprimierte digitale Videodaten von einem DVI (Digital Visual Interface)-Gerät auf. Dieser Eingang ist für den Empfang von HDCP (High-Bandwidth Digital- Content Protection)-Programminhalten in digitaler Form von EIA/CEA-861-D–konformen [1] Unterhaltungselektronikgeräten (wie z.B.
Deutsch HDMI-Kabel (nicht mitgeliefert) HDMI-Gerät HDMI out Beim 26/32EL93*G Sie können das Videosignal des HDMI-Gerätes anzeigen, indem Sie zur Auswahl des HDMI 1- oder HDMI 2-Modus die Taste drücken.
Deutsch So schließen Sie ein DVI-Gerät an Schließen Sie ein HDMI-auf-DVI Adapterkabel (HDMI Typ A Anschluss) an HDMI 1 an. • Wir empfehlen Ihnen ein HDMI-auf-DVI-Adapterkabel mit der Länge von 201,17cm (6,6 Fuß) zu verwenden. • Ein HDMI-auf-DVI-Adapterkabel überträgt nur Videodaten. • Separate analoge Audioverbindungen werden für Audio-Empfänger nicht unterstützt.
Deutsch HDMI-auf-DVI-Adapterkabel (nicht mitgeliefert) DVI-Gerät Beim 26/32EL93*G Wir empfehlen Ihnen die folgenden Schritte zu befolgen, um sicherzustellen, dass das HDMI- oder DVI-Gerät richtig zurückgesetzt wird: • Wenn Sie die Elektronikgeräte einschalten, schalten Sie bitte zuerst das Fernsehgerät und dann das HDMI- bzw. DVI-Gerät ein. • Wenn Sie die Elektronikgeräte ausschalten, schalten Sie bitte zuerst das HDMI- bzw. DVI-Gerät und dann das Fernsehgerät aus.
Deutsch Verbinden mit einem Computer Mit einer RGB/PC oder einer HDMI Verbindung können Sie Ihren Computer-Bildschirm auf dem Fernseher anzeigen. Verbinden eines Computers mit dem HDMI-Anschluss Verwenden Sie ein HDMI-auf-DVI Adapterkabel zum Anschluss eines PC an den HDMI Anschluss des Fernsehers. Verwenden Sie ein HDMI-Kabel (Typ A-Anschuss), wenn der Computer über einen HDMI-Anschluss verfügt. Ein separates analoges Kabel ist nicht erforderlich.
Deutsch Rückwand des Fernsehgerätes 2 Computer HDMI-auf-DVIAdapterkabel (nicht mitgeliefert) Beim 26/32EL93*G Unterstützte PC- und Videosignalformate finden Sie auf Seite 18. HINWEIS: • Die Ränder der Bilder werden möglicherweise versteckt. • Beim Anschluss bestimmter PC-Modelle mit „exotischen“ Signalen kann es vorkommen, dass das PC-Signal nicht richtig erkannt wird.
Deutsch Unterstützte Videosignale über HDMI-Anschlüsse Auflösung H. Frequenz (kHz) V.
Sämtliche Einstellungen und Steuerungen des Fernsehgerätes können über die Fernbedienung vorgenommen werden. Mit den Tasten an dem Fernsehgerät können Sie auch einige Funktionen steuern.
Deutsch Einschalten Falls die Standby-LED nicht ROT leuchtet, prüfen Sie bitte, ob das Netzkabel mit einer Steckdose verbunden ist. Wenn kein Bild erscheint, drücken Sie bitte auf der Fernbedienung. Es kann eine Weile dauern. Drücken Sie auf auf der Fernbedienung, um das Fernsehgerät in den Standbymodus zu stellen. Drücken Sie erneut auf , um fernzusehen. Es kann einige Sekunden dauern, bis das Bild erscheint. Zum Energiesparen: Wir empfehlen die Verwendung des Fernsehers mit den Standardeinstellungen.
Bevor Sie das Fernsehgerät einschalten, stellen Sie bitte gegebenenfalls den Dekoder und Medienrekorder in den Standbymodus. Verwenden Sie die Tasten auf der Fernbedienung wie auf Seite 8 beschrieben, um das Fernsehgerät einzustellen. Drücken Sie ▲ oder ▼ zur Auswahl von Digital Untertitel Sprache und dann ◄ oder ► zur Auswahl der gewünschten Sprache. Drücken Sie ▲ oder ▼ zur Auswahl von Digital Untertitel Sprache 2 und dann ◄ oder ► zur Auswahl der gewünschten Sprache.
Deutsch Drücken Sie auf auszuwählen. Drücken Sie ◄ oder ► zur Auswahl von Abstimmungsmodus und dann ◄ oder ► zur Auswahl von ATV, DTV oder ATV und DTV. Drücken Sie ◄ oder ► zur Auswahl von Scan starten und drücken Sie . , um den Standort Standort "Um den Fernseher im Ausstellungsraum eines Geschäftes zu" verwenden, wählen Sie bitte [Geschäft]. Der Modus [Zu Hause] ist für den normalen Gebrauch geeignet. Geschäft ATV DTV Auswählen OK Autom.
Deutsch Einstellen der Kanäle HINWEIS: Bei aktivierter Kindersicherung ist das 4-stellige Kennwort erforderlich. Wählen Sie mit ▲ oder ▼ die Option Suchlauf starten und drücken zum Start der Autom. Sendersuche . Autom. Sendersuche Die Funktion Autom. Sendersuche führt einen kompletten Kanalsuchlauf am Fernsehgerät durch und aktualisiert die Kanalliste. HINWEIS: Es empfiehlt sich, die Autom. Sendersuche regelmäßig durchzuführen, damit alle neuen Dienste hinzugefügt werden. ATV DTV Autom.
Deutsch Wählen Sie mit ▲ oder ▼ die Option Senderwahl-Modus; wählen Sie mit ◄ oder ► zwischen ATV, DTV und ATV und DTV. Manuelle Sendersuche Es gibt zwei TV-Modi: ATV und DTV, diese können manuell mit Hilfe von Manuelle Sendersuche eingestellt werden. ATV-Modus - Antenne/Kabel Drücken Sie MENU. Wählen Sie mit ◄ oder ► die Option EINSTELLUNGEN und drücken zum Aufrufen des Submenüs . Wählen Sie mit ▲ oder ▼ die Option ATV Manuelle Sendersuche und drücken zum Aufrufen des Submenüs . Autom.
ATV Manuelle Sendersuche Feineinstellung 1 BG P Auswählen A B C 69 0 - - - - - Ändern OK Speichern RETURN Zurück C D E F G H I A Position: Geben Sie hier mit der Fernbedienung die Programmnummer ein. B System: Hier geben Sie die Sendungsgebiete an. Farbsystem: Die Werkseinstellung ist „Auto“. Diese Einstellung sollte nur dann geändert werden, wenn Probleme wie z.B. bei einer NTSC-Eingabe von einer externen Quelle auftreten.
Deutsch Automatische Abschaltung DTV-Modus - Kabel Drücken Sie MENU. Wählen Sie mit ◄ oder ► die Option EINSTELLUNGEN und drücken zum Aufrufen des Submenüs . Wählen Sie mit ▲ oder ▼ die Option DTV Manuelle Sendersuche und drücken zum Aufrufen des Submenüs . EINSTELLUNGEN Sprache Land Tunermodus Autom.
Kanäle Neu nummerieren Drücken Sie zur Umnummerierung des hervorgehobenen Kanals die -Taste an der Fernbedienung. Bearbeiten Sie mit Hilfe der Zifferntasten an der Fernbedienung die Kanalnummer; drücken Sie . Die Kanalreihenfolge kann wie gewünscht angepasst werden. HINWEIS: Diese Funktion ist nur im DTV-Modus verfügbar. Drücken Sie MENU. Wählen Sie mit ◄ oder ► die Option EINSTELLUNGEN und drücken zum Aufrufen des Submenüs .
Deutsch Sortieren Wählen Sie mit p oder q den gewünschten Kanal und drücken dann Ein Häkchen-Symbol erscheint. Kanäle Position 803 804 805 806 807 273 Markieren Sie mit ◄ oder ► das Überspringen-Kästchen ( ). . Kanaloptionen CH 800 TV Name Rossia 1 Rossia 24 NTV TRK 5 kamal Bibigon Service Information Radio Three DEEJAY TV Auswählen TV Name OK Eingeben RETURN Zurück Drücken Sie zur Auswahl . Ein Häkchen erscheint in dem Kästchen.
Sie können beim Untertitel und Audio-Typ zwischen Normal und Hörbehindert wählen. Wenn Hörbehindert ausgewählt ist, werden hörbehinderten Zuschauern Untertiteldienste mit zusätzlichen Beschreibungen bereitgestellt. Untertitel Sprache und Audio sprache ermöglichen Ihnen, ein Programm bzw. einen Film mit bestimmten Soundtrack-Sprache (sofern aktuell übertragen) anzusehen. Kennwort Neues Kennwort Kennwort bestätigen HINWEIS: „0000“ kann nicht verwendet werden.
Deutsch Wenn Fav. Steuerung auf Ein eingestellt ist, erscheint bei Betätigung von die Liste mit den Lieblingskanälen. Gemeinsame Schnittstelle Der Common Interface-Steckplatz an der Seite des Fersehers ermöglicht Ihnen das Einstecken eines CAM (Conditional Access Module) oder einer Karte. Diese müssen bei einem Serviceanbieter erworben werden und ermöglichen den Empfang zusätzlich abonnierter Sendungen. Weitere Informationen erhalten Sie bei einem Serviceanbieter.
Kanalgruppierung In einer Kanalliste für DTV-Dienste sind die Dienste Video, Radio und Text enthalten; die Funktion ermöglicht, durch P und P einen Kanal innerhalb einer Servicegruppe auszuwählen bzw. zwischen allen Services zu wechseln. HINWEIS: D rücken Sie zum Löschen des Kanals die PROGRAM-Taste an der Fernbedienung. Favoritenliste 800 Maori Television  Wählen Sie im Menü DTV-Einstellungen mit ▲ / ▼ die Option Kanalgruppierung. Wählen Sie mit ◄ oder ► zwischen Ein und Aus.
Deutsch Digitale Bildschirminformationen und Programmzeitschrift Im Digitalmodus bieten die Bildschirminformationen und die Programmzeitschrift Zugriff auf Einzelheiten zu sämtlichen verfügbaren Sendern. Informationen Programmzeitschrift Die Programmzeitschrift kann durch Drücken von GUIDE ausgewählt werden. Der Programmzeitschrift-Bildschirm erscheint; er enthält Informationen zum aktuellen Sender und der gerade geschauten Sendung. Es kann eine Weile dauern, bis die Informationen angezeigt werden.
Die allgemeinen Steuerungen ermöglichen Ihnen die Auswahl der Kanäle und Informationen, die Nutzung der Tonregler, die Anpassung des Bildes und die Auswahl des externen Gerätes. Kanäle auswählen Untertitel Verwenden Sie zur Auswahl eines Kanals die Zifferntasten auf der Fernbedienung. Auch können Sie Kanäle mit Hilfe der Tasten P und P aufrufen. Falls bei dem aktuellen Programm Untertitel verfügbar sind, drücken Sie zum Ein-/ Ausblenden dieser die Untertitel-Taste.
Deutsch Audioeinstellungen Lautstärkeregelung und Stummschaltung Aut. Lautstärkeanpassung Die Aut. Lautstärkeanpassung-Funktion (Lautstärkeangleichung) beschränkt hohe Lautstärken und verhindert starke Lautstärkesprünge – beispielsweise dann, wenn Sie Kanäle wechseln oder ein Werbeblock beginnt. Drücken Sie MENU. Wählen Sie mit ◄ oder ► die Option TON und drücken zum Aufrufen des Submenüs . Wählen Sie mit ▲ oder ▼ die Option Aut. Lautstärkeanpassung; stellen Sie sie mit ◄ oder ► auf Ein oder Aus ein.
Audio Beschreibung Audio Beschreibung ist eine nützliche Funktion für Blinde, da die auf dem Bildschirm erscheinenden Aktionen, Körpersprachen, Ausdrücke und Bewegungen während des Fernsehens zusätzlich beschrieben werden. Diese Funktion erlaubt Ihnen die Erklärungsweise zu wählen. Drücken Sie MENU. Wählen Sie mit ◄ oder ► die Option TON und drücken zum Aufrufen des Submenüs . Wählen Sie mit ▲ oder ▼ die Option Audio Beschreibung; drücken Sie zum Aufrufen des Submenüs .
Deutsch Breitbildanzeige Je nach dem Typ der übertragenen Sendung können die Programme in verschiedenen Formaten angezeigt werden. Verwenden Sie diese Einstellung, wenn Sie eine Breitbild-DVD, Breitbild-Videokassette oder 16:9-Sendung wiedergeben. Infolge Breitbild (außer PC) des Bereichs der Bereitbildformate (16:9, 14:9, 20:9 etc.) werden eventuell schwarze Streifen oben und unten auf dem Bildschirm angezeigt.
Deutsch Diese Einstellung zeigt das Bild ohne Overscan an, d. h. WYSIWYG. Diese Option ist nur beim Betrachten einer PC-Signalquelle via HDMI- oder PC-Anschluss verfügbar. Normal „Punkt für Punkt“ ist eine nicht skalierte Anzeige. Die Einstellung zeigt das Bild je nach Format Punkt für Punkt des Eingangssignals mit Seitenrändern und/ oder Balken oben und unten an (d. h. VGAEingangsquelle). Drücken Sie auf QUICK, um das Menü Schnellzugriff Schnellzugriff aufzurufen.
Deutsch Bildeinstellungen Die meisten Bildeinstellungsmöglichkeiten stehen sowohl im digitalen als auch im analogen Modus zur Verfügung. HINWEIS: Nicht auswählbare Funktionen werden grau dargestellt. Bildlage Bildmodus Sie können zur Anpassung der Bilddarstellung einen Bildmodus aktivieren, der vorab je nach Sendungskategorie eingestellt wurde. Drücken Sie MENU. Wählen Sie mit ◄ oder ► die Option BILD und drücken zum Aufrufen des Submenüs . Nun können Sie die Bildposition wie gewünscht anpassen.
Die Statisches Gamma-Funktion ermöglicht Ihnen die Anpassung des Schwarzpegels in einem Bild. Diese Funktion verstärkt die dunklen Bildbereiche, wobei diese definierter hervortreten. Wählen Sie im Bildeinstellungen-Menü mit ▲ oder ▼ die Option Schwarz/WeißPegel. Wählen Sie im Bildeinstellungen-Menü mit ▲ oder ▼ die Option Statisches Gamma. Stellen Sie den Pegel mit ◄ oder ► auf Aus, Niedrig, Mittel oder Hoch ein.
Deutsch Farbeinstellungen MPEG NR – Rauschunterdrückung Bei der DVD-Wiedergabe kann es je nach Kompression zu so genannten Artefakten kommen, die sich als Verzerrungen oder Blockbildung bemerkbar machen. Die MPEG NR-Funktion wirkt solchen Bildstörungen durch Glättung von Kanten entgegen. Wählen Sie im BILD-Menü mit ▲ oder ▼ die Option MPEG NR. Wählen Sie mit ◄ oder ► zwischen Aus, Niedrig, Mittel und Hoch.
Der Fotobetrachter ermöglicht Ihnen die Wiedergabe der Bilddateien von einem USB-Speichergerät.
Deutsch Wählen Sie mit ▲, ▼, ◄ oder ► das gewünschte Foto und drücken zur Anzeige . Wiederholungseinstellungen zur Diaschau Drücken Sie beim Betrachten eines Fotos zum Ändern der Einstellungen MENU. Drücken Sie beim Betrachten eines Fotos zum Ändern der Einstellungen MENU. Wählen Sie mit ◄ oder ► das Symbol ; stellen Sie die Option mit auf Ein oder Aus ein. Intervallzeit einstellen Aus Drücken Sie beim Betrachten eines Fotos zum Ändern der Einstellungen MENU. Ein 15 Sek.
Mit Info zeigen Sie die Dateistatusinformationen an (Inhaltsnummer, Fototitel, Aufnahmedatum und -uhrzeit, Auflösung etc.). Drücken Sie beim Betrachten eines Fotos zum Ändern der Einstellungen MENU. Drücken Sie beim Betrachten eines Fotos zum Ändern der Einstellungen MENU. Wählen Sie ◄ oder ► das Symbol und drücken . Wählen Sie ◄ oder ► das Symbol und drücken . Aus 0000-1.jpg Ein Auflösung: Größe: Datum: Uhrzeit: Aus 15 Sek. An 788 X 1157 0 ----/--/-- --:-- 00001 / 00004 0000-1.
Deutsch Musik über den USB-Port genießen Über den MP3-Player können Sie Musikdateien wiedergeben, die auf einem USB-Datenträger abgelegt sind. Audio-Codec Dateiendung Bitrate MPEG1 Layer2 MP3 32 kbps - 448 kbps (Bitrate) 32 kHz - 48 kHz (Abtastrate) MPEG1 Layer3 MP3 32 kbps - 320 kbps (Bitrate) 32 kHz - 48 kHz (Abtastrate) Wählen Sie mit ▲ oder ▼ die gewünschte Musikdatei und drücken zur Wiedergabe . Musikdateien abspielen Stecken Sie ein USB-Speichergerät ein und drücken an der Fernbedienung.
Deutsch Wiederholungseinstellungen Wählen Sie mit ◄ oder ► die Option Wählen Sie mit und Ordner. . zwischen Aus, Eins Wiedergabeliste verwenden Wählen Sie mit ◄ oder ► die Option , drücken Sie . Wählen Sie mit ▲ oder ▼ die gewünschte Musikdatei; drücken Sie zur Wiedergabe . Drücken Sie zum Ausblenden der Liste die EXIT-Taste an der Fernbedienung. 001.MP3 002.wma 003.avi 1/1 Aus 00:00:02 / 00:02:42 00001 / 00003 001.
Deutsch Videos über den USB-Port genießen Der Videobetrachter ermöglicht Ihnen die Wiedergabe der Videodateien von einem USBSpeichergerät. Dateiendung Container dat, mpg, mpeg MPEG ts, trp, tp vob Video-Codec MPEG1 MPEG2 MPEG2-TS H.264 H264-TS MPEG2 MPEG2-PS MPEG2 SPEC Bitrate (Mbit/s) 1080P bei 30 Bilder/s 20 MPEG2: Hauptprofil@ Hohes Level 1080P bei 30 Bilder/s 20 H264: Main- und HighProfil bei Stufe 4.
Wiedergabe Eingänge TV 1 2 3C HDMI1 HDMI2 MEDIEN PC Aus 00:00:08 / 00:02:28 00001 / 00001 002.wmv USB 2.0 Musik Film Verschieben OK Auswählen EXIT Beenden Wählen Sie mit ▲ oder ▼ den Ordner, den Sie wiedergeben möchten; drücken Sie zum Aufrufen . Blättern Sie mit P oder P nach oben oder unten. 1\1 USB:\ Zurück Musik Foto Video P Seite Verschieben OK Auswählen EXIT Beenden Wählen Sie mit ▲ oder ▼ die gewünschte Videodatei und drücken zur Wiedergabe .
Deutsch Wiederholungseinstellungen Schritt vor Drücken Sie bei der Wiedergabe eines Videos zum Ändern der Einstellungen MENU. Wählen Sie mit ◄ oder ► das Symbol und stellen die Option mit auf Aus, Eins oder Ordner ein. Diese Funktion ermöglicht Ihnen, ein Video mit jeweils einem Einzelbild anzusehen. Drücken Sie bei der Wiedergabe eines Videos zum Ändern der Einstellungen MENU. Wählen Sie mit ◄ oder ► das Symbol und drücken zur schrittweisen Wiedergabe .
Deutsch Gehe zu Zeit Diese Funktion ermöglicht Ihnen die Anzeige einer ausgewählten Zeit des Videos. Drücken Sie bei der Wiedergabe eines Videos zum Ändern der Einstellungen MENU. Wählen Sie mit ◄ oder ► das Symbol und drücken . Drücken Sie zur Eingabe der Zeit die Zifferntasten an der Fernbedienung. Drücken Sie zum Aufrufen der eingegebenen Zeit . Wiedergabe Standard 16:9 Eingangssuchzeit: 0 0 : 0 0 : 00:00:08 / 00:02:28 00001 / 00001 001.
Deutsch REGZA-LINK-Bedienung Diese Funktion nutzt CEC- (Consumer Electronics Control-) Technologie und ermöglicht die Steuerung von Toshibas REGZA-LINK-kompatiblen Geräten über die Fernsehfernbedienung. HINWEIS: Aktuell unterstützen nicht alle Toshiba-Produkte REGZA-LINK. Gerätesteuerung  Der REGZA-LINK-Modus an der Fernsehfernbedienung ermöglicht die Steuerung des REGZA-LINK-Gerätes, über das gerade die Wiedergabe erfolgt.
Durch Aktivierung der Funktion REGZA-LINK aktivieren im Menü REGZA-LINK-Einrichtung können einzelne REGZA-LINK-Funktionen eingeschaltet werden. Wiedergabe mit einem Tastendruck REGZA-LINK aktivieren Die Funktion von REGZA-LINK schaltet den im Bereitschaftsmodus befindlichen Fernseher automatisch ein und schaltet die Eingangsquelle des Fernsehers auf den mit dem Audio-/ Videogerät verbundenen Port um, indem das Audio-/Videogerät eingeschaltet bzw. wiedergegeben wird.
Deutsch Autom. Einschalten Die Einstellung Autom. Einschalten ermöglicht die automatische Ein- oder Ausschaltung des Fernsehers, sobald ein REGZA-LINK-Gerät einoder ausgeschaltet wird. Wählen Sie im Menü REGZA-LINKEinrichtung mit ▲ oder ▼ die Option Autom. Einschalten. Drücken Sie auf ◄ oder ►, um Ein oder Aus zu wählen. Autom. Standby Wenn die Funktion Autom. Standby aktiviert wird, werden automatisch durch Abschaltung des Fernsehers alle angeschlossenen REGZA-LINK-Geräte ausgeschaltet.
Wenn zwei oder mehr REGZA-LINK-Geräte mit dem Fernseher verbunden sind, erscheint ein Geräteauswahlmenü. Markieren Sie das gewünschte Gerät und drücken zur Auswahl . Fernbedienung 1 Weiterleitungskontrollpanel 1 2 3 GUIDE EXIT MENU RETURN 2 3 4 5 4 6 8 7 9 6 8 MENU ROOT CONTENTS TOP SETUP 5 7 9 HINWEIS: • Wählen Sie mit ▲ / ▼ die Option REGZA-LINK im Schnellzugriffmenü; drücken Sie dann . Das Weiterleitungskontrollpanel erscheint.
Deutsch Präferenzsteuerung Wählen Sie mit ▲ oder ▼ die Option Einschaltzeit und geben mit ◄ oder ► bzw. den Zifferntasten an der Fernbedienung die Zeit ein. Wählen Sie mit ▲ oder ▼ die Option Wiederholen und stellen sie mit ◄ oder ► auf EINMAL, TÄGLICH, Mon~Fre, Mon~Sam oder Sam~Son ein. Wählen Sie mit ▲ oder ▼ die Option Eingang und stellen sie mit ◄ oder ► auf ATV, EXT 1, EXT 2, EXT 3, HDMI 1, HDMI 2, PC oder DTV ein. Wählen Sie mit ▲ oder ▼ die Option Kanal und wechseln mit ◄ oder ► die Kanalnummer bzw.
Rufen Sie mit der -Taste an der Fernbedienung das Timer-Liste-Menü auf. Die EPG (elektronische Programmzeitschrift) erlaubt Ihnen, bis zu 9 Timer einzustellen. Sie können einen Timer innerhalb der elektronischen Programmzeitschrift für eine Sendung einstellen oder abbrechen. Wenn das Fernsehgerät in Betrieb ist und sich ein Timer meldet, dann erscheint eine Meldung, um Sie darauf aufmerksam zu machen, dass die Sendung, für die der Timer eingestellt wurde, beginnt.
Deutsch 4:3 Dehnung Bedienfeldsperre Wenn die 4:3 Dehnung aktiv ist, werden 4:3-Bilder durch diese Funktion als Vollbild angezeigt. Bedienfeldsperre deaktiviert sämtliche Bedientasten am Fernsehgerät. Die Fernbedienungstasten lassen sich nach wie vor nutzen. Wählen Sie im PRÄFERENZEN-Menü mit ▲ oder ▼ die Option 4:3 Dehnung. Drücken Sie MENU. Wählen Sie mit ◄ oder ► die Option PRÄFERENZEN und drücken zum Aufrufen des Submenüs .
Drücken Sie MENU. Wählen Sie mit ◄ oder ► die Option EINSTELLUNGEN und drücken zum Aufrufen des Submenüs . BILD TON EINSTELLUNGEN ANWENDUNGEN PRÄFERENZEN Wählen Sie mit ▲ oder ▼ die Option Systemaktualisierung; drücken Sie zum Aufrufen des Submenüs . Wählen Sie mit ▲ oder ▼ die Option AutoUpgrade; stellen Sie sie mit ◄ oder ► auf Ein oder Aus ein. Drücken Sie im Menü PRÄFERENZEN auf ▲ oder ▼ zur Auswahl von DivX Registration und drücken Sie auf . Software Upgrade(OAD) Auto-Upgrade Auto.
Deutsch Textdienste und Textinformationen Das Fernsehgerät hat einen Speicher für mehrere Textseiten, so dass es eine Weile dauern kann, bis sie geGeschäft werden. Modi einstellen Kontrolltasten Wählen Sie im PRÄFERENZEN-Menü mit ▲ oder ▼ die Option Videotext. Es folgt eine Anleitung zu den Funktionen der Texttasten an der Fernbedienung. Anzeige der Index-/Startseite: Drücken Sie auf , um die Indexseite/Startseite aufzurufen. Die angezeigte Seite hängt vom Sender ab.
• Hier stehen Ihnen die meisten Bild- und sonstigen Funktionen zur Verfügung. Nicht auswählbare Funktionen werden grau dargestellt. • Im PC-Eingangsmodus werden keine Manuelle Einstellung angezeigt. • Drücken Sie zuerst , bis die Liste der Videoeingangsmodi auf dem Bildschirm eingeblendet wird; drücken Sie dann zur Auswahl des PC-Eingangsmodus ▲ oder ▼ und . • Diese Funktion steht bei bestimmten Signalen oder wenn überhaupt kein Signal empfangen wird, nicht zur Verfügung.
Deutsch Eingangswahl und AV-Verbindungen Nutzen Sie die Eingangsauswahl, falls der Fernseher beim Einsatz eines externen Gerätes nicht automatisch umschaltet. Lip Sync-Modus Eingangsignal auswählen Mit dieser Option aktivieren Sie eine automatische Anpassung der Audio-/ videoanzeige, damit HDMI-Eingangsgeräte die Synchronisierung automatisch exakt durchführen. Alle oben genannten HDMI-Einstellungen erfordern ein geeignetes HDMI-Eingangsgerät.
Q A Q A Q A Q Warum gibt es keinen Ton oder kein Bild? Prüfen Sie, ob der Fernseher eingeschaltet ist und alle Anschlüsse korrekt vorgenommen wurden. Es wird zwar ein Bild angezeigt, aber warum mit wenig oder keiner Farbe? Die Farbeinstellung ist zur automatischen Anzeige eines optimalen Farbsystems ab Werk auf Auto eingestellt. Wenn das Bild bei Nutzung einer externen Quelle nur schwache oder keine Farben aufweist, können manchmal Verbesserungen erzielt werden.
Deutsch Technische Daten und Zubehör • Die technischen Daten des Fernsehgeräts sind wie folgt. DVB-T-Ausstrahlsysteme/Sender Ausstrahlsysteme/Sender Sichtbare Bildschirmgröße Vereinigtes PAL-I (ca.
TV mit Standfuß (ca.) Bruttogewicht TV ohne Standfuß 32AV93*G 9.5kg 32LV93*G 9.0kg 40LV93*G 14.0kg 26EL93*G 6.0kg 32EL93*G 9.0kg 32AV93*G 12.5kg 32LV93*G 12.5kg 40LV93*G 18.5kg 26EL93*G 8.5kg 32EL93*G 12.5kg 32AV93*G 8.7kg 32LV93*G 8.2kg 40LV93*G 13.0kg 26EL93*G 5.5kg 32EL93*G Abmessungen (H x B x T mm) (ca.) Deutsch Gewicht 8.
Deutsch Lizenzinformationen • • Hergestellt unter Lizenz von Dolby Laboratories. Dolby und das Doppel-D Symbol sind Warenzeichen von Dolby Laboratories. • DivX®, DivX Certified® und damit in Verbindung stehende Logos sind eingetragene Warenzeichen von DivX, Inc. und werden unter Lizenz verwendet. Geschützt durch eines oder mehrere der folgenden U.S.
Schalten Sie das Gerät aus und reinigen den Bildschirm sowie das Gehäuse mit einem weichen, trockenen Tuch. Wir raten Ihnen von der Verwendung eines Poliermittels oder eines Lösungsmittels auf dem Bildschirm oder dem Gehäuse ab, um Schäden zu vermeiden. Entsorgung... Die folgenden Informationen gelten nur für EU-Mitgliedsländer: Entsorgung von Produkten Das Symbol mit dem durchgestrichenen Mülleimer weist darauf hin, dass Produkte getrennt vom Haushaltsmüll gesammelt und entsorgt werden müssen.
© TOSHIBA Television Central Europe Sp. z o.o. 2012 Alle Rechte vorbehalten. Eine Reproduktion im Ganzen oder teilweise ohne schriftliche Zustimmung ist. TOSHIBA Television Central Europe Sp. z o.o. ul. Pokoju 1, Biskupice Podgórne, 55-040 Kobierzyce, Poland Die technischen Daten können ohne Ankündigung geändert werden.