Operation Manual

75
PROBLEM SOLVING
English
Other problems
If your TV’s problem is not addressed in this Questions and
Answers section or the recommended solution has not
worked, do one of the following:
1 Turn off your TV. After 30 seconds, turn it on.
2 Turn off the TV and unplug the power cord. After 1
minute, plug the power cord in and turn on the TV.
3 Perform the Reset TV function in the System Setup
menu.
Q
Why doesn’t the Media Player feature operate?
A
Make sure that devices are connected correctly.
Incorrect behaviour may occur with a USB Hub
connection.
Check your network setup if using DLNA CERTIFIED™
Server.
Q
Why are not 3D images displayed?
A
Ensure that there is no object blocking the infrared
signals in the infrared reception part of television and
3D glasses.
If the infrared data communication between the
television and 3D glasses is lost for 5 minutes, the
power of 3D glasses is turned off.
Q
What do the LEDs on the front of the television
indicate?
A
Check the table below.
LED indication
Condition
LED-1 LED-2
Green Orange Power ON
Programme Timer is set
Green OFF Power ON
Programme Timer is NOT set
Red Orange Power OFF (Standby)
Programme Timer is set
Red OFF Power OFF (Standby)
Programme Timer is NOT set
Orange Green For Service
SW Upgrade in Progress
Red OFF For Service
SW Upgrade Failed
Green OFF For Service
SW Upgrade Successful
LED 2LED 1