Série TL96* numérique Série UL97* numérique Série ML96* numérique EUROPEAN UNION ECOLABEL Awarded to goods or services which meet the environmental requirements of the EU ecolabelling scheme
Sommaire Sélection du mode de démarrage automatique ..................................... 33 Réglage de la Profondeur 2D à 3D ......................................................... 33 Réglage du code 3D PIN ......................................................................... 33 Sélection de la fonction Message de démarrage 3D ............................... 34 Sélection de la fonction Verrouiller 3D ...................................................
SERVICES DE TEXTE Services de texte .............................................................................................. 79 Sélection des Modes .............................................................................. 79 Informations Télétexte .......................................................................... 79 Parcourir les pages en mode Auto ......................................................... 79 Parcourir les pages en mode LIST ................................................
INSTALLATION DU TÉLÉVISEUR Français Consignes de sécurité N’ENLEVEZ AUCUN CACHE FIXE SOUS PEINE D’ÉLECTROCUTION. LA FICHE SECTEUR SERT DE DISPOSITIF DE DÉCONNEXION ET DOIT DONC ÊTRE FACILE À MANIER. Cet appareil a été conçu et fabriqué conformément aux normes internationales de sécurité. Toutefois, comme tout appareil électrique, il convient de respecter certaines consignes afin d’assurer un fonctionnement optimal en toute sécurité. Veuillez lire attentivement ce qui suit pour votre propre sécurité.
INSTALLATION DU TÉLÉVISEUR Installation et informations importantes Où installer l’appareil Placez le téléviseur à l’abri de la lumière directe du soleil et des éclairages puissants. Un éclairage doux et indirect est recommandé pour un meilleur confort de visualisation. Utilisez des rideaux ou des stores pour empêcher que la lumière du soleil n’éclaire directement l’écran. Placez le téléviseur sur une surface stable et plane capable de supporter le poids du téléviseur.
INSTALLATION DU TÉLÉVISEUR Français Lors de l’utilisation des lunettes 3D • Évitez d’utiliser la fonction 3D si vous avez consommé de l’alcool. • Si vous êtes malade ou vous sentez mal, il est conseillé de ne pas visionner d’images 3D et de consulter, si nécessaire, votre médecin.
INSTALLATION DU TÉLÉVISEUR Remarques sur le traitement des lentilles de l’obturateur à cristaux liquides des lunettes 3D • N’exercez pas de pression excessive sur les lentilles. • Veillez à ne pas rayer la surface des lentilles en les mettant en contact avec des objets pointus. • Veillez à ne pas tordre, ni faire tomber les lunettes 3D. Remarques sur les communications par infrarouge • Veillez à ne pas obstruer le signal du capteur infrarouge du téléviseur en plaçant des objets devant.
INSTALLATION DU TÉLÉVISEUR Français Veuillez prendre note La fonction de réception numérique de ce téléviseur n’est disponible que dans les pays énumérés à la section « Pays » du menu « Configuration du système ». Selon le pays et la zone, certaines fonctions du téléviseur pourront ne pas être disponibles. La réception de services supplémentaires ou modifiés à l’avenir ne peut être garantie avec ce téléviseur.
INSTALLATION DU TÉLÉVISEUR Télécommande 15 Pour modifier les positions des chaînes Pour modifier les positions des pages télétexte Référence rapide de votre télécommande. 16 Pour accéder à la page d’accueil « TOSHIBA PLACES » Quand le réseau n’est pas connecté, un message d’erreur apparaît.
CONNEXION DE VOTRE TÉLÉVISEUR Connexion d’un équipement externe Avant de connecter un équipement externe, débranchez toutes les connexions au secteur. S’il n’y a pas d’interrupteur, débranchez les fiches des prises murales. Français L'ILLUSTRATION MONTRE LE 40TL963.
CONNEXION DE VOTRE TÉLÉVISEUR Raccorder un appareil HDMI® L’entrée HDMI sur votre téléviseur reçoit les signaux vidéo numériques non compressés et le signaux audio numériques d’un appareil source HDMI. Cette fonction permet d’envoyer le signal audio provenant du téléviseur à l’amplificateur AV via le câble HDMI.
CONNEXION DE VOTRE TÉLÉVISEUR Connexion REGZA-LINK Vous pouvez commander les fonctions de base des appareils audio/vidéo connectés à l’aide de la télécommande du téléviseur si vous connectez un amplificateur AV ou un lecteur compatible REGZA-LINK. Pour une explication de la configuration et de l’utilisation, voir pages 77–78. Français l’arrière de votre téléviseur Lecteur Amplificateur AV Lecteur Pour la configuration illustrée ci-dessus, trois câbles HDMI sont nécessaires.
CONNEXION DE VOTRE TÉLÉVISEUR Connexion d’un ordinateur Pour connecter un PC à la prise HDMI Dans le cas d'une connexion RGB/PC ou HDMI, vous pouvez regarder l'affichage de votre ordinateur sur le téléviseur. Pour connecter un ordinateur à la prise HDMI du téléviseur, utilisez un câble adaptateur HDMI-à-DVI.
CONNEXION DE VOTRE TÉLÉVISEUR Français Connexion d’un réseau domestique Le port LAN vous permet de connecter le téléviseur TV à votre réseau domestique. Grâce à ce système de mise en réseau révolutionnaire, spécialement conçu pour les particuliers, vous pouvez accéder aux fichiers image, vidéo et audio enregistrés sur un serveur DLNA CERTIFIED™ et les lire/afficher sur votre téléviseur.
CONNEXION DE VOTRE TÉLÉVISEUR Commandes et connexions d’entrée Il est possible de connecter un grand nombre d’équipements externes différents aux prises d’entrée sur le côté du téléviseur. Tous les réglages nécessaires du téléviseur se font par la télécommande. Les touches à l’avant de l’appareil peuvent toutefois être utilisées pour certaines fonctions. L'ILLUSTRATION MONTRE LE 40TL963.
CONNEXION DE VOTRE TÉLÉVISEUR Structure du MENU Français Pour afficher le menu principal (illustration ci-dessous), appuyez sur MENU sur la télécommande. Guide Recherche genre Programmations Réglage Programmes TV Lecteur multimedia Fonction Couche 1 Appuyez sur MENU. Bibliothèque Téléviseur connecté Couche 2 Couche 3 Appuyez sur C c / B. Appuyez sur C c. Appuyez sur OK. Appuyez sur BbC c.
CONFIGURATION DE VOTRE TÉLÉVISEUR h Application de démarrage Avant de mettre le téléviseur sous tension, assurez-vous, le cas échéant, que votre décodeur/enregistreur multimédia est en veille. Pour configurer le téléviseur, utilisez les touches de la télécommande comme indiqué à la page 9. Appuyez sur OK, et l'écran Type de réseau apparaît. Appuyez sur C ou c pour sélectionner Avec fil ou Sans fil. Type de réseau Veuillez sélectionner un type de réseau. Avec fil a Appuyez sur la touche 1.
CONFIGURATION DE VOTRE TÉLÉVISEUR Quand le message «Le réglage sans fil est terminé.» apparaît sur l'écran, appuyez sur OK. L'écran passe à l'étape 12. Français k l Quand la fonction DHCP du routeur connecté à ce téléviseur est activée, vous pouvez régler Config auto sur Marche ou Arrêt. (Il doit être habituellement réglé sur Marche.) Quand la fonction DHCP du routeur est désactivée, réglez Config auto sur Arrêt, et réglez l'adresse IP et les adresses DNS manuellement.
CONFIGURATION DE VOTRE TÉLÉVISEUR n Appuyez sur OK. Si votre pays prend en charge le Guide du réseau, l'écran du Type de guide apparaît. Type de guide r Appuyez sur C ou c pour afficher la liste des chaînes DTV (numériques) ou des chaînes ATV (analogiques). s Utilisez B ou b pour vous déplacer dans la liste afin de sélectionner une chaîne, puis appuyez sur OK pour la visualiser. Veuillez sélectionner le type de guide.
CONFIGURATION DE VOTRE TÉLÉVISEUR Appuyez sur B ou b pour mettre en surbrillance Mémoriser la position, puis appuyez sur OK pour mémoriser la position de l’antenne parabolique. Répétez les étapes 20 et 21 pour le prochain satellite si nécessaire. Français Si votre antenne parabolique n’est pas mobile, l’écran Positionnement ne s’affiche pas. Réglez manuellement la position de l’antenne parabolique correspondant à la puissance de signaux maximale.
CONFIGURATION DE VOTRE TÉLÉVISEUR Sélection de l'opérateur : Vous pouvez choisir le câblo-opérateur en fonction du Pays que vous avez réglé. Type de balayage DTV : Réglages satellite Le menu Configuration du système vous permet d’ajouter les satellites que vous souhaitez régler et de les paramétrer de façon individuelle. Pour ajouter un satellite : a Appuyez sur MENU / C c pour mettre en surbrillance l’icône Réglage.
Français CONFIGURATION DE VOTRE TÉLÉVISEUR Pour modifier les réglages satellite : Pour supprimer un transpondeur : a Dans le menu Réglages satellite, appuyez sur B pour mettre en surbrillance Type de commutateur. a b Appuyez sur C ou c pour sélectionner Sans, ToneBurst, DiSEqC 2way ou DiSEqC 4way comme type de commutateur de satellite. b c Appuyez sur b pour mettre en surbrillance Alimentation LNB, puis appuyez sur C ou c pour sélectionner Marche ou Arrêt.
CONFIGURATION DE VOTRE TÉLÉVISEUR Pour sélectionner Réglages LNB : Dans le menu Réglages satellite, appuyez sur B ou b pour sélectionner la ligne de satellite requise, puis appuyez sur OK. b Appuyez sur C ou sur c pour mettre en surbrillance LNB, puis appuyez sur la touche VERTE. Le téléviseur se met à rechercher tous les services DTV et/ou ATV disponibles. Vous devez laisser le téléviseur mener la recherche jusqu’à son terme.
CONFIGURATION DE VOTRE TÉLÉVISEUR a ATV réglage manuel Syntonisation Dans le menu Configuration du système , appuyez sur b pour sélectionner ATV réglage manuel puis appuyez sur OK. Configuration du système Français Langue menu Le téléviseur peut être réglé manuellement à l’aide de la fonction ATV réglage manuel.
CONFIGURATION DE VOTRE TÉLÉVISEUR g h Passer Chaque signal apparaîtra à l’écran. S’il ne s’agit pas de votre enregistreur multimédia, appuyez à nouveau sur B ou b pour relancer la recherche. Lorsque le signal de votre enregistreur multimédia est localisé, appuyez sur c pour sélectionner Chaîne. Utilisez B, b, C et c pour insérer les caractères requis, par exemple VCR. Pour empêcher la visualisation de certaines chaînes, vous pouvez les bloquer.
CONFIGURATION DE VOTRE TÉLÉVISEUR Positions de tri Il est possible de déplacer et de mémoriser les chaînes aux positions de votre choix. Français a b Réglage TNT manuel REMARQUE : Cette fonction dépend du réglage Ant/Câble/Satellite . Sélectionnez ATV réglage manuel dans le menu Configuration du système. Recherche manuelle Cette fonction est destinée aux techniciens ou vous pouvez l’utiliser pour saisir directement des chaînes si vous connaissez le canal multiplex.
CONFIGURATION DE VOTRE TÉLÉVISEUR Recherche manuelle pour DVB-C Réglages DTV Lorsque la fonction Ant/Câble/Satellite est définie sur Câble, les options de la fonction Réglage TNT manuel disponibles sont les suivantes : Chaînes (Antenne/Câble) Fréquence : entrez la fréquence à utiliser pour le balayage Modulation : choisissez l’une des cinq options de modulation QAM disponibles Mettez en surbrillance Commencer scan, puis appuyez sur OK.
CONFIGURATION DE VOTRE TÉLÉVISEUR Français Dép. — Appuyez sur la touche VERTE pour activer la fonction Dép.. Appuyez sur les touches B ou b pour sélectionner la chaîne que vous souhaitez déplacer et appuyez sur OK pour vérifier. Si vous souhaitez déplacer plusieurs chaînes à la fois, sélectionnez une autre chaîne, puis validez de la même façon. Recommencez la procédure autant de fois que nécessaire.
COMMANDES ET FONCTIONS Commandes générales Sélection des chaînes Pour sélectionner une chaîne, utilisez les touches numériques de la télécommande. Menu rapide Les chaînes peuvent aussi être sélectionnées en utilisant PU et Pu. Pour afficher des informations à l’écran, notamment une chaîne, le mode d’entrée ou le signal mono/stéréo, appuyez sur . Appuyez une seconde fois pour les faire disparaître.
COMMANDES ET FONCTIONS Utilisation des fonctions 3D Pour régler les lunettes 3D: Avant d’utiliser les programmes 3D, lisez la section « Lors de l’utilisation des lunettes 3D », page 6.
COMMANDES ET FONCTIONS Affichage des images 3D Sélection du mode d’affichage ou du format 3D Les signaux vidéo entrant peuvent être au format 2D ou 3D. Un signal 2D peut être vue en 2D ou en 3D, et un signal 3D peut être vue en 2D ou en 3D. Si la télévision détecte qu’un signal est en 3D, elle peut passer automatiquement en mode 3D – Voir « Sélection du mode de démarrage automatique » (à la page 33). Sinon, vous pouvez modifier le mode de visualisation à l’aide du bouton 3D.
Français COMMANDES ET FONCTIONS Pour sélectionner le format 3D dans le Menu rapide en mode 3D : Pour sélectionner le format 2D dans le Menu rapide en mode 2D : a a Appuyez sur QUICK pour ouvrir le Menu rapide. Appuyez sur QUICK pour ouvrir le Menu rapide. b Appuyez sur B ou b pour sélectionner Réglages 3D, puis appuyez sur OK. b Appuyez sur B ou b pour sélectionner Réglages 3D, puis appuyez sur OK. c Appuyez sur B ou b pour sélectionner Sélectionner Format 3D, puis appuyez sur OK.
COMMANDES ET FONCTIONS À partir du Menu Rapide : Sélection du mode de démarrage automatique Permet de contrôler le téléviseur lorsqu’il détecte un signal 3D. a a Appuyez sur MENU / C c pour mettre en surbrillance l’icône Réglages. b b Appuyez sur B ou b pour sélectionner Profondeur 2D à 3D puis appuyez sur OK. Appuyez sur B / C c pour mettre en surbrillance l’icône Préférences et appuyez sur OK. c Appuyez sur C ou c pour sélectionner 1, 2, 3, 4 ou 5.
COMMANDES ET FONCTIONS Sélection de la fonction Message de démarrage 3D e Sélection de la fonction Activer Minuteur 3D Français Lorsque cette fonction est activée, un message s’affiche à l’écran lors de la réception d’un signal 3D. a Dans le menu Préférences, appuyez sur B ou b pour sélectionner Réglages 3D puis appuyez sur OK. b Appuyez sur B ou b pour sélectionner Réglages Sécurité 3D, puis appuyez sur OK. Appuyez sur C ou c pour sélectionner Marche.
COMMANDES ET FONCTIONS Réglages du son Amélioration des voix Amélioration des voix améliore les plages de fréquences de la voix de l'enceinte, les rendant plus faciles d'entendre ce qu'elles disent. Commandes de volume et coupure du son Volume Appuyez sur les touches 2+ ou 2– pour régler le volume. pour couper le son. Appuyez une seconde fois pour Dans le menu Réglages sonores avancés, appuyez sur B ou b pour sélectionner Amélioration des voix. b Appuyez sur C ou c pour sélectionner Marche ou Arrêt.
Français COMMANDES ET FONCTIONS Réglage Niveau Audio Réglages du casque Lorsque vous passez d’une chaîne DTV à 5,1 canaux à une chaîne DTV à 2 canaux, à une chaîne ATV ou à une entrée externe, il peut parfois exister de grandes différences entre les niveaux de volume. La fonction Réglage Niveau Audio permet de réduire ces différences de volume. Ce réglage permet d’ajuster le son lors de la connexion des écouteurs.
COMMANDES ET FONCTIONS Affichage grand écran En fonction du type d’émission diffusée, les programmes peuvent être affichés en plusieurs formats. 4:3 Utilisez ce réglage pour voir une émission en format 4:3 véritable. Français PLEIN ÉCRAN Utilisez ce réglage lorsque vous regardez une émission d’un lecteur de disque numérique vidéo grand écran, une cassette vidéo grand écran ou une émission 16:9 (lorsqu’elles sont disponibles). En raison de la gamme de formats grand écran (16:9, 14:9, 20:9 etc.
COMMANDES ET FONCTIONS Ce réglage affiche l’image sans surbalayage, c’est-à-dire tel-tel. PC NORMAL Ce réglage affiche l’image sans surbalayage, c’est-à-dire tel-tel. Cette option est disponible uniquement quand vous regardez une source de signal PC via HDMI ou borne PC. Français NATIF PC PLEIN ÉCRAN Pixel par pixel Appuyez sur la touche Ce réglage affiche l’image sans surbalayage ou sans côté ni panneau latéral.
COMMANDES ET FONCTIONS Réglages de l’image Préférences d’affichage Vous pouvez personnaliser les réglages de mode d’image courants comme vous le souhaitez. Par exemple, lorsque vous sélectionnez « Dynamique », si vous modifiez certaines options telles que Rétroéclairage, Contraste, Luminosité, Couleur, Teinte, Netteté, ainsi que les options des Réglages avancés de l’image, vos nouveaux réglages sont enregistrés pour le mode d’image « Dynamique ».
Français COMMANDES ET FONCTIONS Réglage des couleurs de base Capteur automatique de luminosité La fonction Réglage des couleurs de base permet de régler les couleurs individuelles selon vos préférences. Elle peut s’avérer utile en cas d’utilisation d’une source externe. La fonction Capteur automatique de luminosité permet d’optimiser automatiquement le niveau de rétroéclairage en fonction des conditions d’éclairage ambiant de la pièce.
COMMANDES ET FONCTIONS DNR – Réduction numérique du bruit 4:3 étiré La fonction DNR vous permet « d’adourcir » la représentation à l’écran d’un signal faible afin de réduire l’effet de bruit. Lorsque l’option 4:3 étiré est activée, le système de modification de la taille transforme les émissions de format 4:3 en images plein écran. a Appuyez sur C ou c pour sélectionner Faible, Moyen, Fort, Auto ou Arrêt.
COMMANDES ET FONCTIONS Français Utilisation de votre réseau domestique Ce téléviseur est un lecteur DLNA CERTIFIED™. Ce téléviseur prend en charge le contenu numérique enregistré dans un produit DLNA CERTIFIED™ disposant d’une fonction de serveur. Si vous souhaitez utiliser ce téléviseur comme lecteur DLNA CERTIFIED™, vous devez configurer le réseau sur votre téléviseur (voir page 14). Si vous souhaitez utiliser votre réseau domestique, vous devez configurer le réseau sur votre téléviseur.
COMMANDES ET FONCTIONS Réglage assisté Vous pouvez sélectionner le type de réseau. a Dans le menu Préférences, appuyez sur B ou b pour sélectionner Configuration réseau et appuyez sur OK. b Appuyez sur B ou b pour sélectionner Type de réseau et appuyez sur C ou c pour sélectionner Sans fil. c Appuyez sur B ou b pour sélectionner Réglages sans fil et appuyez sur OK. d Appuyez sur B ou b pour sélectionner Réglage assisté et appuyez sur OK.
COMMANDES ET FONCTIONS d Français e f g h Appuyez sur B ou b pour sélectionner Réglages manuelle et appuyez sur OK. Appuyez sur B ou b pour sélectionner Nom du réseau et appuyez sur OK. La fenêtre Clavier virtuel s’affiche. j k Vous pouvez confirmer les paramètres définis lors des réglages sans fil. a Appuyez sur QUICK pour ouvrir le Menu rapide. b Appuyez sur B ou b pour sélectionner Informations sans fil, puis appuyez sur OK. Entrez le nom du réseau à l’aide du clavier virtuel (voir page 47).
COMMANDES ET FONCTIONS REMARQUE : Même lors de l’utilisation d’un point d’accès pour IEEE 802.11n lorsque l’option Cryptage est définie sur WEP ou TKIP, il est possible que la valeur Vitesse soit faible. Il est recommandé de régler l’option Cryptage sur AES (reportezvous à la section « Réglages manuelle » à la voir page 43). Remarques concernant l’environnement de réseau local sans fil : a Dans le menu Préférences, appuyez sur B ou b pour sélectionner Configuration réseau et appuyez sur OK.
COMMANDES ET FONCTIONS Adresse MAC Réglages de DNS Vous pouvez afficher l’adresse MAC fixe du téléviseur et de l’adaptateur WLAN bibande, si ce dernier est installé. REMARQUE : Lorsque la fonction DHCP du routeur raccordé à ce téléviseur est réglée sur Arrêt, réglez Config auto sur Arrêt, puis définissez manuellement la ou les adresses DNS. Votre fournisseur de services Internet a dû vous fournir ces adresses.
COMMANDES ET FONCTIONS Réglage du périphérique réseau Utilisation du clavier virtuel Vous pouvez saisir du texte à l’aide du clavier virtuel. La fenêtre du clavier virtuel s’affiche lorsque vous appuyez sur OK dans un champ compatible avec la saisie de texte. Réglages périphérique externe Cette installation vous permet de commander un réseau domestique connecté à votre téléviseur à partir d’un appareil extérieur.
COMMANDES ET FONCTIONS Réglage du nom de périphérique Français Le nom du téléviseur est modifiable. a Dans le menu Préférences, appuyez sur B ou b pour sélectionner Réglage du périphérique réseau et appuyez sur OK. b Appuyez sur B ou b pour mettre en surbrillance Réglage du nom de périphérique et appuyez sur OK. c d Mettez en surbrillance le champ Nom appareil, puis appuyez sur OK. La fenêtre Clavier virtuel s’affiche. Entrez le nom de l’appareil à l’aide du clavier virtuel (voir page 47).
COMMANDES ET FONCTIONS Fonction d'enregistrement sur disque dur USB Préparation du disque dur USB pour l'enregistrement Pour connecter un disque dur USB (non fourni) À USB1 ou USB2 REMARQUE : • Afin d'utiliser cette fonction la mémoire flash USB ou le disque dur USB doit être connecté au téléviseur. • Les émissions enregistrées sur le disque dur USB peuvent uniquement être vues sur ce téléviseur.
COMMANDES ET FONCTIONS Comment régler les enregistrements via le Guide des programmes Français La programmation d’un enregistrement peut être réalisée facilement en utilisant le Guide des émissions ou en spécifiant la date et l’heure. Pour rechercher et enregistrer un programme en utilisant Recherche genre. a VEUILLEZ NOTER : Quand une émission programmée est sur le point de commencer, un écran d’informations s’affiche pour vous donner la possibilité de visualiser ou d’annuler l’émission.
COMMANDES ET FONCTIONS Pour programmer la minuterie a b Appuyez sur MENU / C c/ B /C c pour mettre en surbrillance les icônes Programmes TV / Programmations et appuyez sur OK. Pour faire une programmation en utilisant l’écran d’informations a Appuyez sur pour afficher l’écran d’informations contenant les détails de la chaîne et de l’émission visualisée. 8888 D+ 3D ITV1 London ASTRA 19.2° E 6:00 Jeu, 11 Oct Français Sélectionnez la colonne non programmée (colonne vierge) et appuyez sur OK.
COMMANDES ET FONCTIONS • Comme l’heure de l’émission affichée est calculée à partir de l’information réelle de l’enregistrement, il se peut qu’il ne corresponde pas à l’heure d’enregistrement sur le disque dur USB. b Pour vérifier une programmation Français a Appuyez sur B ou b sur l’écran Programmations pour vérifier la programmation. Pour changer l'ordre dans lequel les titres apparaissent dans la liste, appuyez sur la touche BLEUE.
COMMANDES ET FONCTIONS Pour protéger ou déprotéger une émission enregistrée Capacité du disque dur USB Protéger un programme empêche qu’il soit supprimer accidentellement. Vous pouvez vérifier la capacité restante du disque dur USB en utilisant Espace disponible. Sélectionnez le titre de l’émission que vous souhaitez protéger et appuyez sur la touche VERT. L’icône apparaît à coté du titre et le programme est protégé.
COMMANDES ET FONCTIONS d Appuyez sur B ou b pour sélectionner Durée de l’enregistr. Une touche. Réglage Enregistrement Pour régler la durée de marge pour l’heure de début et de fin de l’enregistrement programmé. a Dans l’écran Réglage Enregistrement, appuyez sur B ou b pour sélectionner Avan.l’heure de début d’enregist.. b Appuyez sur C ou c pour sélectionner une durée. Sélection de l'appareil Français Durée de l'enregistr. Une touche Heure de fin de l'émission Taille du TimeShift 512 MB Avan.
COMMANDES ET FONCTIONS Pour formater un disque dur USB Sur l'écran Réglage Enregistrement, appuyez sur B ou b pour sélectionner Formater appareil et appuyez sur OK. b Appuyez sur C ou c pour sélectionner Oui dans la fenêtre de confirmation qui apparaît et appuyez sur OK. Le formatage démarre. Attendez que le formatage se termine.
COMMANDES ET FONCTIONS Utilisation de Toshiba Places Français Un nouveau service en nuage, où divers contenus (séquences vidéo, photos, etc.) peuvent être vus et partagés sur le Web à l’aide d’une interface utilisateur simple appelée « Toshiba Places ». REMARQUE : Vous devez configurer votre réseau local avant d’utiliser cette fonction (voir page 14).
COMMANDES ET FONCTIONS Utilisation de Intel® Wireless Display Pour quitter Intel® Wireless Display Quittez Intel® Wireless Display en appuyant sur le bouton de déconnexion sur le logiciel Intel® WiDi en appuyant sur EXIT sur la télécommande du téléviseur. Intel® Wireless Display (Intel® WiDi) est pris en charge par ce téléviseur. Vous pouvez utiliser votre téléviseur comme affichage secondaire pour un ordinateur avec Intel® Wireless Display.
COMMANDES ET FONCTIONS Français Utilisation du lecteur multimédia Ce téléviseur vous permet d’écouter de la musique ou de regarder des photos ou des films stockés sur un périphérique USB connecté au port USB. Vous pouvez par ailleurs lire des fichiers image, vidéo et audio depuis votre ordinateur en raccordant le téléviseur à votre réseau domestique.
COMMANDES ET FONCTIONS Utilisation du lecteur multimédia avec un serveur DLNA CERTIFIED™ Affichage de fichiers photo (sur le serveur DLNA CERTIFIED™ ou le périphérique USB) Vous devez configurer un réseau domestique avant d’utiliser cette fonction (voir page 14). a c Appuyez sur B / C c pour mettre en surbrillance Lecteur multimédia réseau et appuyez sur OK. Affichage multiple (Photo USB) Cet affichage vous permet de rechercher des photos dans la grille.
COMMANDES ET FONCTIONS Vue simple Français Dans ce mode, seuls les fichiers situés dans le répertoire sélectionné peuvent s’afficher. Cet affichage vous permet de changer de photo manuellement. Lorsque vous passez de l’affichage multiple au mode Vue simple, la photo actuellement sélectionnée s’affiche. a Appuyez sur c pour afficher la photo suivante. Appuyez sur C pour afficher la photo précédente. b Appuyez sur B pour faire pivoter l’image de 90° dans le sens des aiguilles d’une montre.
COMMANDES ET FONCTIONS Pour sélectionner le mode de lecture à partir du Menu rapide a Visionnage de fichiers vidéo (sur le serveur DLNA CERTIFIED™ ou le périphérique USB) Appuyez sur QUICK pour ouvrir le Menu rapide en mode Multi vue. Vous pouvez sélectionner des films à partir d'une Multi vue des fichiers disponibles. Appuyez sur B ou b pour sélectionner Mode de lecture et appuyez sur OK. c Appuyez sur B ou b pour sélectionner Mode 2D, Mode 3D 1 ou Mode 3D 2.
Français COMMANDES ET FONCTIONS Pendant la lecture : Reprise de la lecture (USB uniquement) • Appuyez sur W/w pour mettre en pause. PAUSE peut ne pas être disponible en fonction du contenu ou DMS. • Pour reprendre normalement la lecture, appuyez sur c (lecture). • Pour une lecture en mode de retour rapide ou d’avance rapide, appuyez sur CC ou cc pendant la lecture. Chaque fois que vous appuyez sur CC ou cc, la vitesse de lecture change.
COMMANDES ET FONCTIONS Pour lire un contenu DivX Plus HD : Ce téléviseur permet de lire les fichiers achetés ou loués auprès de services de vidéo à la demande (VOD) DivX®. Lorsque vous achetez ou louez des fichiers sur Internet sur des sites de vidéo à la demande DivX®, vous êtes invité à saisir un code d’inscription. • Pour utiliser l’avance ou le retour rapide pendant la lecture, appuyez sur CC ou cc pendant la lecture. Chaque fois que vous appuyez sur CC ou cc, la vitesse de la lecture change.
COMMANDES ET FONCTIONS Lecture de fichiers musicaux (sur le serveur DLNA CERTIFIED™ ou le périphérique USB) Vous pouvez écouter de la musique à partir d'une Multi vue des fichiers disponibles. Pour définir le mode de répétition : a Appuyez sur QUICK pour ouvrir le Menu rapide. b Appuyez sur B ou b pour sélectionner Répéter. c Appuyez sur C ou c pour sélectionner Arrêt, Tout ou 1. Français Multi Vue (Musique USB) Retour Mode 5/9999 /Folder/select Folder or File xxxxxxxxx xxxxxxxxx.
COMMANDES ET FONCTIONS Autres fonctions Minuteries Programmations (numérique uniquement) La fonction Bloc. clavier vous permet de désactiver les touches du téléviseur. Toutes les touches de la télécommande continueront de fonctionner normalement. Cette fonction permet de programmer le téléviseur pour qu’il se règle sur une chaîne spécifique à une heure choisie.
COMMANDES ET FONCTIONS Pour annuler la minuterie de marche Minut. Marche Français Cette fonction vous permet de régler le téléviseur de façon à ce qu’il se mette en marche automatiquement sur une chaîne spécifique à une heure précise ou après un certain laps de temps. a Appuyez sur MENU / C c pour mettre en surbrillance l'icône Fonction. b Appuyez sur B / C c pour mettre en surbrillance l'icône Minut. Marche et appuyez sur OK.
COMMANDES ET FONCTIONS Réglages Économie d’énergie Informations sur l'écran numérique En mode numérique, les informations à l’écran et le guide des programmes donnent accès aux détails des émissions pour toutes les chaînes disponibles. Extinction automatique Le téléviseur s’éteint automatiquement (il passe en mode de veille) au bout de 4 heures si vous n’appuyez sur aucune touche de la télécommande ou du téléviseur. Appuyez sur MENU / C c pour mettre en surbrillance l'icône Réglages.
COMMANDES ET FONCTIONS Appuyez sur QUICK pour ouvrir le Menu rapide. Utilisation de EPG (Guide électronique des programmes) Appuyez sur b pour mettre en surbrillance Plus d’information, puis appuyez sur OK. Vous pouvez choisir le système EPG souhaité entre le Guide Hertzien ou MediaGuide qui nécessite une connexion Internet.
COMMANDES ET FONCTIONS Si l'émission n'est pas diffusée, l'écran de présentation apparaît montrant les émissions à venir. Sélection/recherche du genre Dans l’écran du guide, vous pouvez utiliser les fonctions de sélection et de recherche du genre. a Menu principal de navigation a Appuyez sur B ou b pour mettre en surbrillance Couleur genre dans le Menu rapide et appuyez sur OK. Dans le menu secondaire de navigation, appuyez sur C pour afficher le menu principal de navigation.
Français COMMANDES ET FONCTIONS • Rovi Corporation et/ou ses filiales et les sociétés affiliées ne sont d'aucune façon responsables pour l'exactitude ou la disponibilité des informations sur les programmes ou d'autres données dans le système Rovi Guide et ne peuvent pas garantir le disponibilité du service dans votre régions.
COMMANDES ET FONCTIONS Réglages numériques : Options Chaînes Niveau verrouillage La fonction Contrôle parental vous permet d’empêcher l’accès à certaines émissions en fonction de leur niveau de classement. Si vous avez défini un code PIN, vous devez le saisir avant de pouvoir définir le niveau. Dans le menu Réglages DTV, appuyez sur B ou b pour sélectionner Contrôle parental, puis appuyez sur OK. b Utilisez C ou c pour choisir une option (Sans ou les tranches d’âges (4-17 ou 4-18 selon le Pays)).
COMMANDES ET FONCTIONS Omission de chaînes Réglages numériques : autres réglages Cette fonction vous permet de choisir les chaînes que vous souhaitez omettre lorsque vous utilisez Pu ou PU pour effectuer la syntonisation. Français a Sélectionnez la chaîne que vous souhaitez omettre dans votre liste de chaînes. b Dans le Menu rapide, appuyez sur b pour sélectionner Options Chaînes, puis appuyez sur OK. c Appuyez plusieurs fois sur c pour mettre en surbrillance la case d’omission (8).
COMMANDES ET FONCTIONS Mise à jour et licences du logiciel Interface commune Le connecteur d’interface commune, situé sur le côté du téléviseur, permet d’insérer un module d’accès conditionnel (CAM) et une carte. Ceux-ci peuvent être obtenus auprès d’un fournisseur de services et permettent de visualiser des émissions disponibles avec un abonnement. Pour obtenir des compléments d’information, veuillez contacter un fournisseur de services.
COMMANDES ET FONCTIONS Français Informations système et Réinitialiser TV Paramètres PC Informations système Position horizontale et Position verticale Cette fonction permet de vérifier la version du logiciel installé. En mode DTV, d’autres informations sont fournies, notamment la puissance et la qualité du signal, la fréquence centrale, la modulation, etc. Connectez le PC (comme indiqué à la section « Connexion d’un ordinateur ») et vérifiez qu’une image s’affiche sur l’écran du téléviseur.
COMMANDES ET FONCTIONS Horloge d’échantillonnage Sélection des entrées et connexions AV Le réglage de la fonction Horloge d’échantillonnage permet de modifier le nombre d’impulsions par balayage et, par conséquent, d’éliminer les lignes verticales sur l’écran. Voir page 10 pour une image détaillée indiquant les connexions recommandées. a La plupart des enregistreurs multimédia et décodeurs envoient un signal par le câble Péritel pour commuter le téléviseur sur la prise d’Entrée correcte.
Français COMMANDES ET FONCTIONS Étiquetage des sources d’entrée vidéo Sortie audio numérique Ces étiquettes d’entrée s’affichent dans le sélecteur d’entrée. Vous pouvez étiqueter les entrées vidéo en fonction des appareils que vous avez raccordés au téléviseur. Lors du branchement d’un amplificateur Surround Sound sur la sortie audio numérique (Sony/Philips Digital Interface Format [S/PDIF]), les options suivantes peuvent être sélectionnées ou ajustées.
COMMANDES ET FONCTIONS Utilisation de REGZA-LINK Contrôle ampli Le réglage Contrôle ampli est utilisé pour mettre sous/hors tension l'amplificateur REGZA-LINK connecté. Il s’agit d’une nouvelle fonction qui utilise la technologie CEC et vous permet de contrôler les appareils Toshiba compatibles REGZA-LINK depuis la télécommande du téléviseur via la connexion HDMI (page 12). Dans le menu Réglage REGZA-LINK, appuyez sur b pour mettre en surbrillance Contrôle ampli.
Français COMMANDES ET FONCTIONS REMARQUE : • Ces fonctions varient en fonction de l’appareil connecté. • Si vous sélectionnez la source d’entrée REGZA-LINK dans la fenêtre contextuelle, certains appareils REGZA-LINK peuvent se mettre en marche automatiquement. • Lorsque vous allumez le téléviseur, l’icône REGZA-LINK apparaît au bout de quelques minutes. Lorsque vous débranchez un câble HDMI, l’icône disparaît au bout de quelques minutes.
SERVICES DE TEXTE Services de texte Parcourir les pages en mode Auto Si Fastext est disponible, vous verrez apparaître quatre titres en couleur au bas de l’écran. Ce téléviseur est équipé d’une mémoire Télétexte multi-pages dont le chargement nécessite un certain temps. Il offre deux modes de visualisation du texte : Auto affiche Fastext, si celui-ci est disponible. Liste garde en mémoire vos quatre pages préférées.
SERVICES DE TEXTE Touches de commande Vous trouverez ci-dessous un guide des fonctions des touches Télétexte de la télécommande. Français k Pour afficher la page d’index/initiale : Appuyez sur k pour accéder à la page d’index ou la page initiale. La page affichée dépendra du fournisseur de services. TEXT Pour afficher une page Télétexte : Appuyez sur TEXT pour afficher la fonction télétexte. Appuyez à nouveau pour superposer le télétexte sur une image normale.
RÉSOLUTION DES PROBLÈMES Questions-Réponses Q R Vous trouverez ci-dessous les réponses aux questions les plus fréquentes. a Il n’y a pas d’image ni de son ? Vérifiez que le téléviseur n’est pas en mode veille. Vérifiez la fiche secteur et toutes les connexions au secteur. b Il y a bien une image, mais la couleur est faible ou absente ? 1 Q R Q R Q R Q R Q R Q R En laissant la source externe en lecture, sélectionnez Système couleur dans le menu Configuration du système.
Français RÉSOLUTION DES PROBLÈMES Q R Q R Q R Q R Q R Qu’est-ce que DVB-T ? Q R Q R Digital Video Broadcast (radiodiffusion vidéonumérique) via une antenne. Qu’est-ce que DVB-C ? Digital Video Broadcast (radiodiffusion vidéonumérique) via une connexion câblée. Comment les canaux DTV sont-ils sélectionnés? Sélectionnez-les à partir des la liste de tous les canaux (touché LIST).
RÉSOLUTION DES PROBLÈMES Pourquoi la fonction Lecteur multimédia ne fonctionne-t-elle pas ? Q R Pourquoi des images 3D ne sont-elles pas affichées? Q R Q R Pourquoi le disque dur USB ne fonctionne t-il pas? Vérifiez que les appareils sont correctement raccordés. Un comportement inattendu peut se produire en cas de connexion via un concentrateur USB. Vérifiez que votre réseau utilise un serveur DLNA CERTIFIED™.
INFORMATIONS Français Informations relatives aux licences • Fabriqué sous licence de Dolby Laboratories. Dolby et le symbole du double D sont des marques de Dolby Laboratories. • This product contains technology subject to certain intellectual property rights of Microsoft. Use or distribution of this technology outside of this product is prohibited without the appropriate license(s) from Microsoft.
INFORMATIONS Français Nettoyage de l’écran et de la carcasse Éteignez le téléviseur, nettoyez l’écran et la carcasse avec un chiffon doux et sec. Nous recommandons de ne pas utiliser de produits nettoyants ou solvants sur l’écran ou la carcasse au risque de les endommager.
INFORMATIONS Informations Avant de connecter un équipement externe, débranchez toutes les connexions au secteur. S’il n’y a pas d’interrupteur, débranchez les fiches des prises murales.
INFORMATIONS Signaux vidéo ou PC pris en charge via les bornes HDMI Format Résolution Fréquence V Fréquence H Fréquence pixel 480i 720 × 480i 59,940/60,000 Hz 15,734/15,750 kHz 27,000/27,027 MHz 576i 720 × 576i 50,000 Hz 15,625 kHz 27,000 MHz 480p 720 × 480p 59,940/60,000 Hz 31,469/31,500 kHz 27,000/27,027 MHz 576p 720 × 576p 50,000 Hz 31,250 kHz 27,000 MHz 1080i 1920 × 1080i 59,940/60,000 Hz 33,716/33,750 kHz 74,176/74,250 MHz 1080i 1920 × 1080i 50,000 Hz 28,125 kHz 74,2
INFORMATIONS Format pris en charge par le lecteur multimédia Lecteur Format du Extension multimédia support du fichier Photo JPEG .jpg .jpeg Codec vidéo Codec audio JPEG USB DMS Oui Oui Oui Non Oui Non Français – MPO .mpo MPO – BMP .bmp BMP – Film AVI .avi MPEG-2 MPEG-4 part 2 H.264 (MPEG-4 AVC) DivX Xvid MPEG-1/2 Layer2 MPEG-1/2 Layer3 Dolby Digital (AC-3) L-PCM ADPCM MPEG-2/4 LC AAC MPEG-4 HE-AAC Oui Non MPEG-2 PS .mpg .
INFORMATIONS Lecteur Format du Extension multimédia support du fichier Film Codec audio USB DMS RealMedia .rm .rmvb RealVideo 8,9,10 Dolby Digital (AC-3) MPEG-2/4 LC AAC Oui Non Flash Video (FLV1) .flv .swf Sorenson H.263 (FLV1) H.264 (MPEG-4 AVC) MPEG-1/2 Layer3 MPEG-2/4 LC AAC L-PCM ADPCM Oui Non 3GPP .3gp MPEG-4 part 2 H.264 (MPEG-4 AVC) MPEG-2/4 LC AAC AMR Oui Non Motion JPEG .avi .mp4 .mkv JPEG L-PCM ADPCM Oui Non MP3 .mp3 – MPEG-1/2 Layer-3 Oui Oui MP4 .
INFORMATIONS Format 3D pris en charge (HDMI) Résolution Format d’image Fréquence V Fréquence H Fréquence pixel Structure 3D 720 × 480p 16:9 59,940/60,000 Hz 31,469/31,500 kHz 27,000/27,027 MHz Côte à côte (Entière) Côte à côte (moitié) Français Haut et Bas 720 × 576p 16:9 50,000 Hz 31,250 kHz 27,000 MHz Côte à côte (Entière) Côte à côte (moitié) Haut et Bas 1280 × 720p 16:9 59,940/60,000 Hz 90,0/89,91 kHz 148,352/148,500 MHz Séquentiel 44,955/45,000 kHz 74,176/74,250 MHz Côte à c
INFORMATIONS Format 3D pris en charge (DTV) Format vidéo Format d’image Fréquence V Structure 3D 480i, 480p 16:9 59,940/60,000 Hz Côte à côte (moitié) 576i, 576p 16:9 50,000 Hz Côte à côte (moitié) 720p 16:9 59,940/60,000 Hz Côte à côte (moitié) 50,000 Hz Côte à côte (moitié) 59,940/60,000 Hz Côte à côte (moitié) 50,000 Hz Côte à côte (moitié) 24,000 Hz Côte à côte (moitié) 30,000 Hz Côte à côte (moitié) 50,000 Hz Côte à côte (moitié) 59,940/60,000 Hz Côte à côte (moitié) Haut
INFORMATIONS Caractéristiques techniques et accessoires Consommation (approx.