WL76* Digital Series YL76* Digital Series EUROPEAN UNION ECOLABEL Awarded to goods or services which meet the environmental requirements of the EU ecolabelling scheme
English Contents CONTROLS AND FEATURES General controls ............................................ 27 Quick Menu ............................................ 27 Selecting positions ................................... 27 The Time Display – analogue only ........... 27 Stereo and Bilingual transmissions ............ 27 Using 3D functions ........................................ 28 Viewing 3D images .................................. 28 Switching display mode or selecting 3D format ........................
Common Interface ................................... 68 Software Upgrade and Licences ...................... 69 Auto Upgrade ......................................... 69 Searching for New Software ..................... 69 Network Upgrade .................................... 69 Software Licences .................................... 69 System Information and Reset TV .................... 70 System Information .................................. 70 Reset TV ..................................................
English INSTALLING YOUR TV Safety Precautions DO NOT REMOVE ANY FIXED COVERS AS THIS WILL EXPOSE DANGEROUS AND ‘LIVE’ PARTS. This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety.
INSTALLING YOUR TV English Installation and important information Where to install Locate the television away from direct sunlight and strong lights. Soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen. Fixing strap Sturdy tie (as short as possible) Stand clip Place the TV on a stable, level surface that can support the weight of the TV.
English INSTALLING YOUR TV When using the 3D glasses About handling the 3D glasses • Avoid use of the 3D function when under the influence of alcohol. • If you are ill or feel ill, you should refrain from viewing 3D images, and consult your health care provider as may be appropriate.
INSTALLING YOUR TV • Use the product in the following temperature range; otherwise, the quality of the 3D image or the reliability of the product cannot be guaranteed. - 3D glasses: 0°C - 40°C (32°F - 104°F) - TV: 0°C - 35°C (32°F - 95°F) • If you use a fluorescent light, it may flicker depending on the frequency of the light. In this case, reduce the brightness of the fluorescent light, or use another light. (It is not recommended to watch the TV in a dark room, especially for children.
English INSTALLING YOUR TV The remote control 17 To display the digital on-screen Programme Guide Simple at-a-glance reference of your remote control. 19 2 3 6 7 18 To exit menus To page up, down, left or right 20 When using menus, the arrows move the cursor on the screen up, down, left or right.
CONNECTING YOUR TV English Connecting external equipment Before connecting any external equipment, turn off all main power switches. If there is no switch, remove the mains plug from the wall socket.
English CONNECTING YOUR TV Bundling the cables Install the cable clamps, and put the cables in these.
CONNECTING YOUR TV To connect a DVI device The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI source device or uncompressed digital video from a DVI (Digital Visual Interface) source device. This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) programme material in digital form from EIA/CEA-861-D–compliant [1] consumer electronic devices (such as a set-top box or DVD player with HDMI or DVI output).
English CONNECTING YOUR TV REGZA-LINK connection You can control the basic functions of connected audio/video devices using the television’s remote control if you connect a REGZA-LINK compatible AV amplifier or playback device. For an explanation of setup and operations, see pages 75–76. the back of your television Playback device AV amplifier Playback device For the setup shown above, you will need three HDMI cables.
CONNECTING YOUR TV With either an RGB/PC or an HDMI connection, you can watch your computer’s display on the television and hear the sound from the television’s speakers. To connect a PC to the RGB/PC terminal When connecting a PC to the RGB/PC terminal on the television, use an analogue RGB (15-pin) computer cable and a PC audio cable for the PC/HDMI 2 (AUDIO) socket. Select PC from the PC/HDMI 2 Audio options in the AV Connection menu located in the PREFERENCES menu.
English CONNECTING YOUR TV Connecting a home network The LAN port allows your Toshiba TV to connect to your home network. You can use this revolutionary home entertainment networking system to access photo, video and audio files that are stored on a DLNA CERTIFIED™ server and play/display them on your TV. To connect the TV to a home network with an internet connection - Wireless Please refer to “Wireless Setup” section on page 43.
CONNECTING YOUR TV English Controls and input connections A wide variety of external equipment can be connected to the input sockets on the side of the television. Whilst all the necessary adjustments and controls for the television are made using the remote control, the buttons on the television may be used for some functions. USB 1 port Media Player POWER switch (Full Power Down Option) USB 2 port Photo Viewer COMMON INTERFACE The Common Interface is for a Conditional Access Module (CAM).
English SETTING UP YOUR TV Startup Application g Before switching on the television, put your decoder and media recorder, if applicable, to Standby. To set up the television, use the buttons on the remote control as detailed on page 8. TV Mounting If you are mounting the TV on a wall please select [Wall]. [Stand] is recommended for other uses. This setting may be modified later under Sound Navi in the SOUND menu. Stand Quick Setup a h Press the 1 button. The Menu Language screen will appear.
SETTING UP YOUR TV Auto Tuning Progress DTV Tune English You must allow the television to complete the search. If your satellite dish is movable, the following Positioning screen will appear. Found 3% 2 ATV Tune Positioning Waiting... Satellite : ASTRA 19.2°E Channel: C7 Transponder 1/83 (10743 MHz H) Go to 0 When the search is complete, the television will automatically select position one.
English SETTING UP YOUR TV DTV End Frequency: Ant/Cable/Satellite (if available) This sets the frequency at which the scan will end. From this menu, you can set the RF input configuration. a DTV Modulation: Press MENU, and select SETUP menu. You can choose from five QAM modulation settings. b Use b to highlight Ant/Cable/Satellite and use C or c to select Antenna, Cable or Satellite.
SETTING UP YOUR TV a b c c In the Satellite Settings menu, press B or b to highlight the satellite you want to delete. Press the RED button. A confirmation window will appear. Press C or c to select Yes and press OK. To edit the satellite settings: In the Satellite Settings menu, press B to highlight Switch Type. Press C or c to select None, ToneBurst, DiSEqC 2way or DiSEqC 4way as your satellite switch type. c Press b to highlight LNB Power and press C or c to select On or Off.
English SETTING UP YOUR TV To select the Dish Type: a a In the Satellite Settings menu, press B or b to highlight the required satellite line, and then press OK. b Press C or c to highlight Dish, and then press the GREEN button. Press MENU and use C or c to select SETUP menu. Use b to highlight Auto Tuning. Press OK.
SETTING UP YOUR TV English ATV Manual Tuning For Satellite Tuning: A screen will appear warning that previous programmes and settings will be deleted. Tuning Auto Tuning The television can be tuned-in manually using ATV Manual Tuning. For example, you might use the feature if the television cannot be connected to a media recorder/decoder with a SCART lead or when you want to tune-in a station on another System. Previous settings will be lost! Press EXIT for no change.
English SETTING UP YOUR TV a Press MENU and use C or c to select the SETUP menu. Press b to highlight ATV Manual Tuning and press OK to select. g h SETUP Menu Language English Country Germany Each signal will show on the television. If it is not your media recorder, press B or b again to restart the search. When your media recorder signal is found, press c to move along to Station. Use B, b, C and c to put in the required characters, e.g. VCR.
SETTING UP YOUR TV English c Press c to select Skip. DTV Manual Tuning d Use B or b to turn Skip on. Press OK. NOTE: The content of this menu varies depending on the DTV input (Antenna, Cable, or Satellite) that is currently selected. 8 on the screen indicates a skipped position. Manual Tuning ATV Manual Tuning This feature is available for service engineers or can be used for direct channel entry if the multiplex channel is known.
English SETTING UP YOUR TV DTV Settings Manual Tuning for DVB-C When Ant/Cable/Satellite is set to Cable, DTV Manual Tuning items are as follows: Channels (Antenna/Cable) Frequency – input a specific frequency to be scanned The channel order may be changed to suit your personal preference. Modulation – choose from one of five QAM modulation options Symbol Rate – input a specific baud rate (KS/s) to be used for the manual scan Highlight Start Scan, and then press OK.
SETTING UP YOUR TV Channels (Satellite) channel you wish to move and press OK to check. If you wish to move multiple channels at once, select another channel and check in the same way. Repeat as necessary. Once all desired channels have been checked, use the B or b buttons to place the focus at the position to which you wish to move the channels. The channels will be inserted above the highlighted channel. Press the GREEN button to execute the move. Channels Line No. 1/10 Pos.
English SETTING UP YOUR TV Group — Press C or c to select All or By Satellite. Dynamic Scan Sorting Type — Press C or c to set the sorting type. A-Z If the broadcast information has changed in your DVB-T receiving area, the TV screen will display the message “Broadcast information has changed. Would you like to rescan now?”. Please follow the message. If you do not wish for the TV to detect changes and prompt you to rescan, you should set this feature to “Off”.
CONTROLS AND FEATURES Selecting positions To select a position, use the numbered buttons on the remote control. Quick Menu Quick Menu helps you access some options quickly, such as Picture Mode, Picture Size, More Information, Sleep Timer etc. Positions can also be selected using PU and Pu. To display on-screen information such as position, input mode or stereo/mono signal, press . Press again to cancel. Press QUICK to display the Quick Menu and use B or b to select the option.
English CONTROLS AND FEATURES Using 3D functions 3D format select: Before using 3D programming, see and follow “When using the 3D glasses” section on page 6. If a right and left images are same in Native mode, select SBS. If a top and bottom images are same in Native mode, select TB. 3D formats are the following.
CONTROLS AND FEATURES To select 2D format from the Quick menu in 2D mode: a Press QUICK to display the Quick Menu. a Press QUICK to display the Quick Menu. b Press B or b to select 3D Settings and press OK. b Press B or b to select 3D Settings and press OK. c Press B or b to select 3D Format Select and press OK. c Press B or b to select 2D Format Select and press OK. d Press C or c to select Side by Side or Top and Bottom. d Press C or c to select 2D (SBS) or 2D (TB).
English CONTROLS AND FEATURES To change or delete your PIN code: Setting the auto start mode a In the PREFERENCES menu, press B or b to select 3D Setup, and then press OK. Press MENU and C or c to select the PREFERENCES menu. b Press B or b to select 3D PIN. Press B or b to select 3D Setup and press OK. c Controls what the TV does when it detects a 3D signal.
CONTROLS AND FEATURES Setting Enable 3D Timer When this feature is set to On, you must enter 3D PIN code for changing display mode. This feature helps to remind you not to watch 3D video for extended periods of time. Once a set period of time has passed, a dialogue will be shown asking you if you wish to continue viewing or not. a In the PREFERENCES menu, press B or b to select 3D Setup, and then press OK. b Press B or b to select 3D Safety Settings and press OK.
English CONTROLS AND FEATURES Sound controls c Press b to highlight Sound Navi, and then press OK. Advanced Sound Settings Volume controls and sound mute Sound Navi Surround Volume Press y or Y to adjust the volume. Sound Mute Press once to turn the sound off and again to cancel. a Press MENU and C or c to select the SOUND menu. b Press b to highlight Dual, and then press C or c to choose between Dual 1 or Dual 2.
CONTROLS AND FEATURES Press b to highlight Voice Enhancement, and then press C or c to select On. d Press b to highlight Dynamic Bass Boost and using C or c select the desired bass expansion level (Off, Low or High). d Audio Level Offset Dolby Volume ® In the SOUND menu, press b to highlight Dolby Volume. b Press C or c to select Low, High or Off. NOTE: • The Dolby Volume setting influences the Dynamic Range Control and Digital Audio Output settings.
English CONTROLS AND FEATURES Widescreen viewing Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats. WIDE 4:3 Use this setting when watching a widescreen DVD, widescreen video tape or a 16:9 broadcast (when available). Due to the range of widescreen formats (16:9, 14:9, 20:9 etc.) black bars may be visible on the top and bottom of the screen. Use this setting to view a true 4:3 broadcast.
CONTROLS AND FEATURES English NATIVE This setting will show the picture without overscan, i.e. WYSIWYG. PC NORMAL This setting will show the picture without overscan, i.e. WYSIWYG. This option is only available when watching a PC signal source via HDMI or PC terminal. PC WIDE This setting will show the picture without overscan or side panels. This option is only available when watching a PC signal source via HDMI or PC terminal. Dot by Dot Press the “Dot by Dot” is a non-scaling display.
English CONTROLS AND FEATURES Picture controls Picture preferences You can customize current picture mode settings as desired. For example, while selecting “Dynamic”, if you change the following items, such as Backlight, Contrast, Brightness, Colour, Tint, Sharpness and the Advanced Picture Settings items, your new settings are saved for “Dynamic” picture mode. Most of the picture controls and functions are available in both digital and analogue modes.
CONTROLS AND FEATURES Auto Brightness Sensor Settings The Base Colour Adjustment feature allows the adjustment of individual colours to suit personal preference. This can be useful when using an external source. When the Auto Brightness Sensor is activated, it will automatically optimise the backlighting levels to suit ambient light conditions. a In the Advanced Picture Settings menu, press b to select Base Colour Adjustment, and then press OK.
English CONTROLS AND FEATURES Active Backlight Control DNR – Digital Noise Reduction When Active Backlight Control is activated, it will automatically optimize the backlighting levels for dark scenes. DNR allows you to ‘soften’ the screen representation of a weak signal to reduce the noise effect. a In the Advanced Picture Settings menu, press b to select Active Backlight Control. a b Press C or c to select On or Off. b Black/White Level Select DNR from the Noise Reduction menu.
CONTROLS AND FEATURES The Film Stabilization feature allows the adjustment of motion smoothness. a In the Advanced Picture Settings menu, press b to select Film Stabilization. b Press C or c to select High, Middle, Standard or Off. e White Balance-Window Display This feature displays a special Window Pattern to be used when adjusting white balance with a measuring device. a In the Expert Picture Settings menu, press B or b to select White Balance, and then press OK.
English CONTROLS AND FEATURES White Balance-Copy to All Inputs Automatic Format (Widescreen) This feature copies White Balance on the current input to all other inputs that are set to the same picture mode. Individual settings that are not allowed for a specific input will not be copied. When this television receives a true Widescreen picture and Auto format is On, it will automatically be displayed in Widescreen format irrespective of the television’s previous setting.
CONTROLS AND FEATURES English Picture Position The picture position may be adjusted to suit personal preference and can be particularly useful for external inputs. a b In the PREFERENCES menu, highlight Display Settings and press OK. In the Display Settings menu, highlight Picture Position. Display Settings Auto Format On 4:3 Stretch Off Picture Position c d Press OK to view the options available for the picture format that has been selected.
English CONTROLS AND FEATURES Using your home network When using the TV under wireless LAN environment: This TV is a DLNA CERTIFIED™ Player and Renderer. This TV can play digital content stored on a DLNA CERTIFIED™ product with server function. If you want to use this TV as a DLNA CERTIFIED™ Player or Renderer, you will have to configure the network on your TV (see page 14). If you want to use your home network, you will have to configure the network on your TV.
CONTROLS AND FEATURES Easy Setup using PBC (Push Button Configuration) a You can select the Network Type. a In the PREFERENCES menu, highlight Network Setup and press OK. PREFERENCES 3D Setup b Press B or b to highlight Wireless Setup, and press OK. c Press B or b to highlight Easy Setup, and press OK.
English CONTROLS AND FEATURES To cancel searching for the AP: e Press RETURN while searching for the AP. A message will appear; then, press C or c to select Yes and press OK. Assisted Setup a b In the PREFERENCES menu, highlight Network Setup and press OK. f Press B or b to highlight Authentication, and then press C or c to select Open System, Shared Key, WPA-PSK or WPA2-PSK. g Press B or b to highlight Encryption, and then press C or c to select None, WEP, TKIP or AES.
CONTROLS AND FEATURES The settings configured in Wireless Setup can be confirmed. a Press QUICK to open the Quick Menu. NOTE: Even if an AP for IEEE 802.11n is used when Encryption is set to WEP or TKIP, the Speed value might be low. It is recommended that Encryption be changed to AES (see “Manual Setup” on see page 44). Notes on wireless LAN environment: b Press B or b to select Wireless Information and press OK.
English CONTROLS AND FEATURES d Highlight Auto Setup, and then press C or c to select On. NOTE: If you manually set the IP address, you must not use the same IP address for any other device. The IP address you use should be a private address. IP Address Setup Auto Setup DNS Setup On IP Address 133 . 177 . 108 . 157 Subnet Mask 255 . 255 . 255 . 0 Default Gateway . . . NOTE: Other items will be grayed out when Auto Setup is set to On.
CONTROLS AND FEATURES Press B or b to highlight Secondary DNS Address, and edit in the same way as Primary DNS Address. MAC Address You can view the fixed MAC address for the TV and for the Dual Band WLAN Adaptor, if one is installed. a Using the software keyboard You can enter text by using the Software Keyboard. The Software Keyboard window will appear when you press OK on a field that accepts character input.
English CONTROLS AND FEATURES Setting up the Media Renderer feature h NOTE: The Web Password can be up to 15 characters long. Terminology: DMS: DLNA CERTIFIED™ Server i DMR: DLNA CERTIFIED™ Renderer j DMC: DLNA CERTIFIED™ Controller The TV can be configured as a DMR. When operating as a DMR, the TV displays content provided by a DMS. The selection of the media is done by the DMC - the TV does not select the input. The TV can play photo, movie, or audio files when operating as a DMR.
CONTROLS AND FEATURES Maximum Volume Setup This setup determines the password that is necessary for the DMC to access built-in web pages on the DMR. This feature allows you to set the maximum volume of the TV when it receives volume operation commands from a DMC. a b In the Media Renderer Setup menu, highlight Web Password Setup, and press OK. Highlight the Password field and press OK. The Software Keyboard window will appear.
English CONTROLS AND FEATURES Using YouTube™ Using the Function Menu The Function Menu provides easy access to functions that are commonly used. YouTube is a video-sharing service managed by YouTube, LLC. This TV allows you to view YouTube content. a Press the BLUE button while displaying YouTube. NOTE: • You need to configure a home network before using this feature (see page 14).
CONTROLS AND FEATURES If you select Advanced Settings: a Press B or b to select Pointer: ON, and press OK. a b Press the BLUE button. Press B, b, C or c to select the setting items, and press OK. A check will appear in the box. To remove the check, press OK again. b Press B, b, C or c to select OK field, and press OK. c From the Function menu, press C or c to select Pointer, and then press OK. d Press B or b to select Drag Mode, and press OK. • e f Item Image will appear.
English CONTROLS AND FEATURES Item Security Cookies Using the Media Player Settings When jumping from a protected page to an unprotected page, the message is displayed when the check is applied to Notify of secure/non-secure page changes. Apply the check to select SSL version from SSL Version to use (SSL2.0, SSL3.0, TSL1.0). A content confirmation of the certification and a setting effect/non-effect can be done in Root Certificates and CA Certificates shown below.
CONTROLS AND FEATURES a Using Media Player with USB When Auto Start is enabled, you will be asked if you want to start the Media Player whenever a USB device is inserted. If Auto Start is disabled (or if you want to connect to a DMS on the network), you must manually start the Media Player from the menu. b c To change the Auto Start setting: a b Press MENU and C or c to select the APPLICATIONS menu. Insert USB device into the USB socket on the right side of the TV.
English CONTROLS AND FEATURES To select a file in the list of contents: a b Viewing photo files Press B or b to select a file or folder. There are three types of viewing modes. Multi View Press OK to move to the next layer, or press RETURN to return to the previous layer. This view allows you to search for photos in a grid format. The pictures are displayed using thumbnail data in each image file. To close the Media Player: a Photo Press EXIT.
CONTROLS AND FEATURES c In this mode, only files located in the selected directory will be displayed. This view allows you to change the photo content manually. When moving from Multi View to Single View, the currently selected photo will be displayed. a Press c to view the next photo. Press C to view the previous photo. b Press B to rotate the image 90° clockwise. Press b to rotate the image 90° counterclockwise. c Press C or c to select Title/File Name, New or Old to set the sorting rule.
English CONTROLS AND FEATURES NOTE: If you change the structure or modify any of the folder or file names under the “PRIVATE” folder, the list display as well as movie playback may not function correctly. Viewing movie files (on a DLNA CERTIFIED™ Server or USB device) You can select movies from a list of available files.
CONTROLS AND FEATURES To register your TV to a DivX® account a Press QUICK to open the Quick Menu in list mode. b Press B or b to select Sort. This TV allows you to play back files purchased or rented from DivX® Video-On Demand (VOD) services. When you purchase or rent DivX® VOD files on the internet, you will be asked to enter a registration code. c Press C or c to select Title/File Name, New or Old to set the sorting rule.
English CONTROLS AND FEATURES To set the repeat mode: Playing music files (on a DLNA CERTIFIED™ Server or USB device) You can listen to music from a list of available files. a Press QUICK to open the Quick Menu. b Press C or c to select Off, All or 1. Music list example Mode Music /Folder Sort: Title Total Time Music 1 USB: Files in the same folder are played back once. DMS: A file is played back once. All Files in the same folder are repeatedly played back.
CONTROLS AND FEATURES a Press QUICK to open the Quick Menu in list mode. b Press B or b to select Device Information. NOTE: When the music files on the USB device are used, or the TV is used as a DMR, this feature is not available. To display the file status information a b again to remove the information. NOTE: The information may not be correctly displayed depending on the content, DMC or DMS. To close the Music Player: a You can use the TV screen as a digital photo frame.
English CONTROLS AND FEATURES c c Press c to select Start, and then press OK to open Photo Frame. Press B b C c to select the photo you want to copy from the USB storage device or DLNA CERTIFIED™ server to the TV’s flash memory, and then press OK. Photo Select /Folder 1/54 E05265464.jpg 06:36 Tue, 26 Apr 1920 x 1080 OK Select P Page RETURN Back To open from the Quick Menu Photo Edit a Press QUICK to open the Quick Menu. a Press B or b to select Photo Edit, and then press OK.
CONTROLS AND FEATURES English Other features Settings a Press B or b to select Settings, and then press OK. b Press B or b to select Clock, Position or Auto Power Off. Panel Lock Panel Lock disables the buttons on the television. All buttons on the remote control can still be used. a Settings --/-- (---) -- 10:10 In the PREFERENCES menu, select Panel Lock and choose On or Off using C or c.
English CONTROLS AND FEATURES The timers On Timer Programme Timers – digital only This feature will set the television to go to a specific channel at a certain time. It can be used to view a particular programme, or by setting the mode to daily or weekly, can be used to view a series of programmes. a Press MENU and C or c to select the APPLICATIONS menu. b Press b to select Programme Timers, and then press OK.
CONTROLS AND FEATURES The television can be set to turn itself Off after a certain length of time. a b c In the APPLICATIONS menu, press b to select Sleep Timer. Use the number buttons to set the desired time. For example, to switch the television off in one and a half hours enter 01:30, or press c/C to increase/ decrease in steps of 10 minutes. (Maximum time setting is 12 hours) Press EXIT to finish. To cancel the Sleep Timer, enter all zeros for the above setting.
English CONTROLS AND FEATURES Digital on-screen information and Programme Guide e When viewing in digital mode, the on-screen information and programme guide provide access to programme details for all available channels. To display More Information a b Information a Press , the information screen will appear giving details of the channel and programme currently being viewed. 8888 D+ ITV1 London ASTRA 19.2˚E Press b to select Also.
CONTROLS AND FEATURES a Genre selection/searching Select the on-screen guide by pressing GUIDE, and the guide screen will appear highlighting details of the channel and programme currently being viewed. This may take a few moments to appear. TV 6 M6 18:00 18:30 19:00 19:30 09 LES SIM... 33 LES SIM... 06 TOP MODEL 09 LES SIMPSON 10 SUMMERLAND 53 SUMMERLAND 9 W9 11 NT1 a b 10:50 Tue, 6 Apr Thu6 From the guide screen, you can use the genre selection and search features.
English CONTROLS AND FEATURES Digital settings – parental control Parental Setup In order to prevent viewing of unsuitable films and programmes, channels and menus can be locked in digital mode. They can then only be accessed with a security code PIN. Setting the PIN a Press MENU and c to select the SETUP menu. b Use b to select DTV Settings, and then press OK. The Parental Control feature allows you to block programmes according to their rating levels.
CONTROLS AND FEATURES English Digital settings – Channel Options Skip channels This feature allows you to set channels that will be skipped when Pu or PU are used to tune. Selecting favourite channels a Favourite Channels creates a list of the digital channels that are watched most. Four lists can be created, they can be a mixture of television, radio and text channels. b From the Quick Menu, press b to select Channel Options and press OK. c Press c repeatedly to highlight the skip (8) box.
English CONTROLS AND FEATURES Digital settings – other settings Common Interface The Common Interface Slot, situated on the side of the television, enables the insertion of a CAM (Conditional Access Module) and card. These are purchased from a service provider and allow additional subscription broadcasts to be viewed. For information, see a service provider. Subtitles In digital mode, this feature will show subtitles on the screen in the selected language provided they are being broadcast.
CONTROLS AND FEATURES Network Upgrade TOSHIBA may offer upgrades for the TV’s software in the future. The TV’s software is upgraded via the Network. Before downloading software; Auto Upgrade Configure your TV to connect to the Internet. When Auto Upgrade is set to On, the television will automatically upgrade while in standby if new software is available. a From the SETUP menu, press B or b to select Software Upgrade and press OK. b Press B or b to select Over-the-air Upgrade and press OK.
English CONTROLS AND FEATURES System Information and Reset TV PC Settings Horizontal and Vertical Position System Information Connect the PC (as shown in the ‘Connecting a computer’ section) and ensure that a picture is showing on the television screen. The picture position may now be adjusted to suit personal preference. This feature can be used to check the version of software currently installed.
CONTROLS AND FEATURES Adjusting the Sampling Clock alters the number of pulses per scan, this will clear vertical lines on the screen. a Input selection and AV connections See page 9 for a detailed image showing recommended connections. In the Display Settings menu, press b until PC Settings is highlighted. b Press OK to select, and then b to highlight Sampling Clock. c Use C or c to adjust until the picture clears.
English CONTROLS AND FEATURES External input skip Labeling video input sources This feature is designed to make input selection more convenient by allowing you to skip unused inputs. These input labels are shown in the input selector. You can label video inputs according to the devices you have connected to the TV. a In the PREFERENCES menu, press b to highlight AV Connection. PREFERENCES Network Setup a In the PREFERENCES menu, press b to highlight AV Connection and press OK.
CONTROLS AND FEATURES English PC Audio HDMI Settings In order to receive sound from a connected PC, plug the audio cable into the back of the television (as shown in the ‘Connecting a computer’ section), and then use the PC/HDMI 2 Audio setting. Some early HDMI equipment may not work properly with your HDMI TV. Please try setting the Enable Content Type and INSTAPORT™ options to Off. Adjusting these settings should allow your early HDMI source to operate properly with your television.
English CONTROLS AND FEATURES Digital Audio Output When connecting a surround sound amplifier to the digital audio output (Sony/Philips Digital Interface Format [S/PDIF]), the following options can be selected. PCM: this mode outputs PCM format to the digital audio output socket. Auto: this mode outputs Dolby Digital (if available) or PCM to the digital audio output socket.
CONTROLS AND FEATURES Amplifier Control When Amplifier Control is set to On, it allows the “Speaker Preference” feature to become available. This is a new feature that uses CEC technology and allows you to control Toshiba REGZA-LINK compatible devices from the television remote control via HDMI connection (page 12). When the Enable REGZA-LINK item in the REGZA-LINK Setup menu is set to On, individual functions also set to On will be activated.
English CONTROLS AND FEATURES NOTE: • These functions depend on the device connected. • If you select the REGZA-LINK input source from the popup window, some REGZA-LINK devices may automatically turn on. • When the television is switched on it will take a few minutes for the REGZA-LINK icon to appear in the list. When an HDMI cable is removed, it will take a few minutes for the icon to disappear.
TEXT SERVICES Navigating pages using Auto This television has a multi-page text memory, which takes a few moments to load. It offers two Modes of viewing text – Auto will display Fastext, if available. LIST will save your four favourite pages. If Fastext is available, four coloured titles will appear at the base of the screen. To access one of the four given subjects, press the relevant coloured button on the remote control.
English TEXT SERVICES Control buttons Below is a guide to the functions of the remote control text buttons. k To display the index/initial page: Press k to access the index/initial page. The one displayed is dependant on the broadcaster. TEXT To display a page of text: Press TEXT to display text. Press again to superimpose text over a normal picture. Press again to return to normal television viewing. Channels cannot be changed until this has been done.
PROBLEM SOLVING Q A Below are the answers to some of the most common queries. Q A Q A Why is there no sound or picture? a Check the television is not in standby mode. Check the mains plug and all mains connections. b There is a picture, but why is there little or no colour? Country Colour System b Q A Q A Select the ATV Manual Tuning menu. Highlight the station and press OK. Then press c to select Manual Fine Tuning. Using B or b adjust to get the best picture and sound. Press OK and then EXIT.
English PROBLEM SOLVING Q A Q A Q A What is DVB-T? Digital Video Broadcasting Satellite/ETSI EN300 421 and Digital Video Broadcasting Satellite/ETSI EN302 307 via a satellite dish. a Set the Colour to Auto and exit. Q A Q A How are radio channels selected? b Go to the PICTURE menu and adjust the tint. Q A Q A Q A Q A Digital Video Broadcast via an aerial/antenna.
PROBLEM SOLVING Why doesn't the wireless network work? Q A Why doesn't the Media Player feature operate? Q A What do the LEDs on the front of the television indicate? Q A Make sure the TOSHIBA Dual Band WLAN Adaptor is used (see page 14). Check that the AP is powered on. Why doesn't the 3D feature operate correctly? If 3D images are not correct, the 3D format may be different, change the 3D format from Quick menu.
English INFORMATION License Information • This product achieved the European Eco label award issued by the European Commission. You can get more information in following link: http://ec.europa.eu/environment/ecolabel/ • Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are registered trademarks of Dolby Laboratories. • HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC.
INFORMATION English Cleaning the screen and cabinet… Turn off the power, clean the screen and cabinet with a soft, dry cloth. We recommend that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage. Disposal… The following information is only for EU-member states: Disposal of products The crossed out wheeled dust bin symbol indicates that products must be collected and disposed of separately from household waste.
English INFORMATION Information Before connecting any external equipment, turn off all main power switches. If there is no switch, remove the mains plug from the wall socket. Signal information for Mini D-sub 15 pin connector Pin No. Signal name Pin No. Signal name Pin No.
INFORMATION The HDMI inputs on this TV only accept VGA, SVGA, XGA, WXGA, and SXGA signal formats which are compliant with VESA as shown in the table below. Since some PCs and HDMI or DVI devices input signals which are different from the resolution and frequency described in the table below, the following phenomenon may occur; incorrect display, false format detection, picture position failure, blur, or judder.
English INFORMATION USB Media Player Supported Format Photo Extension Format .jpg, .jpeg JPEG Data compatibility: JPEG Exif ver 2.2 Maximum viewable resolution: 4096 x 4096 (HW decode) pixels 16384 x 16384 (SW decode) pixels Maximum file size: 9MB Maximum number of files: 2000/folder Movie Extension System Video Codecs Audio Codecs .mts, .m2ts AVCHD (MPEG-2 TS) MPEG-4 AVC/H.264 Dolby Digital (AC-3) PCM .divx, .div, .
INFORMATION English Acceptable signal formats for 3D Resolution Aspect ratio V. Frequency H. Frequency Pixel Clock Frequency 3D Structure 720 × 480p 16:9 59.940/60Hz 31.469/31.50Hz 27.000/27.027MHz Side by Side (Full)* Side by Side (Half) Top and Bottom 1280 × 720p 16:9 59.940/60Hz 90.0/89.91Hz 148.352/148.500MHz Frame Packing 44.955/45.000Hz 74.176/74.250MHz Side by Side (Half) Side by Side (Half) Top and Bottom 1920 × 1080i 16:9 59.940/60Hz 33.716/33.750Hz 74.176/74.
English INFORMATION Specifications and accessories Receiving systems DVB-T Broadcast systems/channels Broadcast systems/channels UK UHF 21-68 PAL-I UHF UK21-UK69 France VHF 05-10 (VHF 01-05) PAL-B/G UHF E21-E69 UHF 21-69 VHF E2-E12, S1-S41 Germany VHF 05-12 SECAM-L UHF F21-F69 UHF 21-69 VHF F1-F10, B-Q Austria VHF 05-12 SECAM-D/K UHF R21-R69 UHF 21-69 VHF R1-R12 Switzerland VHF 05-12 UHF 21-69 Italy VHF 05-12 (D,E,F,G,H,H1,H2) UHF 21-69 Spain UHF 21-69 Nederlands VHF 05-12 UHF 21-69 Greece VHF 05-12 UHF 2
INFORMATION 89 English For your own records
English INFORMATION Better for the environment... ●This TV has been verified to have high energy efficiency. ●The design of this TV has been done to reduce its impact through the use of materials and energy in its life cycle. This will reduce the CO2 emissions from its manufacture, use and end of life treatment. ●This TV has been designed to facilitate repair and recycling. ...better for you.
