Manual

Adding and erasing channels manually
After you have programmed the channels automatically, you can
manually add or erase specific channels.
"lb acid or erase channels:
1. Select the channel you want to add or erase. If you are adding a
channel, you must select the channel using the Channel Number
buttons.
2. Press MENU, and then press _ or • until the SET UP menu
appears.
3. Press • or • to highlight ADD/ERASE.
@@@©@®
SET UP
LANGUAGE ENGLISH
OLOCK SET 00:00
ANT1/2 ANT1
TV/CABLE CABLE
4. Press _ or • to select ADD or ERASE, depending on which
function you want to perform.
5. Press • to add (or erase) the channel.
6. Repeat steps 1-5 for other channels you want to add or erase.
Changing channels
_lb change to the next programmed channel:
Press Channel • or • on the TV or remote control.
"lb change to a specific programmed channel:
Press and hold Channel • or • for about one second. The TV
will enter the channel surf mode.
TV Front Panel
,I,V, I_
,_ c._ _xrr Tv_o T_.FOCUS
MENU Channel AV
AV
Upper channels
t
-- Current channel
Lower channels
Channel label (if set)
Repeatedly press or hold Channel • or • while the channel surf
mode is on-screen to scroll the channel list. Release the button to
display the highlighted channel.
"lb change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0-9 and 100).
For channels 100 and higher, press the 100 button, and then the
next two numbers. For example, to select channel 125, press
100,2, 5.