Manual

Unlocking programs temporarily
1. If you try to watch a TV program that exceeds the set rating
limits, the TV enters program lock mode. After 4 seconds, the
TV starts the favorite channel search function (see page 30). You
can either unlock the program temporarily (see steps 2-4) or
select a non-locked program to watch.
After 4 seconds
THIS PROGRAM HAS BEEN BLOCKED!
TVq3G • V
EXCEEDS SET LIMITS
CABLE 9
=I,
2. "lb temporarily unlock the program, press MUTE.
3. Press the Number buttons (0-9) to enter your 4-digit PIN code.
BLOCKING ACTIVE
ENTER PIN CODE
TO TEMPORARILY UN--BLOCK
0--9:TO SELECT ENTER:TO SET
4. Press ENTER.
If the correct code is entered, the program lock mode is released
and the normal picture appears.
All locking is disabled until the TV is turned off, and will be
enabled when the TV is turned on again.
Locking channels
With the CH LOCK feature, you can lock specific channels. The TV
will not be able to tune locked channels with the Channel • •
buttons or Channel Number buttons unless you clear the setting.
You can lock a maximum of nine channels.
"lb lock channels:
1. From the LOCKS menu, select CH LOCK. CH INPUT will be
highlighted.
2. Press _ or • to display the CH LOCK menu.
3. Press the Channel Number buttons to enter the channel you
want to lock. (The channel you are currently watching cannot be
locked.)
4. Press ENTER.
@@@©@@
LOCKS
V-_HIP
ENABLEBLOCKING OFF
TV RATING
MPAARATING
TV CAB_E
CLEAR ALL )
@@@©®@
LOCKS
V-4DN I P
ENABLEBLOCKI NG OFF
TV RAT I NG )'
TV CAB_E
CLEAR ALL )
5. Repeat steps 3 and 4 for other channels.
(_) MUTE
Channel
Number
LOCKS menu
@@@©@@
LOCKS
V-CHIP
ENABLE BLOCKING ON
TV RATING
MPAA RATING
FRONT PANEL LOCK OFF
N_ PIN CODE
"lb select each item:
Press • or •.