Manual

press ENTER.
@@@©@@
LOCKS
V--C HI P
ENABLEBLOCK ING ON
TV RATING 1'
MPAA RAT I NG
P
H INPUT _;_;_
.... OLOO.... _ _
FRONT PANEL LOCK 33
NEW'PIN CODE 0 0 0
TV CAB_ E
CLEAR ALL )'
@@@@@@
LOCKS
V-43 HI P
ENABLEBLOCK I NG ON
TV RATI NG )"
MPAA RATI NG
).
H INPUT _X
.... CLOCK 102 18 33
FRONT PANEL LOCK
NEVV PI N CODE 0 0 0
TV CAB[ E
CLEAR ALL )
4. Repeat step 3 for other channels.
"lb clear all locked channels at once:
1. Press • or • to highlight CLEAR ALL, and then press • or 4.
@@@@@@
LOCKS
V--C HI P
ENABLEBLOCK ING ON
TV RATING )'
MPAA RAT I NG
P
OH X_
INPUT
Vl DEC LOCK 0
FRONT PANEL LOCK
..... CODE °o o o
Locking video inputs
With the VIDEO LOCK feature, you can lock out the input sources
(Video 1, Video 2, Video 3, ColorStream HD1, ColorStream HD2)
and channels 3 and 4.
You will not be able to select the input sources with the TV/VIDEO
button or Channel buttons unless you clear the setting.
"lb set up the video lock:
1. From the LOCKS menu, select VIDEO LOCK.
2. Press _ or • to highlight the level of video locking you want
(Video, Video+, or Off), as follows:
VIDEO : Locks Video 1, Video 2, Video 3, ColorStream HD1
and HD2.
VIDEO+ :
Locks Video 1, Video 2, Video 3, ColorStream,
HD1/HD2, and channels 3 and 4. This option
should be used if you use the antenna terminal to play
a video tape.
Note: Make sure the POP is not on channel 3 or 4.
OFF : Unlocks all video input sources.
@@@@@@
LOCKS
V--OH IP
ENABLE BLOCK I NG ON
TV RATING I,,
MPAA RATI NG
BLOCK I NG OPTI ON I_.
NEW P I N CODE
UGHT RECALL POWER
;;; ®@@
__LE...... _,....._.....
® ® @
® ®
® ® U
ENTER