Specifications

32
CONTROLS AND FEATURES
English
Setting up the Network
You can select the Network Type.
a In the PREFERENCES menu, highlight Network
Setup and press OK.
b Press B or b to highlight Network Type, and then
press
C or c to select Wired or Wireless.
NOTE: If the Dual Band WLAN Adaptor is not
connected, Wireless cannot be selected.
c If you selected Wired, see “Advanced Network Setup”
on page 34.
NOTE:
• This feature is grayed out when the Dual Band WLAN
Adaptor is not connected or Network Type is set to Wired.
• Continued connection of AP (Access Point) is not guaranteed.
The connection may be disconnected while watching TV.
• Do not remove the Dual Band WLAN Adaptor when
Network Type is set to Wireless or wireless
communication is active.
There are 3 methods for Wireless Setup:
Easy Setup (WPS)
If the AP supports WPS, this method can be used.
• WPS is an industry standard designed to make connection
of wireless LAN equipment and security setup easy. WPS
will automatically configure all wireless settings.
Assisted Setup (setup by using the AP’s notification
information)
Network Name, Authentication, and Encryption are decided
based on information from the AP. You will manually set the
Security Key.
Manual Setup (manual input of all settings)
Easy Setup using PBC (Push Button Configuration)
a In the PREFERENCES menu, highlight Network
Setup and press OK.
b Press B or b to highlight Wireless Setup, and press
OK.
c Press B or b to highlight Easy Setup, and press OK.
d Press C or c to select PBC.
e Press b to highlight Start Scan, and press OK.
f Following the on-screen instructions, push the
appropriate button on your AP.
g When a window reporting that the setup is complete
appears, press OK.
To cancel searching for the AP:
Press RETURN while searching for the AP. A message
will appear, and then press C or c to select Yes and
press
OK.
Easy Setup using PIN (Personal Identification
Number)
a In the PREFERENCES menu, highlight Network
Setup and press OK.
b Press B or b to highlight Wireless Setup, and press
OK.
c Press B or b to highlight Easy Setup, and press OK.
d Press C or c to select PIN.
e Press b to highlight Start Scan, and press OK.
f Press B or b to select the desired AP and press OK.
NOTE: Check the MAC address on the label of the AP
or in the manual, and select your AP.
g When the PIN code window appears, enter the
displayed PIN into your AP, and then press Next to
continue the PIN Setup. When a message displays to
report that the setup is complete, press OK.
Wireless Setup
Network Setup
Media Renderer Setup
Display Settings
Network Lock
Photo Frame Setup
REGZA-LINK Setup
Teletext Auto
Panel Lock Off
PREFERENCES
Network Type Wired
Network Connection Test
Advanced Network Setup
Network Setup
Wireless Setup
Easy Setup On
Enhanced 11n Off
Manual Setup
Wireless Setup
Assisted Setup