o Leading Innovatuon >_
Dear Customer, Thank you for purchasing this Toshiba LCD TV. This manual will help you use the many exciting features of your new LCD TV. Before operating your LOB iV, please read this manual completely, and keep it nearby for future reference. Safety Precautions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
• ALWAYS contact a service technician to inspect -IV any time it has been damaged or dropped. Important Safety Instructions 1) 2) Read these Keep these 3) 4) Heed all warnings. Follow all instructions. 5) Do not use this 6) Clean 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) instructions.
Care 25) Never block or cover the slots or openings in the TV cabinet back, bottom, and sides. Never place the TV: For better performance and safer operation of your TOSHIBA TV, follow these recommendations and precautions: • on a bed, sofa, rug, or similar surface; • too close to drapes, walls; or curtains, 32) If you use the TV in a room whose temperature is 32 °F (0 °C) or below, the picture brightness may vary until the LCD warms up. This is not a sign of malfunction.
Service 41) _ To Display your LCDTV usinga Wall Bracket: WARNING: RISK OF ELECTRIC SHOCK! Never attempt to service the TV yourself. Opening and removing the covers may expose you to dangerous voltage or other hazards. Failure to follow this WARNING may result in death or serious injury. Refer all servicing not specified in this manual to a Toshiba Authorized Service Center. 42) If you have the TV serviced: • Ask the service technician to use only replacement parts specified by the manufacturer.
FCCDeclarationof Conformi ComplianceStatement{.Part15): The Toshiba 42ZV650U, 47ZV650U and 55ZV650U Televisions comply with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The party responsible for compliance to these rules is: Toshiba America Consumer Products, L.L.C. 82 Totowa Rd. Wayne, NJ 07470.
Contents ImportantSafety Instructions ...................... 3 Installation, Care, and Service ..................... 3 Choosinga location for your LCDTV ................. 5 Chapter1: Introduction........................... 9 Features Overview of your new TV .......................... of steps for installing, setting and using your TV front and side TV back panel 9 up, new TV ......................... panel controls and connections connections .... ........................
Other REGZA-LINK c_functions ................. REGZA-LINK ® PC Link ........................ 60 60 Using the HDMI settings feature ................... Setting the HDMI audio mode ..................... Displaying TV status information .................. Understanding the auto power off feature .......... Understanding the last mode memory feature ....... 61 61 62 62 62 Chapter 7: Using the TV's advanced features ............ Using the advanced picture settings features ........ Using Resolution+ jM......
Features of yournew TV The following are just a few of the many exciting features of your new Toshiba widescreen, integrated HD, LCD TV: • Integrated digital tuning (8VSB ATSC and QAM) eliminates the need for a separate digital converter set-top box (in most cases). • 1080p output resolution. • Four HDMI _" digital, interfaces with 1080p • HDMI capabilities high-definition input support multimedia (_ page 16).
i!i!%!?ii__{i!iF _:{_"!{ ! ¸:{¸¸2¸ !!!!ii!_!i;{_iF ¸__:!iii{ii:; ¸ _: _!i f_:b!_!Jiii!ii{i !{!i!_{;{i!iiiili !iiii:{!ii::{i! i;_! % i!_F!!_:{{!:i!!{_ 'i_i: !i!?_ iii!!!{{i!{{ilili!{{i:i,S {!i!iiii!i i!:i:i1211:i!:!ii !i: !¸!¸¸¸ !fi!ii_!{!!i_iii! _iiii!i!iii{i!{i_!i !:i!::¸::{!¸i¸¸:iii¸¸¸¸!:! fi!! if!i¸¸¸¸¸_¸V¸!¸!¸¸!{!_i_{d !!!:i_i !ilii_ii!i!il !!if! ii{i!_!{? _I¸¸¸¸¸ ?_!ii{iiii:!!i {!ii!i _i!i ili{!i{i!_? ¸i;i:¸¸!¸i;!¸¸¸IS¸¸¸¸i_i¸¸¸¸_¸ ¸¸¸¸¸¸_ ¸¸¸¸¸!! _!!i{!i_ill Chapter 1:Introduction TV front and side
TV back panel connections For an explanation of cable types and connections, see pages 12-19. TV back -- HDMI IN I-1_1313! 1 1----+- 2 IN IN 3 IN PC IN 6 Power cord --Cable Strap ,\ 2 3 4 5 E 9 1 2 HDMI TM IN-High-Definition Multimedia Interface input receives digital audio and uncompressed digital video from an HDMI device or uncompressed digital video from a DVI device. Also see item 6. HDMI connection is necessary to receive 1080p signals.
Overviewof cable types Cables can be purchased from most stores that sell audio/video devices. Before purchasing any cables, be sure of connector types required by your devices and the length of each cable. Coaxial(F-type) cable Coaxial (F-type) cable is used for connecting your antenna, cable TV service, and/or cable converter box to the ANT/CABlE input on your TV. HDMI" cable (with HDMILogo"H-"lrrlll,,) HDMI (High-Definition Multimedia Interface) cable is for use with devices with an HDMI output.
Connectinga VCR(or a VCRwith S-video)and antenna, Cable TV or Camcorder From Cable TV or antenna Camc0rder FromCableTV Cable TV upperback panel N IN IN IN I VIDEO 2 inputs on TV rightside panel , I© ..... CH 3 _.;H4 _ | OU/ PC IN S-video cable I box .... I J .... StereoVCR or Standard A/V cable Audio cable TV lower back panel L@O _ .
Connectinga DVDplayer with ColorStream ® (componentvideo), a VCR,and a satellite receiver Your TV has two sets of ColorStream ;!_(component video) N-- inputs.
Connectinga deviceto the IR OUT infrared terminal usingthe IR blaster cable for IR pass-through device control To connect 1 2 Locate device. device typically it remotely. would an entertainment center or the IR OUT connection, the 3 _j_ need to be visible the infrared This sensor cable: sensor on the front is marked on some of your devices.
Connectingan HDMr or DVI deviceto the HDMI input The HDMI input on your TV receives digital audio and uncompressed digital video from an HDMI source device, or uncompressed digital video from a DVI (Digital Visual Interface) source device. This input is designed to accept HDCP (HighBandwidth Digital-Content Protection) program material in digital form from EIA/CEA-861-EcompliantIll consumer electronic devices (such as a set-top box or DVD player with HDMI or DVI output).
REGZA-LINK® connection You can control the basic functions connect a REGZA-LINK compatible operations, see pages 59. of connected audio/video devices using the TV's remote control if you audio receiver or playback device. For an explanation of setup and TV upperbackpanel HDMI IN 1 2 Playbackdevice (REGZA-LINKDVD player,etc.) Audioreceiver r............. TV rightside panel -- H.--trlrtl , .oM,ou_ I Playbackdevice {REGZA-LINK DVD player,etc.
Connectinga digital audiosystem Note: •Some audio systems may notbecompatible with Dolby Digital bitstream signals. Older audio systems that are The TV's DIGITAL AUDIO OUT terminal outputs a Dolby _* Digital m%% or 2-channel down-mixed PCM (pulse-code modulation) signal for use with an external Dolby _ Digital decoder or other external audio system with optical audio input. You will need: • optical audio cable (Use an optical has the larger "TosLink'" connector smaller "mini-optical" connector.
Connectinga personalcomputer {PC) With either the PC IN or HDMI connection, you can watch your computer's, display on the TV and hear the sound from the TV s speakers. To connect a PC to the PC IN terminal on the TV: When connecting a PC to the PC IN terminal on the TV, use an analog RGB (15-pin) computer cable and a PC audio cable.
Preparingthe remotecontrolfor use Your TV remote control can operate your TV and many other devices such as cable converter boxes, satellite receivers, VCRs, DVDplayers, and HTIBs (home theater in a box), even if they are different brands. Installingthe remotecontrol batteries 1 Slide the battery control. cover off the back of the remote If you have a Toshiba device: Your TV remote control is preprogrammed to operate most Toshiba devices (_ page 22).
Learningaboutthe remotecontrol The buttons used for operating the TV only are described here. For the REGZA-LINK remote " ' " Using " co n trol funchons, see the sechon REGZALINK" (_ page 59). For a complete list of the remote control's functions, see the remote control functional key chart (_ pages 22-23). 3 4 6 1111-5 8 I1tl 7 13-- 0v0R_ tlii 15 --18 19 SKIP REW TV/VCR REC FF MODE SELECT sets the four remote control device modes: TV, CABLE/SAT, DVD, and VCR/ PVR.
RemoteControlfunctional key chart REMOTE CONTROL KEY TV SLEEP (TV) Sleep MODE SELECT Remote POWER Power Power 1 Digit 1 2 Digit 2 3 , DVD VCR/PVR , SAT (satellite) ToshibaTV (TV) Sleep (TV) Sleep (TV) Sleep (Tv) Sleep Power Power Power Power Power Digit 1 Digit 1 Digit 1 Digit 1 Digit 1 Digit 1 Digit 2 Digit 2 Digit 2 Digit 2 Digit 2 Digit 2 Digit 3 Digit 3 Digit 3 Digit 3 Digit 3 Digit 3 Digit 3 4 Digit 4 Digit 4 Digit 4 Digit 4 Digit 4 Digit 4 Digit 4
CH RTN/ DVD RTN Last Channel Last Channel Last Channel DVD RTN DVD RTN Pause Cable Pause SAT Pause Pause Pause Pause Pause PLAY Play Cable Play SAT Play Play Play Play Play STOP , Stop Cable Stop SAT Stop Stop Stop Stop Stop PAUSE/ STEP SKIP - Skip REW / Day - -......... Skip REW Skip REW .......... SKIP + Skip FWD/ Day + .......... Skip FWD Skip FWD ..........
Usingthe remotecontrolto operateyour otherdevices Programmingthe remote control to operateyour otherdevices Your TV remote control has one dedicated TV mode and three programmable multi-brand modes: CABLE/SAT, DVD, and VCR/PVR. The default device modes and programmable device modes are listed below. Device code setup { Find the code control device than one code until you find 2 Press the applicable mode SAT, DVD, or VCR/PVR), button blinks 3 times.
Searchingandsamplingthe code of a device (8500) Using the volume lock feature If you do not know" the device code for aparticular device, you can cycle the remote control through the available codes for that device mode and sample the functions to find the code that operates the target device. The keys available to be samEled, provided • they are apphcable to that mode, are POWER o , 1, _o_ andS. Invalid keys will be ignored while in program mode.
Multi-brandremote controldevicecodes Motorola Multitech Myrio Nova Vision TVs Brand Toshiba Code 01524 Novaplex NSC Oak Pace Cable boxes Panasonic Brand A-Mark ABC Accuphase Acorn Action Active Americast Amino Archer BCC Bell & Howell Bell South British Telecom Century Citation Clearmaster ClearMax Cool Box Coolmax Digeo Digi Director Dumont Emerson Fosgate GE General Instrument Gibralter GMI GoldStar Hamlin Hitachi Insight Jebsee Jerrold Memorex Mitsubishi Code 10008,10144 10237,10003, 10008,10014
Proscan RadioShack 10392,10566 10566,10775, 10869 RCA 10392,10566, 11142,10775, 10855,10143, 11392,11442 11377,11142, 11276,11108, 11109,11442, 11609 10099 10639,11639, 11640 10869 Samsung SKY Sony Star Choice Star Trak Thomson Tivo Toshiba UltimateTV Ultrasat Uniden Voom Zenith 10772,10869 10392,10566 11142,11442 10749,11749, 10790,10819, 11285,11286, 11287,11289, 11857,11858 11392,11640 11806 10724,10722 10869 11856 DVDs Brand 3D LAB Accurian Advent Afreey Aiwa Akai Alba Alco Allegro Apex Digital
Panasonic Philips PianoDisc Pioneer Polaroid PolkAudio Portland Presidian Prima Proceed Proscan ProVision Qwestar Radionette RadioShack RCA Realistic Reoc Rio Rotel Rowa Saba Sampo Samsung Sansui Sanyo Schneider Schwaiger Sensory Science Sharp Sharper Image Sherwood Shinsonic Slim Art Sonic Blue Sony Sova Superscan SVA Sylvania 28 20503,20490, 20571,20703, 21362,21462, 21490,21762 20503,20539, 20646,20675, 20854,21260, 21267,21354 21024 20525,20571, 20631 21020,21061, 21086 20539 20770 20675,21072
VCRs Crosley Brand A-Mark Code 30037,30240, 30000,30278, 30046 31972 30060,30048, 30039,30047, 30104,30209, 30020,30062, 30479 30037,30240, 30000 30072 30278 ABS Admiral Adventura Adyson Aiko Aiwa Akai Alba Alienware Allegro America American Amstrad Asha Astra Audiovox Action High Avis Beaumark Bell & Howell Broksonic Calix Candle Canon Capehart Carrera Carver CCE Cineral Citizen Classic Colortyme Colt Craig Criterion 30037,30000, 30124,30307 30041,30061, 30106,30175 30209,30072, 30278 31972 300
Magnavox Magnin Marantz Marta Matsui Ma tsushita Media Center MEI Memorex PC Metz MGA MGN Technology Microsoft Midland Mind Minolta Mitsubishi Motorola Movie Walker MTC MTX Multitech NAD NEC New Tech Nikko Nikkodo Nishi Niveus Media Noblex Northgate Olympus Onkyo 30{}35,30037, 30048, 30039, 30081,30240, 30000, 30149, 30563, 30593, 3(!618, 31593, 31781 30240 Optimus 30035, 30081, 30038, 30062 3{}037 Optnnica Ori on 30037, 30209 30035, 30162, 30081,31162 31972 30035 30035, 30162, 30037, 30048, 30039,
30035,30047, 30032,30033, 30000,30067, 30046,30636, 31032,31232, 31972 Soundmaster 30000 Stack9 31972 STS 30042,30105 SV2000 30000,30072 SVA 30000 30035,30(}81, Sylvania 30000,30043, 30593,31593, 31781 30240,30000, Symphonic 30002,30593, 31593 31972 Systemax 31972 TagarSystems 30000,30104 Tandy 30048,30081, Tatung 30000,30067, 30041,30008 Teac 30000,30067, 30041 Technics 30035,30162, 30037,30000 Teknika 30035,30037, 30000 Telecorder 30240 Telefunken 30041,30208 Tevion 30479 Thomas 30000,30002 Thomson 30060,
Hughes Network Systems Philips Samsung 30739 30739 30739 Inkel lntegra Jerro/d jvc Kenwood AudioAmp Brand Code Adcom Bose Carver Curtis Mathes GE 40577 40674 40892 40300 40078 Harman/Kardon JVC Left Coast Marantz NEC 40892 40331 40892 40892 40264 Optimus 40013, 40300, 40823 Philips Pioneer Realistic Shure 40892 40013, 40300, 40823 40892 40013, 40300, 40823 40013 40264 Sony Soundesign Victor W ard s Yamaha 40689, 40815 40078 40331 40078, 40013 40354, 40133 Polk Audio RCA CD players Code 504
Integra JBL JVC Kawasaki Kenwood KLH Koss LG Linn LiquidVideo Magnavox Marantz McIntosh Micromega Mitsubishi Myryad Nakamichi Onkyo Optimus Oritron Panasonic Philips Pioneer Polaroid PolkAudio Proscan RadioShack RCA Realistic Revox Samsung Sansui Sanyo Sharp Sherwood Sirius 40135,40842, 41298,41320 40110,41306 41058,40074, 41374,41495, 41811 41390 41313,41570, 41569,40186 41390.
Icon Main menulayout Menu SETUP To open the main menus {illustrated below), press on the remote control or TV control panel.
Navigatingthe menusystem You can use the buttons on the remote control or TV control panel to access and navigate your TV's onscreen menu system. • Press _ to open the main menus. • Press < or _ on the remote control or TV control panel to select the top menu, its respective items will appear below. • To use the items, press A or • on the remote control or TV control panel to move up and down through them and press _. • Press < or _ to adjust • All menus a selection ° To close settings.
7 Initial Setup When Setup you first turn on or reset window will appear. the TV, the Initial Press _ to select Start Scan and continue with the Auto Tuning. You can stop the Initial Setup with _/_]. However if you do not finish the entire Initial Setup process, the Initial Setup window will appear every time you turn on the TV. 1 In the Menu Language field, press select your preferred language. 2 Press • or • to select Time Zone and set your desired time zone with • or • and press _.
Configuringthe antennainput sourcefor the ANT/CABLE terminal 1 2 From In. the SETUP menu, highlight ANT/CABLE • Programming channels when the ANT/CABLE input is configured for Cable will take substantially longer than when the antenna input is configured for Antenna. This is normal; however, once channel programming is finished, you should not have to repeat the programming process again unless your Cable TV service lineup changes significantly.
Settingchannelskip To prevent certain channels from being channel positions can be skipped. 1 2 3 From the and press Press press SETUP @. menu, highlight Settingvideo inputskip viewed, To turn on the skip: Press • or • to select a channelposition skipped and press @. A tick will appear to be in the box. the tick, press it will TV Settings • or • to select Channel Options and _. The list of channels will appear.
Setting the Auto Input feature Setting the time zone This feature allows you to change TV inputs using the MODE SELECT buttons--TV, CABLE/SAT, DMD, VOR/PVR--on the remote control. Once an input has been set for a specific MODE SELECT button, the TV will automatically switch to the input when you press and hold the MODE SELECT button for 2 seconds. The Time Zone setup will allow you to specify the correct time zone for your region.
Selectingthe Power-OnMode _Viewingthe systemstatus You can select either Power-Saving or Fast mode. • Power-Saving mode keeps power consumption in standby mode to below lW. As a result, it takes a bit longer for the TV to turn on. 1 2 From the SETUP Information. Press _ menu, to display System highlight the system information. • Fast mode increases power consumption in standby mode. As a result, the TV will turn on more quickly. 1 2 From the SETUP Mode.
Selecting the video inputsource to view To select 1 the video Press _) panel. input source oll the remote control or TV control _) on the remote control to change the input. a REGZA-LINK device: 1 Press • or • to highlight input. 2 Press _ to display the list of REGZA-LINK devices for that input. 3 If there are multiple REGZA-LINK the input, use • or • to highlight device.
To set up the Channel Tuningchannels Tuning channels using the Channel Browser 1 From the PREFERENCES menu, highlight Channel Browser Setup and press'&_. 2 Press • or • to highlight Navigation, and then press • or • to select either Select Mode or Browser Mode. TM Th e Cannel h Browser '.....provides an easy navlgahon interface for all your channels and inputs. This feature allows you to: • Navigate the contents of all of your inputs. • Keep a lis! of your Browser, below). • Keep a history viewed.
Elements of the Channel Browser TM 1 2 3 Adding and clearing channels and inputs in the History List 4 Q Adding channels and inputs to the History As a channel or input is tuned, the Channel g 6 Current list (History, ANT/CABLE, Favorites, or REGZA-LINK) 2 Input 3 Channel 4 Channel or input the browser 5 Channels 6 Input Inputs, type or input stored currently being viewed that is currently in the History highlighted in List To toggle among the available lists: After opening the
Setting the Channel Tuning Mode This feature allows you to choose how tuning will be handled for analog and digital channels when the TV is in Antenna mode. Note: To use this feature, the ANT/CABLE In must be set to Antenna (_" page 37). The channel tuning mode has three options.
Switching between two channels using SurfLock TM The SurfLock I_ feature temporarily "memorizes" one channel to the _ button, so you can return that channel quickly from any other channel by pressing _.To memorize a channel to the button: 1 2 3 Tune the TV to the channel into the _ button. you want to to program Press and hold _ for about 2 seconds until the message_ "Memorized" a ppears on-screen. The channel has been programmed to the _ button.
Selectingthe picture size You can view many program formats in a variety of picture sizes--Native, 4:3, Full, TheaterWide 1, TheaterWide 2, TheaterWide 3, Normal and Dot by Dot. Note: The "picture size" iflustrations are examples only. The format of the image (in any of the picture sizes) wil! vary depending on the format of the signal you are currently watching. Select the picture size that displays the current program the way that looks best to you.
Picture Size Picture Size Native (for 480i (HDMI), 480p (HDMI), 720p, l O8Oi, and 1080p signal programs) _o_© TheaterWide 1 (for 4:3 format programs) © 000 000 • If receiving a 1080i, 1080p, 720p, 480i (HDM]), or 480p (HDMI) signal program, Native mode scales the video to display the entire picture within the borders of the screen (i.e. no overscanning). • This is especially useful for external HD sources such as DVHS movies or PC graphics. • None of the picture is hidden.
Scrollingthe picture Usingthe 4:3 Stretch If the edges the position When 4:3 Stretch is activated, system changes 4:3 programs of the picture image. are cut off, you can adjust Note: You can adjust the picture position when the picture size is set to TheaterWide 2 or TheaterWide 3. 1 2 3 From the SETUP Position.
Adjustingthe picture quality Adjustingthe picture The picture picture Mode AutoView from the Picture Quality rM Automatically adjusts picture settings based on ambient light conditions and input signal content Sports Bright Standard Standard Movie Lower Game Designed for playing requiring split-second the on-screen display the controller a video game timing between and input from Designed documents of PC tables PC and dynamic picture contrast picture settings for darkened for viewin
Usingthe TheaterLock feature Usingthe closed caption mode The TheaterLock '_' feature allows you to "lock" items in the PICTURE menu that affect the picture display. These items will be grayed, out. and unavailable,, , when the TheaterLock setting ]s set to On . Analog CC Mode TM 1 From the PICTURE Theaterkock. 2 Press _ or • to select menu, highlight On, and then press @.
Digital CCSettings CCSelector You can customize the closed caption display characteristics by changing the background color, opacity, text size, type, edge, and color. You can use the CC and Digital Audio Selectors to temporarily override the default analog caption mode (set in Analog CC Mode) for a particular channel. However, once you change to another analog channel, the closed caption setting will automatically change back to the current Analog CO Mode setting.
Selecting stereo/SAP broadcasts Adjustingthe audio Muting the sound Press _ on the remote control to partially reduce (1/2 MUTE) or turn off (MUTE) the sound. Each time you press _ the mute mode will change in the following order: _.I/2 Mute --_ Mute ---_ Volume--_---] If the closed caption mode is set to Off when you select "MUTE" mode, the closed caption feature is automatically activated if the TV program is Closed Captioned.
Selectingthe optical audio output format Setting the PINcode You can use this feature to select the optical audio output format when..you connect a Dolby Digital decoder or other digital audio system to the DIGITAL AUDIO OUT terminal on the TV. A PIN code 1 Tune to a digital input. 1 2 From the SETUP menu, highlight Connection and press @.
BlockingTVprogramsandmoviesby rating(V-Chip) Some TV programs and movies include signals that classify the content of the program (violence, sex, dialogue, language). The V-C_ip feature in this TV detects the signals and blocks the programs according to the ratingsyou selecL (For rating descriptions, see the tables on the next page.) Note: Rating blocking this TV, which supports To block is a function of the V-Chip feature in the U.S. V-Chip system only.
Unlocking programs Independent rating system for broadcasters Ratings Descriptionand Contentthemes TV-MA Mature Audience Only (This program is specifically designed to be viewed by adults and therefore may be unsuitable for children under 17.) L) Crude or indecent language S) Explicit sexual activity V) Graphic violence TV-14 Parents Strongly Cautioned (This program contains some material that many parents would find unsuitable for children under 14 years of age.
Usingthe GameTimer ® Lockingchannels With the Lock feature, you can lock specific channels. The locked channels can only be accessed by entering the PIN. 1 From the SETUP menu, TV Settings highlight and press 69. Press • or • to select Channel Options and press @. The list of channels will appear. 2 You can use the GameTimer to set a time limit for playing a video game (30-120 minutes).
Usingthe PCsettings feature Setting the PCAudio You can view an image from a PC on the TV screen. When a PC is connected to the TV's PC IN terminal, you can use the PC Settings feature to make adjustments to the image. If the edges of the picture are cut off, readjust the Horizontal Position and Vertical Position. If the icture is affected by interference, readjust the Clock hase and Sampling Clock.
Settingthe OnTimer Settingthe SleepTimer You can set the on timer to automatically turn on the TV to a preset channel or input at a preset time. You can set the sleep timer to turn off the TV after set length of time (maximum of 12 hours and 50 minutes). To activate the On Timer: 1 From the APPLICATIONS Timer and press {_. menu, highlight On 2 Press • or • to select Enable On Timer, and then press 4 or •to select On.
REGZA-LINK UsingREGZA-LINK ® This feature uses CEC technology and allows you to control Toshiba REGZA-LINK compatible devices from the TV remote via HDMI connection (_ page 17). When Enable REGZA-LINK in the REGZA-LINK Setup menu is set to On, the following REGZALINK functions will be enabled. REGZA-LINK ® playbackdevice (DVD player, etc.) control With your TV's remote control, or using the REGZALINK Player Control menu, you can control the connected REGZA-LINK playback device you are watching.
Amplifier VOLUMEand MUTE controls To set the REGZA-LINK With your TV's remote control, you can adjust or mute the sound volume of your amplifier. First, set the MODE SELECT switch on the remote control to W. • ?h _-_ adjust • (_ turns the volume off the Preference to Amplifier _n the REGZAmenu. a connected REGZA-LINK device _such as etc) is selected for the Amplifier input • You can also use this function when the amplifier is connected to the TV's DIGITAL AUDIO OUT terminal (not HDMI connection).
Using the HDMI settings feature This menu consists of the following items HDMI capabilities) and will be grayed out HDMI inputs. Some HDMI legacy sources may not work with your HDMI TV, please try setting the (new on nonproperly following R°pti°ns (Deep Color, Lip Sy nc, INSTAPORT TM, and GB Range) to Off. Adjusting these settings should allow your HDMI legacy source to operate properly with your TV.
DisplayingTV status information To display TV status information using RECALL: Press _ on the remote control. The following information will display (if applicable): • Current input (ANT/CABLE, Video 1, etc.) • If ANT/CABLE is the current in_,ut, either "CABLE" (for cable TV) or "ANT' (for over-the-air broadcasts).
_ _i !_i¸ UsingDynamicContrast Usingthe advancedpicture settings features Dynamic Contrast detects changes in the picture quality that affect the appearance of your contrast Settings and then automatically adjust the video. Note: Some of the Advanced Picture Settings features will not be available for adjustment when the Picture Mode is set to AutoView. Using Resolution+ TM The Resolution+ TM feature allows you to adjust levels for your desired picture settings.
UsingExpert Mode UsingMPEGNR This feature individually enables/disables the Red, Green, and Blue components of the picture to allow for more accurate adjustment of each color. The MPEG noise reduction reduce visible interference compression. 1 From the PICTURE menu, highlight Picture Settings and press _. 1 2 Press • or • to select the Expert press {_. 3 Press • or • to select either you want to adjust.
Using the Auto Brightness Sensor Usingthe ColorMaster When the Auto Brightness Sensor feature is set to On, the TV will automatically optimize the backlighting levels to suit ambient light conditions. The Co]orMaster standard colors. 1 From the PICTURE menu, highlight Picture Settings and press _. 2 Press • or • to select Auto Settings and press _. 3 Press • or • to highlight Sensor. 4 Press *4 or • to select Auto On or Off and press _.
Selecting the color temperature To adjust 1 2 3 4 Usingthe advancedaudio settings features the color temperature: From the PICTURE menu, highlight Picture Settings and press @. Press • or • to select press _. Advanced Color Temperature and Press • or • to highlight Color Temperature. Press range < or !_ to adjust tile level. The adjustment is 0 (warm) to 10 (cool), then press _.
Basic operation Usingthe Media Player Auto The TV allows you to enjoy photos, movies or music contents stored on a USB device or SD memory card (only for photos). 1 start: From the APPLICATIONS menu, Media Player and press @. highlight Note: • SD memory card is only available for viewing JPEG files. • Do not insert/remove USB device and SD memory card during using. •_ is not available during playback. 2 3 4 Media Player Specifications 5 Press • or • to select Photo, Movie, Music and press @.
PlayingDivX® files (onlyfor USBdevices) To locate Press _ content. After selecting a file (_¢ "To select a file in the list of contents" on page 67), press {___or _ to begin playback. Note: • The Media Player memorizes the location where playback is stopped. The content resumes playback from the location where playback was stopped when you press _ next time. To start playback from the beginning regardless of the !ocation where playback was stopped, press _ sToPtwice in Step 2 below.
Compatibility files File format:DivX ® Maximum video resolution: 720 x 480 (30 fps), Total number of files: Less than 500 per a folder • ABOUT DIVX VIDEO: DivX ® is a digital video format created by DivX, Inc. This is an official DivX Certified or DivX Ultra Certified device that plays DivX video. • ABOUT DIVX VIDEO-ON-DEMAND: This DivX ® Certified device must be registered in order to play DivX Video-on-Demand (VOD) content.
To set the repeat mode: 1 Press _. appear. 2 Press • or • to select 3 Press _or_. To set the Slide The current The setting repeat setting will Off, All or 1. is effective until the TV is turned off. File format: Press • or • to highlight or Repeat). 3 Press • or • to adjust 4 Press _ _ during or _ in Single View settings: Slide Show mode. the item Clnterval Time the setting. to return to Slide Show.
Generaltroubleshooting Before calling a service technician, please chapter for a possible cause of the problem solutions you can try. check this and some Black box on-screen • The closed caption feature is set to one of the Text modes (T1, T2, T3, or T4). Set the closed caption feature to Off (_ page 50).
• If you are unableto tune digital channels, checkthe antenna configuration (_ page 37). If you are still unable to tune digital channels,clear all channelsfrom the channel list and reprogram channels into the channel memory (_ page 37). If you are still unableto tune digital channels, usethe ResetFactoryDefaults procedure(_ page40). Also see "TV stops respondingto controls" and "Other problems" (_4_page 71).
LEDindications .... The Power and On Timer LED lights indicate the TV's status, as described on the TV front below. TV front On Timer Power LED Indication Power LED • Green is ON (solid) The TV is operating properly. • Orange is ON (solid) Standby with Power-On Mode set to Fast. See Selecting the Power-On Mode" (_ page 40). • Green blinks three times TV is powering up. Wait several green LED stops blinking. • Green blinks seconds until the Abnormal operation of BUS line.
HDMI INPUT: HDMI compliant HDCP compliant Audio Lip Sync supported Deep Color supported (10 bit 4:4:4, 12 bit 4:4:4) Suggested formats: See table on the next page. HDMI Audio:2-channel Linear-PCM; 32/44.1/48 kHz sampling frequency; 16/20/24 bits per sample FIXED AUDIO OUTPUT: 150 mv (rms) (30% modulation equivalent, 2.2 k ohm or less) DIGITAL AUDIO OUTPUT: Optical type IR OUT: 3 V(p-p), 3.5 mm mono socket PC INPUT: 15-Pin D-sub Analog RGB TM Specifications Note: • This model below.
Acceptablesignal formatsfor PCIN and HDMIterminals PC IN signal formats Note: • The PC IN on this TV only accepts the signal formats which are compliant with VESA-DMT as shown in the table below. Since some PCs input signals which are different from the resolution and frequency described in the table below, the following phenomenon may occur, incorrect display, false format detection, picture position failure, blur, or judder.
HDMIsignalformats Note: • The HDMI inputs on this VESA as the table below. and frequency described detection, picture position device to conform to any TV only accept VGA, SVGA, XGA, WXGA, and SXGA signal formats which are compliant with Since some PCs and HDMI or DVI devices input signals which are different from the resolution in the table below, the following phenomenon may occur, incorrect display, false format failure, blur, or judder.
LimitedUnited States Warranty for LCDTelevisions 26" and Larger Toshiba America Consumer Products, LLC. ("TACP") makes the following limited warranties to original consumers in the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS LCD TELEVISION AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE. LCD TELEVISIONS PURCHASED IN THE U.S.A. AND USED ANYWHERE OUTSIDE OF THE U.S.A.
LimitedCanadianWarranty for Toshiba Brand Flat Panel Televisions Toshiba of Canada Limited ("TCL") makes the following limited warranties to original consumers in Canada. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS TOSHIBA BRAND FLAT PANEL TELEVISION (the "TELEVISION(S)" or "Television(s)") AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE.
Disclaimer and Limitation of Remedy TO THE EXTENT NOT PRECLUDED BY LAW, ALL OTHER EXPRESS AND IMPLIED WARRANTIES, CONDITIONS AND REPRESENTATIONS FOR THIS TELEVISION, INCLUDING THE IMPLIED WARRANTIES, CONDITIONS AND REPRESENTATIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED AND EXCLUDED.
A copy of the GPL source code in this product may be i obtained by contacting Toshiba Consumer Solutions at I i (800)631-3811 There will be a charge to cover the costs of providing the source code. IE A copy of the LGPL source code in this product may be , obtained by contacting Toshiba Consumer Solutions at I (800)63!-3811, There will be a charge to cover the costs of providing the source code. Portions of this software are copyright © <2007> The FreeType Project (www.freetype.org), All rights reserved.
A H Antenna input configuration ........... Audio quality adjustments .............. Audio system connection ............... Auto Aspect .................................... 37 52 18 48 HDMI audio mode ........................... 61 REGZA-LINK ® feature ..................... 59 Remote control Auto Brightness Sensor .................. Auto Input ....................................... Auto power off ................................ 65 39 62 HDMI settings .................................
TOSHIBA Corporate NATIONAL AMERICA Headquarters: SERVICE 82 TOTOWA DIVISION: TOSHIBA OF HEAD OFFICE: 191 McNABB SERVICE CENTERS: TORONTO: 191 McNABB MANUFACTURED TOSHIBA 1420-B CONSUMER ROAD, WAYNE, TOSHIBA NJ 07470, DRIVE, CANADA STREET, STREET, U.S.A. LEBANON, TN 37087, U.S.A. LTD. MARKHAM, MARKHAM, L.L.C. PRODUCTS, ONTARIO, ONTARIO L3R 8H2, CANADA L3R 8H2, CANADA - TEL: (905) 470-5400 - TEL: (905) 470- 5400 BY ELECTROMEX, S.A.
Congratulations Getting There AddidonaI HDTV on the purchase of your Toshiba HighoDe_nit_on Te[ev_siono You _ust get HD Signal to get an HD Piet_re_ is as easy as [, 2 or 3_ are 3 basic ways to receive an HDTV HDTV new Antenna Reference Infernat on can be obtained Signal on your from www ant_nnaweb,org Once you have a HighoDefinition ff you are connecting direcd x from new High-Definition T'4 Digital CaMe or Digi_l Satellite is not HD'T'_ The picture qualit 7 is superior to s
If you are experiencing a technical problem or have questions regarding operation, authorized service centers, warranty or parts, please contact our Customer Service Department at: 1-(800} 631-3811 (For US Customers) 1-(800) 218-3404 (For Canadian Customers) Many questions regarding parts, service, and warranties can be answered by visiting the Customer Support Section of our (For US Customers) wwwotoshibaoca (For Canadian Customers) THANK YOU Si vous 6prouvez des difficult6s techniques ou si vous avez
Appearance of the pedestalL'aspect du support de table depend des modules respectifs. El aspecto de la base varia en cada modelo respectivo. ........................... ×! / X4 X4 33 x4 Tighten the screws firmly. Serrez bien les vis. Apriete los tornillos firmemente. Tighten the screws firmly. Serrez bien les vis. Apriete los tornillos firmemente. NOT insert bolts in the locations circled. NE PAS INSt_RER DES ENDROITS ENCERCLI_S.
Whencleaningyour cabinet, please first remove any or dust from the ace and _n gently wipe with the enclosed cleaning cloth or other soft cloth. Harsh rubbing or use of a dirty cleaning cloth or stiff cloth will scratch the surface of the cabinet. Quandvous nettoyez votre cabinet, s'il vous plait, au d_but, enlevez toutes saletGs ou poussi_resqui pourrait _tre sur la surface et puis doucementnettoyez avec le chiffon prGvu a cet effet ou un autre chiffon lisse.
Please send products and other correspondence to: First Class Toshiba America 82 Totowa Road Consumer Products, L.L.C. Postage Required Post Office will not deliver without Wayne, NJ 07470 proper postage. Toshiba America P.O. Box 3980 Consumer Peoria, IL 61612-3980 Products, L.L.C.
IMPOHIANT! TOSHIBA Image is Everything PRODUCT REGISTRATION TM CARD Complete and return this Product Registration Card within 10 days to receive valuable Toshiba information. Failure to complete and return this card does not diminish your warranty rights. See details inside... If you have comments Toshiba America Consumer Copyright © 2004 All Rights Reserved or suggestions about our product, please write to: Products, L.L,C. >> 82 Totowa Roacl >> Wayne, NJ 07470 Please seal with tape.
Congratulations our commitment for choosing Toshiba, a leader in developing tomorrow's technology to excellence, we need to understand our customers' needs. today. Toshiba is committed to producing high-quality, reliable and innovative products. To uphold Please complete the following Product Registration Card. The information we are asking from you below will help us bring you new products specifically designed to meet your needs.
