Manual

Adding channels to the TV's memory
Your TV will stop on specific channels that are stored in the TV's
cbannel memory when you press Channel • or •. Use the steps
below to set all active channels in your area automatically.
Programming channels automatically
Your TV can automatically detect all active channels and store them
in its memor?c After the TV has stored the channels in its memory,
you can erase channels or add }_ur favorite channels. If you use both
ANT1 and ANT-2 terminals, you must program channels for each
input source.
To add channels:
1. Press MENU, then press _ or I1_until the SET UP menu
appears.
2. Press • or • until TV/CABLE is highlighted.
3. Press _ or I1_to highlight either TV or CABLE, depending on
which you use.
_SET UP
LANGUAGE ENGL_SN
CLOCK SET
ADD/ERASE ADD
If you use an antenna, choose TV.
If you use cable, choose CABLE.
4. Press • to select CH PROC, RAM.
MENU
Channel AV
_£ET UP
LANGUAGE ENGLISH
CLOCK SET
ANTIi2 ANTI
5. Press _ or I_ to start channel programming. The TV will
automatically cycle througb all the TV or Cable channels
(depending on which 3_u selected), and store all active channels
In the channel memor>
While the TV is cycling through the channels, the message
"Programming Now--Please Wait" appears.
6. When channel programming is complete, the message
"Completed" appears.
7. Press Channel • or • to view the programmed channels.
23