46BL702B DIGITAL Series "Register your TV online at: www.toshiba.co.
English Get started with Freeview Freeview gives you over 50 TV channels to play with, not to mention 25 radio stations. Start watching all your favourite TV content today, just connect your aerial and tune in. Keep up-to-date New channels are launched on Freeview from time to time along with other updates to the service. So it pays to retune your digital TV periodically to make sure your Digital TV/Radio channels are up to date.
Contents English Safety Precautions.................................................. 4 Air Circulation...................................................... 4 Heat Damage...................................................... 4 Mains Supply....................................................... 4 Warning .............................................................. 4 Do........................................................................ 4 Do not........................................................
Appendix A: PC Input Typical Display Modes........ 39 Appendix B: AV and HDMI Signal Compatibility (Input Signal Types)............................................... 40 Appendix C: Supported File Formats for USB Mode..................................................................... 41 Appendix D: PIN Information ................................ 41 Specifications and Accessories............................. 42 License Information............................................... 43 Questions and Answers....
Safety Precautions English This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products and some points may not apply to the goods you have just purchased.
Installation and Important Information English Where to install Sturdy tie (as short as possible) * Set controls and stand style is dependant on model. Locate the television away from direct sunlight and strong lights. Soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen. Place the TV on a stable, level surface that can support the weight of the TV.
Important safety information English DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. Headphone Warning Loud music can damage your hearing irreversibly. Do not set the volume to a high level when listening through headphones, particularly for extended listening periods. Information for the DVB-T function • Any function relative to the digital television (with the DVB logo) is available only within the country or area where such signals are transmitted.
Important safety information (continued) • This set should only be connected to an 220-240V AC 50Hz mains power supply. Do not attempt to connect it to any other type of supply. • Do not open this unit. An attempt to repair the unit by a non-expert could be dangerous and potentially cause a fire hazard. All repairs must be carried out by qualified service personnel only. • Keep away from rodents. Rodents (and also cockatiels) enjoy biting electric flexes.
To display your LCD TV using a wall bracket English When using a Wall Bracket Please use a wall bracket appropriate for the size and weight of the LCD TV. • Two people are required for installation. • To install a wall-mount from another manufacturer. (1) Unplug and remove any cables and/or other component connectors from the rear of the TV. (2) Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket.
The Remote Control Simple at-a-glance reference of your remote control. To switch your TV to standby mode. Subtitle On/Off Mono-Stereo / Dual I-II To enable the displaying of subtitles. Stereo/Bilingual Transmissions Image size Expand (in TXT mode) Red button SCREEN LANG 1 2 3 4 5 6 7 8 9 0 Teletext / Mix To call up text services in analogue broadcasts and interactive services in digital mode. Return To return to the previous level of the on-screen menu.
Connecting External Equipment Before connecting any external equipment, remove the mains plug from the wall socket. English Side View COMMON INTERFACE The Common Interface is for a Conditional Access Module (CAM). HDMI Input Sockets SCART Sockets USB Input Side HDMI Input Headphone VGA Input ANT. (Aerial) Input USB Input SIDE AV YPbPr Video Inputs Audio Inputs Subwoofer SPDIF Coaxial Out Out * a decoder could be Digital Satellite, Free to Air or any other compatible decoder.
Connecting an HDMI® or DVI Device to the HDMI Input English The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI source device or uncompressed digital video from a DVI (Digital Visual Interface) source device. This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) programme material in digital form from EIA/CEA-861-D–compliant [1] consumer electronic devices (such as a set-top box or DVD player with HDMI or DVI output).
Connecting a Computer Connecting a USB Memory English To Connect a Computer To Connect a USB Flash Drive With either an RGB/PC or an HDMI connection, you can watch your computer’s display on the television and hear the sound from the television’s speakers. • You can connect a USB Flash Drive to your TV by using the USB input of the TV. This feature allows you to display/play music, photo or video files stored in a USB stick.
Power Save Mode • You not only help to the environment but also you can reduce electricity consumption electricity thanks to the energy efficiency feature of this TV. To reduce energy consumption, you should take the following steps: • You can use Power Save Mode setting, located in the Settings menu. If you set Power Save Mode as On, the TV will switch to energy-saving mode and luminance level of TV set will be decreased to optimum level.
Controlling the TV English A wide variety of external equipment can be connected via the sockets located on the side and back of the television. Whilst all the necessary adjustments and controls for the television are made using the remote control, the touch controls on the left side of the television may be used for some functions.
Initial Installation IMPORTANT: Ensure that the aerial is connected and a Common Interface module is not inserted before switching on the TV for the first time installation. 1. Connect the mains plug and switch the TV on using the standby switch. If the TV does not switch on, press any numbered or standby button on the remote control, then the language selection menu will be displayed. This screen will appear the first time that the television is switched on and each time the television is reset. 6.
Initial Installation - continued English 10. The Auto tuning screen will appear and the television will start to search for available stations. The progress bar will move along the line. You must allow the television to complete the search. Tthe following OSD will be displayed on the screen and the television will search for digital TV broadcasts: Note: You can press MENU button to cancel. • After all the available stations are stored, Channel List will be displayed on the screen.
Auto Tuning English Auto Tuning As new services are broadcast, it will be necessary to retune the television in order to view them. • Auto Tuning will completely retune the television and can be used to update the channel list. It is recommended that Auto Tuning is run periodically to ensure that all new services are added. All current channels and settings, i.e. locked channels, will be lost. • Press MENU button on the remote control and select Install and Retune by using Left or Right button.
Manual Tuning, Analogue Fine Tuning The television can be tuned-in manually using Manual Search feature. English Digital Aerial Manual Search Analogue Manual Search The feature is available for service engineers or can be used for direct channel entry if the multiplex channel is known. The television can be tuned-in manually. For example: if the television cannot be connected to a media recorder/decoder with a SCART lead or to tune-in a station on another System.
General Operation English Stereo and Bilingual Transmissions Standby Notifications If stereo or dual language broadcasts are transmitted, the word Stereo or Dual will appear on the screen each time positions are changed, disappearing after a few seconds. If the broadcast is not in stereo, the word Mono will appear. If the TV switches off while in No Signal mode, the following on-screen message will be displayed on the next switch-on: Stereo… Press LANG to select Stereo or Mono.
Channel List, Sorting Programmes, Programme Locking English You can view stored channels and sort them by using the Channel List feature. Viewing Channel List Moving a Channel The channel order may be changed to suit your personal preference. • Highlight the desired channel by using Up or Down buttons. • Select Channel List from the main menu and press OK. The following menu will be displayed: • Select Edit Channel List to manage all stored channels.
Viewing Info Banner, Electronic Programme Guide English Viewing Info Banner • Press YELLOW button to switch to timeline view. • Press INFO button the information screen will appear giving details of the channel and programme currently being viewed. • Press GREEN button to list the schedule. • Press BLUE button to display filtering options. Note: There are alternative views of EPG screen. Button functions will be displayed at the bottom of the menu screen.
Re-tune Section English Re-tuning: TOSHIBA Freeview Products Toshiba Digital TV This guide can be used to help you re-tune the following product with the remote control below. Make sure your TV is on and press 80 for the BBC News channel SCREEN LANG SUBTTL PIP 1 2 3 4 5 6 7 8 9 0 BACK 1 ) Press MENU and press ◄ or ► to select Install and Retune and press OK. Press ▲ or ▼ to select Automatic channel scan (Retune) to start the process.
Language Selection English Language Settings Using this menu you can adjust the preferred language settings. • Select Language from Setup menu and press OK to view this menu. Press the BACK button on the remote control to exit. Preferred These settings will be used if available. Otherwise the current settings will be used. Audio: by pressing Left or Right keys change the audio language. Subtitle: alter the subtitle language with Left or Right keys. The chosen language will be seen in subtitles.
Digital Settings - Parental Control, Menu Lock, Set PIN English You can view or set parental preferences of your TV. Viewing Parental Control Menu Child Lock Press MENU button and select the Settings by using Left or Right button. Press OK button to view Settings menu. Use Up or Down button to highlight Parental and press OK to continue: Press MENU button and select settings by using Left or Right button. Press OK to continue. Use Up or Down to select parental and then press OK to continue.
Configuring Picture Settings Configuring Picture Settings Brightness You can use different picture settings in detail. You can customize current picture mode settings as desired. For example you change items such as, Brightness, Contrast, Colour, Sharpness and Hue. Press MENU button and select picture by using Left or Right button. Press Up or Down to select brightness. Sets the brightness value for the screen. Press MENU button and select the Picture icon by using Left or Right button.
Configuring Picture Settings - continued English Advanced Settings Colour Shift Select Advanced Settings and press OK button to view or edit advanced picture settings: Press MENU button and select picture by using Left or Right button. Press Up or Down to select colour shift. Adjust the desired colour tone. Colour Temp Colour Temperature increases the ‘warmth’ or ‘coolness’ of the picture by increasing the red or blue tint. • In the PICTURE menu, press Up or Down to select Advanced Settings.
Changing Picture Format “Note: Using the special functions to change the size of the displayed image (i.e. changing the height/width ratio) for the purposes of public display or commercial gain may infringe on copyright laws.” Note: You can shift to screen up or down by pressing “ Zoom, Cinema or Subtitle. ”/“ ” buttons while picture zoom is selected as 14:9 (*) When AUTO is selected, the aspect ratio of the screen is adjusted by the information provided by the selected source (if available).
Configuring PC Picture Settings You can set PC Mode picture settings when using the TV as a PC monitor. English PC Picture Settings (*) H Position (*) While in VGA/PC mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added to the Picture Settings while in VGA/ PC mode. H (Horizontal) Position shifts the image horizontally to right hand side or left hand side of the screen. PC Picture controls • Press the Left or Right button to adjust the value.
Configuring Sound Settings You can configure sound settings of your TV by using Sound Settings menu. English Configuring Sound Settings Sound settings can be configured according to your personal preferences. Press MENU button and select the Sound icon by using Left or Right button. Press OK button to view Sound Settings menu. In equalizer menu, the preset can be changed to Music, Movie, Speech, Flat, Classic and User. Press the MENU button to return to the previous menu.
Settings Menu Operation, Conditional Access English Configuring Your TV’s Settings Timers Detailed settings can be configured to suit your personal preferences. Sets timers for selected programmes. Press MENU button and select Settings by using Left or Right button. Press OK button to continue. Use Up or Down button to select Timers and then press OK button to continue. Viewing Settings Menu Press MENU button and select Settings icon by using Left or Right button. Press OK button to view Settings menu.
Setting Timers, Setting Date/Time English • The CAM should be correctly inserted, it is impossible to insert fully if reversed. The CAM or the TV terminal may be damaged if the CAM is forcefully inserted. Connect the TV to the mains supply, switch on and then wait for few moments until the card is activated. • When no module is inserted, “No Common Interface module detected” message appears on the screen. • Refer to the module instruction manual for details of the settings.
Source Settings, Other Controls English Configuring Source Settings Configuring Other Settings - General You can enables or disable selected source options. The TV will not switch to the disabled source options when SOURCE button is pressed. You can configure the settings of your TV. Select Configuration from Setup menu and press OK to view this menu. Press the BACK button on the remote control to exit.
Other Controls English Blue Background Audio Description Press MENU button and select settings by using Left or Right button. Press OK to continue. Use Up or Down to select others settings and then press OK. Select Blue Background using Up or Down buttons and use Left or Right to set. If the signal is weak or absent, the TV will automatically change to a blue screen. To enable this, set Blue Background to On. Press MENU button and select settings by using Left or Right button. Press OK to continue.
Other Controls - continued English Full Mode (optional) If you connect a device via HDMI or YPbPr connectors and set 1080i/1080p resolutions, Full picture mode will be visible and the option “Full” will appear in the Picture Format screen selection menu. TXT Language Press MENU button and select settings by using Left or Right button. Press OK to continue. Use Up or Down to select others settings and then press OK. Select TXT Language using Up or Down buttons and use Left or Right to set.
USB Media Browser This TV allows you to enjoy photo, video or music files stored on a USB device. English Manual Start • To display Media Browser window, you can press MENU button on the remote control and then select Media Browser by pressing Left or Right button. If the USB stick is not recognised after power off/on or first time installation,first unplug the USB device and power off/on the TV set, then plug the USB device in again. • Press OK button to continue.
USB Media Browser - continued This TV allows you to enjoy photo, video or music files stored on a USB device. English Viewing JPG Files Slideshow Feature To view photo files from a USB disk, you can use this menu screen. When you select Photos from Media Browser, available image files will be filtered and listed on this screen. You can use this feature to display photos on your TV. • Press RED button to zoom picture. • Press GREEN button to continue with the slideshow.
USB Media Browser - continued This TV allows you to enjoy photo, video or music files stored on a USB device. English Video Playback Note: When you select Videos from Media Browser, available video files will be filtered and listed on this screen. You can use Up or Down button to select a video file and press OK button to play a video. You can set subtitles by using OK button before starting the playback or by using LANG button during the playback.
Analogue Text Services English This television has a multi-page text memory, which takes a few moments to load. Analogue Text Services Revealing Concealed Text Before using the text services, the required language region must be chosen. To discover the solutions on quiz and joke pages press the INFO button. • Select Language from the SETTINGS menu. • Press the Left or Right button to choose the required language region. • After the teletext language is selected, press MENU button to exit.
Appendix A: PC Input Typical Display Modes Your TV may not support different resolutions. Supported resolution modes are listed below. If you switch your PC to an unsupported mode, a warning OSD will appear on the screen.
Appendix B: AV and HDMI Signal Compatibility (Input Signal Types) English Source Supported Signals PAL 50/60 EXT (SCART SOCKETS) NTSC 60 RGB 50 RGB 60 SIDE AV YPbPr PAL 50/60 NTSC 60 480i 60Hz 480p 60Hz 576i 50Hz 576p 50Hz 720p 50Hz 720p 60Hz 1080i 50Hz 1080i 60Hz 1080p 50Hz 1080p 60Hz 480i 60Hz 480p 60Hz 576i 50Hz 576p 50Hz 720p 50Hz HDMI3 720p 60Hz HDMI4 1080i 50Hz 1080i 60Hz 1080p 50Hz 1080p 60Hz 1080p 24Hz HDMI1 HDMI2 Note: In some cases a signal on t
Appendix C: Supported File Formats for USB Mode Video .mpg, .mpeg MPEG1, 2 .dat MPEG1, 2 .vob MPEG2 .mkv H.264, MPEG1,2,4 EAC3 / AC3 .mp4 MPEG4, H.264 PCM/MP3 MPEG2, MPEG4 PCM/MP3 H.264 PCM - MPEG 1 Layer 1 / 2 (MP3) Movie .avi Music .mp3 .bmp .sub Subtitle MPEG Layer 1/2/3 MPEG2 max 1920x1080 @ 30p 20Mbit/sec max 1920x1080 @ 30p 20Mbit/sec Baseline JPEG .jpg .jpeg Photo Remarks (Maximum resolution/Bit rate etc.
Specifications and Accessories English Broadcast Systems/Channels DVB-T: MPEG2, DVB-T: MPEG4 HD DVB-C: MPEG2, DVB-C: MPEG4 RECEIVING CHANNELS VHF (BAND I/III) UHF (BAND U) HYPERBAND Video Input PAL, SECAM, NTSC 4.
License Information • DVB is a registered trademark of the DVB Project. • [1] EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection, which is being standardized for reception of high-definition video signals. Because this is an evolving technology, it is possible that some devices may not operate properly with the television. Licence Notification Manufactured under license from Dolby Laboratories.
Questions and Answers English Questions Q A Q A Q A Q A Q A Q and Q A Why is there no sound or picture? Check the TV is not in standby mode. Check the mains plug and all mains connections. Why is there a picture but no sound? Check the volume has not been turned down or that sound mute has not been selected. What can cause a poor picture? Interference or a weak signal. Try a different TV station.
Q A Q A and Why doesn't the Media Browser feature operate? Make sure that USB memory is connected correctly. Incorrect behaviour may occur with a USB Hub connection. Why is the digital channel locked? Parental control is activated. Check parental settings.
If you wish to view the advanced functions but do not have access to a computer or the internet then please contact your nearest owner's manual Helpline number from the numbers shown below.
