Manual

UnMcking programs temporarily
1. If'you try to watch a TV program that exceeds the rating limits
you set, the IV enters program lock mode, Af}ei 4 seconds_ the
TV starts the auto f_worite channel search ftmction (see page 38).
_)u can either unlock the program temporarily (see steps 2-4) or
select a non-locked program to watch.
After 4 seconds
THIS PR<_¢RAM HASBEEN BLOCKED_
T_PG • V
EXCEEDS SET •l M _T9
CABLE 9
<>
2. To temporarily unlock the program, press MUTE.
3. Press the Number buttons (0-9) to enter your 4-digit PIN code.
BLOC;KING ACTIVE
ENTER PIN ()ODE
TO TEMPORARILY UN BLOCK
0 9:TO SELECT ENTER:TO SET
4. Press ENTER.
If"the correct code is entered, the program lock mode is released
and the normal picture appears.
All locking is disabled until the TV is turned of}',and will be
enabled when the TV is turned on again.
LocMng channels
With the CH LOCK feature, you can lock specific channels. The TV
will not be able to tune locked cimnnels with the Cimnnel A IV
buttonsorChamle[Number butrom;,unlessyouclearthe.'_etthlD
You can lock a maximum of"nine channels.
To lock channels:
1. From the LOCKS menu, press A or Y to highlight CH LOCK,
and then press ENTER.
CH LOCK menu appears, and CH INPUT will be higiJighted.
2. Press the Channel Number buttons to enter the channel you
want to lock.
3. Press ENTER.
Channel
Number
ENTER
MUTE
LOCKS menu
LOCK9
_FTp
_T%_cg
_9"_P F_DE-
@: MOVE _ ]_:gTART
CLEAR ALL
LOCKS MENU
OH LOOK
CLEAR AL•
• OCKS MENU
(_ _:SEEECT _ _:SET
4. Repeat steps 2 and 3 f'or other channels.