Manual

Locking video inputs
With the VIDEO LOCK feature, you can lock out the input sources
(Vide() 1, Video 2, \ride() 3, ColorStream HD 1, ColorStream HD2,
HDMI) and channels 3 and 4.
You will not be able to select the input somces with the TV/VIDEO
button or Cl_annel buttons unless you clear the setting.
To set up the vide() lock:
1. From the LOCKS menu, press A or V to lflghlight VIDEO
LOCK, then press ENTER.
2. Press A or V to highlight the level of'video locking you want
(Video, Video+, or Oft), as f'ollows:
VIDEO : Locks Video 1, Video 2, Video 3, ColorStream HD1,
HD2 and HDMI.
VIDEO+ : Locks Video 1, Video 2, Vide() 3, ColorStream,
HD1/HD2, HDMI and channels 3 and 4. This
option should be used if'you use the antenna terminal
to play a video tape.
OFF
Note: Make sure the POP/s not on channel 3 or 4.
: Unlocks all video input sources.
ENTER
LOCKS
v CHI P
iiiiiiiiiiiiiii
BIEVV P I N CODE
@: MOVE _t-l_[ E'_ : SET
3. Press ENTER.
Changing the PIN code
1. From the LOCKS menu, press A or Y to highlight NEW ][)IN
CODE°
2. Press the Number buttons (0-9) to enter a 4-digit code.
The numbers you enter will replace the dashes in the display.
LOCKS
V CHIP
CH LC)CK
V I DEO LOCK H : i !_DEO
1_ _ q : .q E L E OT NJ [E :: 9 E •
3. Press ENTER.
The new PIN code is now active.
= Number
ENTER