Integrated High Definition LCD Television 42SL417U 46SL417U 55SL417U For an overview of steps for setting up your new TV, see page 11. Note: To display a High Definition picture, the TV must be receiving a High Definition signal (such as an over-the-air High Definition TV broadcast, a High Definition digital cable program, or a High Definition digital satellite program). For details, please contact your TV antenna installer, cable provider, or satellite provider.
Dear Customer, Thank you for purchasing this Toshiba LCD TV. This manual will help you use the many exciting features of your new LCD TV. Before operating your LCD TV, please read this manual completely, and keep it nearby for future reference. Safety Precautions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
Important Safety Instructions 1) 2) 3) 4) Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Ensure that the TV is not hanging over the edge of the supporting furniture. • Never place the TV on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the TV to a suitable support • Never stand the TV on cloth or other material placed between the TV and supporting furniture. The TV may drop or fall off which may cause an injury or damage. 26) Always place the TV on the floor or a sturdy, level, stable surface that can support the weight of the unit.
volatile compounds such as insecticide on the TV surface. Such products may damage or discolor the TV. 38) Never hit, press, or place anything on the back cover. These actions will damage internal parts. 47) If you have the TV serviced: • Ask the service technician to use only replacement parts specified by the manufacturer. • Upon completion of service, ask the service technician to perform routine safety checks to determine that the TV is in safe operating condition.
USA - Federal Communications Commission Statement FCC Compliance Statement 1. Remove the four screws. (Do not use these for attaching a wall bracket.) 2. Place the four spacers (supplied). Screw Wall bracket Spacer (supplied) TV back panel Removing the Pedestal Stand 1) Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket. Leave the stand protruding over the edge of the surface.
Canada - Industry Canada Statement ENERGY STAR® User Information This device complies with RSS-210. ENERGY STAR User Information Statement: the factory default settings of this television meet ENERGY STAR® requirements. Enabling or changing certain features and functionality (e.g. Picture Settings, Auto Brightness Sensor) may increase energy consumption, possibly beyond the limits required for ENERGY STAR qualification.
Trademark Information • Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are registered trademarks of Dolby Laboratories. • Audyssey Dynamic Volume® controls volume levels to eliminate loud spikes and raise soft dialog for more enjoyable television and movie viewing. Audyssey EQ® provides clear, accurate and natural sound right out of the box. Together, these technologies ensure you enjoy your audio experience as much as your video.
Contents Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . 3 Installation, Care, and Service . . . . . . . . . . . . . . . . . . . . . 3 Choosing a location for your LCD TV . . . . . . . . . . . . . . . . . 5 Chapter 1: Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . .11 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Overview of installation, setup, and use . . . . . . . . . . . . 11 Front panel control . . . . . . . . . .
Selecting stereo/SAP broadcasts . . . . . . . . . . . . . . . . 52 Adjusting the audio balance . . . . . . . . . . . . . . . . . . . . 53 Adjusting the range . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Selecting the optical audio output format . . . . . . . . . 53 Using the Dolby® Digital Dynamic Range Control feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Using Audyssey Dynamic Volume® . . . . . . . . . . . . . 53 Using advanced sound features . . . . . . . . .
Chapter 1: Introduction Features •Integrated digital tuning (8VSB ATSC and QAM) eliminates the need for a separate digital converter set-top box (in most cases). •1080p output resolution. •Four HDMI® digital, High-Definition Multimedia Interfaces with 1080p input support (- p. 16). •HDMI capabilities ARC (Audio Return Channel) enables the audio signal of the TV to be sent to an AV amplifier via an HDMI cable. HDMI INSTAPORT™ technology reduces lag time when switching HDMI sources.
Chapter 1: Introduction Front panel control Examples show Model 42SL417U. Touch key function: TV front Remote Sensor Effective range: 16.4 ft (5m) Service LED Touch Sensor Power LED (- p. 72) (- p. 72) Brightness Sensor This sensor will detect the ambient light conditions to optimize the backlighting levels (- p. 50). – These are available when touched. • POWER – To turn the TV on and off. • B b – To change the channel. When a menu is onscreen, these keys function as up/down menu navigation buttons.
Chapter 1: Introduction Bundling the cables Install the cable clamps and bundle the cables in them.
Chapter 2: Connecting your TV Overview of cable types Before purchasing cables, know the connector types your devices require. You can purchase cables from most stores that sell audio/video devices. Optical audio cable Connects receivers with Dolby Digital or PCM (pulsecode modulation) optical audio input to the TV’s DIGITAL AUDIO OUT terminal (- p. 18). Analog RGB (15-pin) computer cable Coaxial cable (F-type) (F-type) Connects your antenna, cable TV service, or cable converter box to your TV.
Chapter 2: Connecting your TV Connecting to a Satellite dish, an Antenna, or Cable TV Satellite receiver with component video Y AUDIO OUT PR COMPONENT VIDEO Satellite IN Satellite dish PB TV back panel L VIDEO OUT R Standard audio cable Component video cable AV adapter cable (supplied) Component adapter cable (supplied) VHF/UHF Antenna Coaxial cable Cable box CH 3 CH 4 IN OUT Cable TV You will need: •Coaxial cables •AV adapter cable (supplied) •Standard audio cable •Component adapter cabl
Chapter 2: Connecting your TV Connecting an HDMI® or DVI device to the HDMI input HDMI device TV back panel HDMI OUT HDMI cable DVI device Analog audio cable DVI/HDCP OUT OUT L R AUDIO HDMI-to-DVI adapter cable The HDMI input on your TV receives digital audio and uncompressed digital video from an HDMI device, or uncompressed digital video from a DVI (Digital Visual Interface) device.
Chapter 2: Connecting your TV Connecting a VCR or DVD player with ColorStream® (component video) Y Yellow R W White Red VCR G TV back panel B Green Blue DVD player VIDEO Y COMPONENT VIDEO AUDIO L R W R Y G B R Light green AUDIO OUT L PR PB R R W AV adapter cable (supplied) Standard audio cable Light yellow R W Component video cable Light yellow R B Y G Standard A/V cable Component adapter cable (supplied) W AV adapter cable (supplied) R You will need: •Standard A
Chapter 2: Connecting your TV Connecting a digital audio system The TV’s DIGITAL AUDIO OUT terminal outputs a Dolby® Digital or 2-channel down-mixed PCM (pulsecode modulation) signal for use with an external Dolby Digital decoder or other external audio systems with optical audio input. You will need: •Optical audio cable (Use an optical audio cable that has the larger TosLink connector, not the smaller mini-optical connector.
Chapter 2: Connecting your TV Using the TV remote and HDMI® CEC Control to control other devices To control the basic functions of connected audio/video devices using the TV’s remote control, connect an HDMI® CEC compatible audio receiver or playback device. The HDMI® CEC Control feature uses CEC technology as regulated by the HDMI standard. Playback device (HDMI® CEC DVD player,etc.) Audio receiver TV back panel HDMI cable HDMI OUT HDMI OUT HDMI IN Playback device (HDMI® CEC DVD player,etc.
Chapter 2: Connecting your TV Signal names for mini D-sub 15-pin connector Connecting a PC Pin No. Signal name Pin No. Signal name Pin No. Signal name You can view your PC’s display on the TV and hear the sound from the TV’s speakers.
Chapter 2: Connecting your TV Connecting to a home network The LAN port allows your Toshiba TV to connect to your home network. You can use this home network to access photos, movies, and music files that are stored on a DLNA CERTIFIED™ Server and play them on your TV.
Chapter 3: Using the remote control Controlling other devices Installing batteries The TV’s remote control can operate other devices such as cable converter boxes, satellite receivers, VCRs, DVD players, and HTIBs (home theater in a box). 1 Pull up to open the cover. 2 Install two AA size batteries. Toshiba devices: The remote is programmed to operate a variety of devices (- p. 79). Non-Toshiba devices or Toshiba devices that the remote control is not programmed to operate: Program the remote (- p.
Chapter 3: Using the remote control Learning about the Remote Control The buttons described in this section operate the TV only. For the HDMI® CEC Control functions, see “Using HDMI® CEC Control” (- p. 39). For a complete list of the remote’s functions, see “Remote control functional key chart” (- p. 77–78). Changes the picture mode to Game when the input mode is ColorStream HD, PC, Video, or HDMI® (- p. 48). Turns the TV on and off. Freezes the picture (- p. 47).
Chapter 4: Initial Setup and Menu 5 Initial Setup ANT/CABLE To select Antenna: When you first turn on or reset the TV, the Initial Setup window will appear. Note: • You can stop Initial Setup by pressing . However, if you do not finish Initial Setup, the Initial Setup screen will appear every time you turn on your TV. To finish Initial Setup, see “Changing Initial settings” (- p. 28). • does not work until Menu Language, Time Zone, and Location have been set.
Chapter 4: Initial Setup and Menu 6 Start Scan Navigating the menu system Auto Tuning •To open the main menu, press control or TV control panel. Start Scan Press OK on the remote . Note: If you want to stop scanning, press scanning. while • After scanning is complete, a channel list screen (such as the one below) will appear. Press . OK or Auto Tuning (Antenna) Timer Wallpaper Antenna Channels Found: Ch. 2 4-1 4-2 6 11 13 18 31 Type ATV DTV DTV ATV ATV ATV ATV ATV 14 RF Ch.
Chapter 4: Initial Setup and Menu Main menu layout 1st Layer 2nd Layer 3rd Layer Page Settings APPLICATIONS Widgets 62 NET TV 60 Media Player 64 Channel Browser 32 33 To open the main menus (illustrated below), press on the remote control or TV control panel.
Chapter 4: Initial Setup and Menu 1st Layer 2nd Layer 3rd Layer Page Settings SETUP Menu Language 28 ANT/CABLE In 28 Auto Tuning 28 Manual Tuning 29 TV Settings 28, 29, 32, 35, 38 Quick Setup 28 Location 28 Software Upgrade 60 Software Licenses 60 System Information 44 Reset TV 44 Quick menu Quick menu helps you access some options more quickly. Press QUICK to display the Quick menu and press B or b to select an option.
Chapter 5: Setting up your TV Location How to navigate the menu: > Settings > Main menu > Submenu > Format OK Description Press the MENU button. You can select Home or Store for the TV location. For normal home use, select Home. 1 2 > Settings > SETUP > Location. Press C or c to select Home. Press . Settings Press C or c to select Settings. Press C or c to select a menu icon (PICTURE, SOUND, APPLICATIONS, PREFERENCES, SETUP) ANT/CABLE IN > Main menu > Submenu Press B or b to select a menu.
Chapter 5: Setting up your TV 1 2 > Settings > SETUP > Auto Tuning > OK . A confirmation screen appears. Press OK to start Auto Tuning or to abort. The TV cycles through all the channels and stores all active channels in memory. To view the programmed channels, press CH or CH . Manual Tuning Skipping channels To prevent a channel from being viewed, you can set it to be skipped. 1 2 > Settings > SETUP > TV Settings > OK . Press B or b to select Channel Options. Press The list of channels appears.
Chapter 5: Setting up your TV Labeling channels Configuring shared inputs You can label analog TV channels. 1 2 > Settings > SETUP > TV Settings > OK . Press B or b to select Channel Options. Press The list of channels appears. Side Shared Audio OK . Channel Options Ch. Type Label 5-1 3 4 5 6 ATV 6-1 DTV 8 ATV 9 ATV 10 ATV 11 ATV 12 ATV Press B or b to select a channel to label. Press OK . The Software Keyboard window appears. Input a name using the Software Keyboard (- p. 59).
Chapter 5: Setting up your TV Setting the Auto Input feature You can change TV inputs using the MODE SELECT buttons on the remote control: TV, CABLE/SAT, BD/ DVD, AUX. After setting an input for a specific MODE SELECT button, the TV automatically switches to the input when you press and hold the MODE SELECT button for about 3 seconds and release it.
Chapter 6: Basic features Using the Channel Browser™ Tuning channels Setting the Channel Tuning Mode You can select how tuning is handled for analog and digital channels when the TV is in Antenna mode. Note: To use this feature, ANT/CABLE In must be set to Antenna (- p. 28). 1 2 3 > Settings > SETUP > TV Settings > OK . Press B or b to highlight Channel Tuning Mode. Mode Description Standard You can tune both analog and digital channels normally.
Chapter 6: Basic features Favorites Browser Elements of the Channel Browser™ You can quickly create a favorite channels/inputs list that is integrated into the Channel Browser™.
Chapter 6: Basic features Using Channel Return You can switch between two channels without entering a channel number each time. This feature also works for external inputs. 1 2 3 Select the first channel you want to view. Select a second channel using the Channel Number buttons (and the dash ( - ) button if needed). Each time you press CH RTN , the TV switches back and forth between the last two channels that were tuned.
Chapter 6: Basic features Using closed captions To turn on the closed caption mode: 1 2 3 4 > Settings > SETUP > TV Settings > OK . Press b or B to select Closed Captions Settings. Press OK . Press b or B to select Closed Captions. Press C or c to select On. Note: If Closed Captions is set to Off, Analog CC Mode and Digital CC Settings will be not available. Note: A closed caption signal may not display when a videotape is dubbed, signal reception is weak, or signal reception is non-standard.
Chapter 6: Basic features Setting the PIN code Using parental controls A PIN code is necessary for some menus. Note: The Parental Control and Locks menu is grayed out if no PIN has been set. Entering a new PIN code 1 > Settings > PREFERENCES > PIN Setting > . Use the number buttons to enter a 4-digit number. Confirm the code. OK 2 Note: The PIN code cannot be set to “0000”. Changing or deleting your PIN code 1 > Settings > PREFERENCES > PIN Setting > .
Chapter 6: Basic features Downloading an additional rating system Rating system Independent rating system for broadcasters In the future, an additional rating system may become available for use in selectively blocking TV programs and movies. Ratings Description and Content themes Note: The currently tuned station must be receiving a digital signal before an additional rating system can be downloaded.
Chapter 6: Basic features Indication other than rating system Display Description NONE The program is rated None. (No rating appears) No rating information is provided. Note: • If you place an “5” in the box next to “Rated “None””, programs rated “None” or “Not Rated” will be blocked; Programs that do not provide any rating information will not be blocked.
Chapter 6: Basic features Setting a time limit for games GameTimer® You can use the to set a time limit for playing a video game. When the time expires, the TV locks all external inputs. 1 2 3 4 5 > Settings > PREFERENCES > Parental Control and Locks > O K . (Another: > Timer > GameTimer > O K .) Enter your 4-digit PIN code. Press B or b to select GameTimer. Press C or c to select 30, 60, 90, or 120 minutes. To cancel the timer, select Off.
Chapter 6: Basic features Controlling HDMI® CEC playback devices With your TV’s remote control, you can control the connected HDMI® CEC playback device (DVD player, etc.) you are watching. Power Turns the selected device on and off. Root Menu Accesses the selected device’s top menu. Begins playback. Contents Menu Accesses the contents list when you press OK . Stops playback. Setup Menu Accesses the device’s setup menu. Description Skips forward. Skips backward. Fast-forwards. Rewinds/reverses.
Chapter 6: Basic features Adjusting the amplifier’s audio Using the TV’s remote control, you can adjust or mute the sound volume of your amplifier. • VOL VOL adjust the volume level. • turns off the sound. Note: This feature is available when Amplifier Control is set to On. 1 2 3 Using the HDMI® settings feature Note: If some HDMI legacy sources do not work properly with your HDMI TV, set INSTAPORT™ to Off. Adjusting this setting should allow your HDMI legacy source to operate properly with your TV.
Chapter 6: Basic features Using your PC with the TV Setting the timer to turn on the TV Adjusting the image You can set the on timer to turn on the TV to a preset channel or input at a preset time. If the edges of the picture are hidden, readjust Horizontal Position and Vertical Position. If the picture is affected by interference, readjust Clock Phase and Sampling Clock. To activate the timer: 1 2 3 4 5 1 > Settings > APPLICATIONS > On Timer > . (Another: > Timer > On Timer > OK .
Chapter 6: Basic features Setting the sleep timer Setting Automatic Power Down You can set the TV to turn off after a specific amount of time (maximum = 12 hours). The TV can be configured to automatically turn itself off after 4 hours if you do not operate the TV either from the remote control or the TV control panel. Using the remote control: 1 2 Press [ Set the time until the TV turns off. • Repeatedly press [ to increase the time. • Press B or b to increase or decrease the time.
Chapter 6: Basic features Displaying TV status information Viewing support information To display TV status information: Press Q. The following information will be displayed (if applicable): •Current input (ANT/CABLE, Video, etc.) •Either “CABLE” (for cable TV) or “ANT” (for overtheair broadcasts), if ANT/CABLE is the current input.
Chapter 7: Picture and sound controls Selecting the picture size You can view many program formats in several picture sizes—Native, 4:3, Full, TheaterWide 1, TheaterWide 2, TheaterWide 3, Normal, and Dot by Dot. Note: The picture size illustrations are examples only. The format of the image (in any of the picture sizes) depends on the format of the signal you are currently watching. Select the picture size that displays the current program in the way that looks best to you.
Chapter 7: Picture and sound controls Picture Size Native (for 480i (HDMI), 480p (HDMI), 720p, 1080i, and 1080p signal programs) • If receiving a 1080i, 1080p, 720p, 480i (HDMI), or 480p (HDMI) signal program, the video is scaled to display the entire picture within the borders of the screen (i.e. no overscanning). • This is especially useful for external HD sources such as DVHS movies, Video Games, or PC graphics. • None of the picture is hidden.
Chapter 7: Picture and sound controls Scrolling the picture Using the 4:3 Stretch If the edges of the picture are hidden, you can adjust the image’s position. When 4:3 Stretch is activated, the TV displays 4:3 programs as a full-screen picture. Note: • You can adjust the picture position when the picture size is set to TheaterWide 2 or TheaterWide 3. • When viewing DTV, NET TV, or Media Player, this feature is not available. Note: This feature is available when Auto Aspect is set to On.
Chapter 7: Picture and sound controls Adjusting the picture Adjusting the picture quality The adjustments you make to picture quality under a picture mode are saved to that picture mode. Selecting the picture mode Selection Pressing C Pressing c You can select your desired picture settings from the modes described below.
Chapter 7: Picture and sound controls Using the advanced picture settings features Note: Some of the Advanced Picture Settings features will not be available for adjustment when the Picture Mode is set to AutoView. Edge Enhancer The Edge Enhancer feature lets you adjust the levels for your desired picture settings and achieve a sharper picture. DynaLight™ The DynaLight™ feature automatically strengthens the black coloring of dark areas in the video according to the level of darkness.
Chapter 7: Picture and sound controls ClearFrame™ Auto Brightness Sensor The ClearFrame 120 Hz anti-blur technology doubles the frame rate from 60 frames per second to 120 frames per second, virtually eliminating motion blur without adding flicker or reducing image brightness. When the Auto Brightness function of Auto Brightness Sensor Settings is set to On, the TV optimizes the backlighting levels to suit ambient light conditions. 1 2 3 > Settings > PICTURE > Advanced Picture Settings > O K .
Chapter 7: Picture and sound controls ColorMaster™ The ColorMaster™ feature allows you to adjust standard colors. 1 2 > Settings > PICTURE > Advanced Picture Settings > O K . Press B or b to select ColorMaster, press C or c to select On. Press . Base Color Adjustment When ColorMaster™ is set to On, the list of base colors appears. You can select a base color to adjust. 1 2 3 4 5 6 > Settings > PICTURE > Advanced Picture Settings > O K . Press B or b to select Base Color Adjustment. Press OK .
Chapter 7: Picture and sound controls Setting Type Adjusting the audio You can adjust the white balance setting. 1 2 3 4 > Settings > PICTURE > Expert Picture Settings > O K . Press B or b to select White Balance. Press OK . Press B or b to select 2P White Balance. Press OK . Press B or b to select Red-Offset, Green-Offset, Blue-Offset, Red-Gain, Green-Gain, or BlueGain. Press C or c to adjust. Press . This feature copies White Balance on the current input to all other inputs.
Chapter 7: Picture and sound controls Using the MTS button If you press when an analog channel is tuned: •The Analog Audio bar will appear and display Stereo, SAP, Mono as the options. If you press when a digital channel is tuned: •The Digital Audio bar will appear and offer different audio choices for the digital channel. If you press when an external input is selected: •No Audio bar is displayed. Adjusting the audio balance You can adjust the audio balance. 1 2 > Settings > SOUND > Balance.
Chapter 7: Picture and sound controls Using advanced sound features Using surround sound Voice Enhancement and Dynamic Bass Boost help to create a thrilling surround sound experience with deep, rich bass from stereo sound sources. Your TV’s audio will sound fuller, richer, and wider. Note: Surround features are only available for Stereo mode (- “Selecting stereo/SAP broadcasts” on p. 52). 1 2 > Settings > SOUND > Advanced Sound Settings > O K . Press b or B to highlight the feature to adjust.
Chapter 8: Advanced features Using your home network •This TV is a DLNA CERTIFIED™ Player. It can play digital content stored on a DLNA CERTIFIED™ product with server functions. If you want to use this TV as a DLNA CERTIFIED™ Player, you will have to configure the network settings on your TV (- p. 21). •If you want to use your home network with an Internet connection, you will have to configure the network settings on your TV (- p. 21).
Chapter 8: Advanced features Setting up the Network Easy Setup using a PIN (Personal Identification Number) You can select the Network Type. 1 1 2 3 4 > Settings > PREFERENCES > Network Setup > O K . (Another: > Network > Network Setup > OK .) Press B or b to highlight Network Type. Press C or c to select Wired or Wireless. If you select Wired, see “Advanced Network Setup” (- p. 58). If you select Wireless, see the next section.
Chapter 8: Advanced features Manual Setup Wireless Information 1 The settings configured in Wireless Setup can be confirmed. 2 3 4 5 6 7 > Settings > PREFERENCES > Network Setup > O K . Press B or b to select Wireless Setup. Press OK . Press B or b to select Manual Setup. Press OK . Press B or b to select Network Name. Press OK . The Software Keyboard window appears. Input the Network Name using the Software Keyboard (- p. 59). To save your settings, press the BLUE button.
Chapter 8: Advanced features Advanced Network Setup DNS Setup Note: • When the DHCP function of the router connected to this TV is On, you can set Auto Setup to On or Off. (Usually set it to On.) • When the DHCP function of the router is Off, set Auto Setup to Off, and manually set the IP Address or DNS Address. Note: • When the DHCP function of the router connected to this TV is Off, set Auto Setup to Off, and manually set the DNS address(es).
Chapter 8: Advanced features Network Connection Test This function checks Internet connectivity. 1 2 > Settings > PREFERENCES > Network Setup > O K . Press B or b to select Network Connection Test. Press OK . Note: A message will appear to indicate whether the connection was successful or not. Note: Favorable Network Connection Test results do not guarantee an Internet Connection. Depending on the situation, some Internet features may not be available.
Chapter 8: Advanced features Performing a Software Upgrade Using the NET TV™ feature TOSHIBA may offer upgrades for the TV's software in the future. The TV's software is upgraded via Internet connection. Note: • You need to connect to the Internet before using this feature (- p. 21). • Services may not be currently available in your area. • User registration or login may be required to use some services. • is not available while using the NET TV feature.
Chapter 8: Advanced features Netflix YouTube™ Watching movies with Netflix YouTube is a video-sharing service managed by YouTube, LLC. This TV allows you to view YouTube video content. 1 2 3 Press (S Step 3) or press . (From the Menu: > Network > NET TV > Press C or c to select Netflix icon. Press O K . Follow the onscreen instructions. OK .) After having activated Netflix player and prepared Instant Queue, movies and TV episodes in your Instant Queue will appear on the TV screen.
Chapter 8: Advanced features CinemaNow Yahoo!® TV Widgets CinemaNow is an on-demand service that offers high definition movies on the Web. Yahoo!® TV Widgets provide an integrated Internet and TV experience powered by the Yahoo! Connected TV platform. Yahoo!® TV Widgets allow you to: •Track your stocks and stay current with financial news. •Share photos with friends and family. •Watch your favorite web videos. 1 2 Press . (From the Menu: > Network > NET TV > Press C or c to select CinemaNow.
Chapter 8: Advanced features Button Description RED Closes the widget. GREEN Changes the widget’s settings. YELLOW Adds or deletes a snippet. BLUE Resizes the video to fit onscreen, or to make it fullscreen. To close Yahoo!® TV Widgets: Press . Note: To use Yahoo!® TV Widgets you must first complete the “Guided Setup” (- p. 60). Using the Profile Widget •The Profile Widget configures your user profile. •You can set up multiple profiles for multiple users.
Chapter 8: Advanced features Using the Media Player This TV allows you to access photos, movies, and music files stored on a USB device. Moreover, you can also access photos, movies, and music files from your TV or PC by connecting the TV to your home network. Term meaning: DMP: DLNA CERTIFIED™ Player DMS: DLNA CERTIFIED™ Server •DMP: The TV can control and play content on a DMS. – DMS is a device with server functions that stores media content for playback on a DMP.
Chapter 8: Advanced features Using Media Player with DLNA CERTIFIED™ Server Viewing Movie files You need to configure a home network before using this feature (- p. 21). Basic Playback: 1 1 2 3 > Settings > APPLICATIONS > Media Player > OK . (Another: > Media Player > O K .) Press B or b to select Photo, Movie, or Music. (When Another in Step 1, press C or c to select Photo, Movie, or Music.) Press OK . The thumbnail (for Photo) or list of files (for Movie and Music) appears.
Chapter 8: Advanced features To set the repeat mode: 1 2 3 Press QUICK . The current repeat setting appears. Press C or c to select Off, All, or 1. Press . The setting is effective until the TV is turned off. Mode The content is played back only once. All Contents in the same folder are repeatedly played back. 1 The same content is repeatedly played back. To display the file status information: 2 Press Q during playback. The information will be displayed at the bottom of the screen.
Chapter 8: Advanced features To set the repeat mode: 1 2 3 Press QUICK . The current repeat setting appears. Press C or c to select Off, All, or 1. Press . The setting is effective until the TV is turned off. Mode Description Off Contents in the same folder are played back once. All Contents in the same folder are repeatedly played back. 1 The same content is repeatedly played back. To display the file status information: 1 2 Press Q during playback.
Chapter 8: Advanced features To set the mode settings: To display file status information: 1 1 2 3 4 Press QUICK to open the Quick menu while in Single View mode or Slideshow mode. Press B or b to select the item (SOUND, Interval Time, Repeat, Background Music, or Speakers). Press C or c to adjust the setting. Press to return to Single View mode or Slideshow mode. 2 Press Q. The information will be displayed at the bottom of the screen. Press Q again to hide the information.
Chapter 8: Advanced features Using the Wallpaper feature This feature allows you to display a photo file stored on the TV. •Only one photo file can be stored on the TV. •The photo file can be overwritten with a file from an external device (USB, DMS). 1 2 > Settings > PREFERENCES > Wallpaper Setup > O K . (Another: > Wallpaper > O K .) The preview screen will appear. Press c to select Start. Press O K . Auto Power Off 1 2 3 > Settings > PREFERENCES > Wallpaper Setup > OK . The preview screen appears.
Chapter 9: Troubleshooting General troubleshooting • Check the Input mode when you use Shared Inputs (- p. 30). • Adjust the Tint and/or Color (- p. 48). Before calling a service technician, please check this chapter for a possible cause of the problem and some solutions you can try. Poor composite picture Black box onscreen Picture and sound are out of sync • The closed caption feature is set to one of the Text modes (T1, T2, T3, or T4). Set the closed caption feature to Off (- p. 35).
Chapter 9: Troubleshooting • The Auto Tuning feature may have erased the channel from memory. Add the channel to the channel memory (- p. 28). • The Lock feature may have blocked the channel. Unblock the channel (- p. 38). • If you cannot tune digital channels, check the antenna configuration (- p. 28). If the problem persists, clear all channels from the channel list and reprogram channels into memory (- p. 28). If the problem persists, use the Reset Factory Defaults procedure (- p. 44).
Chapter 9: Troubleshooting Wireless network problems • Check that the router/AP (Access point) power is ON. • After starting wireless network setup, confirm that the network is configured properly by performing the network connection test (- p. 59). • Check the router/AP’s connection status (- p. 57). • If the router/AP does not support PBC or WPS, Easy Setup (PBC) will not work even if the push-button is pressed.
Chapter 10: Appendix Specifications Note: • This model complies with the specifications listed below. • Designs and specifications are subject to change without notice. • This model may not be compatible with features and/ or specifications that may be added in the future.
Chapter 10: Appendix Supplied Accessories • Easy Setup Guide • Pedestal assembly installation manual • Stop/Quick set up guide • Remote control with two “AA” size batteries • Mounting screw Use this screw to secure the TV. See item 26 on p. 4. • Securement Clip Use this clip to attach the TV to a wall stud, pillar, or other immovable structure. See item 26 on p. 4 and instructions on p. 5. • Tool set • Four spacers Use these to attach a wall bracket. See p. 5 and 6.
Chapter 10: Appendix Acceptable signal formats for PC IN and HDMI terminals PC IN signal formats Note: • The PC IN on this TV only accepts signal formats which are compliant with VESA-DMT as in the table below. Since some PC input signals are different from the resolution and frequency described in the table below, the following problems may occur: incorrect display, false format detection, picture position failure, blur, or judder.
Chapter 10: Appendix HDMI signal formats Note: • The HDMI inputs on this TV only accept VGA, SVGA, XGA, WXGA, and SXGA signal formats which are compliant with VESA-DMT as in the table below. Since some PC, HDMI, or DVI device input signals are different from the resolution and frequency described in the table below, the following problems may occur: incorrect display, false format detection, picture position failure, blur, or judder.
Chapter 10: Appendix Remote control functional key chart REMOTE CONTROL KEY Toshiba TV CABLE SAT (satellite) Blu-ray™ DVD/ DVD-R VCR Reciver/ Amp CD GAME Game --- --- --- --- --- --- --- POWER Power Power Power Power Power Power Power Power FREEZE (TV)Freeze MODE SELECT Remote control device mode selection 1 1 1 1 1 1 1 AV input 1 1 2 2 2 2 2 2 2 AV input 2 2 3 3 3 3 3 3 3 AV input 3 3 4 4 4 4 4 4 4 AV input 4 4 5 5 5 5 5 5 5 CD 5
Chapter 10: Appendix REMOTE CONTROL KEY Toshiba TV CABLE SAT (satellite) Blu-ray™ DVD/ DVD-R VCR Reciver/ Amp CD Page right/ Favorite Browser --- --- --- --- --- --- --- MENU Menu Menu, Cable Menu Menu, Action Menu Top Menu Top Menu --- Menu Menu GUIDE Guide Guide Guide --- --- --- --- --- RETURN Return --- --- Return Return --- --- --- EXIT Exit Exit Exit Clear Clear --- --- --- B/b Menu select up/down Cursor up/down Cursor up/down Cursor up/down C
Chapter 10: Appendix Operating other devices Your TV remote control has one dedicated TV mode and three programmable multi-brand modes: CABLE/ SAT, BD/DVD, and AUX. Note: To operate a non-Toshiba device or a Toshiba device that the remote control is not preprogrammed to operate, you must program the remote. Programming the remote to operate other devices Device code setup 1 Find the code for your device brand in the remote control device code table (- p. 82–87).
Chapter 10: Appendix Searching for a device code To lock the remote’s volume keys to a specific mode: Example: CABLE/SAT mode If you do not know the device code for a particular device, you can view each available code for that device mode and sample the functions to find the code that operates the target device. 1 2 3 4 5 Press a mode select button on the remote. While holding down Q, press 8, 5, 0, 0. The remote control enters program mode. Point the remote at the target device.
Chapter 10: Appendix Operating the TV with combination buttons You can directly operate the TV power, input switch, picture size switch, and picture mode switch by pressing a combination button while holding down a color button.
Chapter 10: Appendix Remote control codes In some cases, you may not be able to operate your device with the TV remote control. Your device may use a code that is not recognized by the TV remote control. If this happens, use the device’s remote control.
Chapter 10: Appendix SCIENTIFIC ATLANTA SIGNAL SIGNATURE SL MARX STANDARD STAR SIGHT STAR TRAK STARCOM STARGATE TANDY TELEVIEW TEXSCAN TIME WARNER TOCOM TOSHIBA TV86 UNIKA UNITED CABLE UNIVERSAL VERIZON VIDEO TECH VIDEOTRON VIDEOWAY VIEWSTAR VISIONTICS ZENITH ZENITH NETWORK 0045, 0063, 0045 0036 0078 0036 0032 0047 0058 0081, 0123 0036 0080 0036 0032 0045 0065, 0062 0049 0086 0033, 0077, 0082, 0124 0081, 0123 0033, 0039, 0077, 0124 0045, 0121 0037 0045 0048 0083, 0075, 0086, 0080, 0122 0057 0050, 0059, 00
Chapter 10: Appendix LITEON MAGNAVOX MARANTZ MEDION MEMOREX MERIDIAN MICROSOFT MINTEK MITSUBISHI MUSTEK MYRON&DAVIS NAD NEC NESA NEXXTECH NORCENT ONKYO OPTIMUS ORION ORITRON PACIFIC PANASONIC PHILIPS PHILIPSMAGNAVOX PIONEER PIVA POLAROID POLK AUDIO PROLINE PROSCAN PROSONIC PROTRON 84 1109, 1118, 1015 1061, 1130, 1117, 1131, 1158, 1177, 1178 1061, 1093, 1130, 1077, 1078, 1157, 1158, 1167, 1176 1015, 1048 1005, 1048 1061 1079 1094 1094, 1034, 1035 1100, 1170 1040 1093, 1167 1093, 1167 1094, 1040 1041
Chapter 10: Appendix SONY SYLVANIA SYMPHONIC TIVO TOSHIBA TRUTECH YAMAHA ZENITH 1084, 1083, 1089 1117 1117 1062, 1125, 1126, 1126 1062, 1061, 1106, 1107, 1108 1063 1018, 1131 1093 DAEWOO DBX DENON DIMENSIA DURABRAND DYNATECH ELECTROHOME ELECTROPHONIC EMERSON VCR Brand Code ACCELE ADMIRAL ADVENTURA AIKO AIWA 2007 2062 2000 2019 2033, 2047, 2001, 2000 2047, 2065, 2041, 2040, 2018, 2017, 2048 2010, 2090, 2033, 2074 2046 2007 2011, 2012, 2021 2033 2007 2024 2003, 2051, 2052, 2005, 2002, 2049, 2081 2033 2
Chapter 10: Appendix NEC NEXXTECH NIKKO NOBLEX OLYMPUS OPTIMUS OPTONICA ORION PANASONIC PENTAX PHILCO PHILIPS PHILIPSMAGNAVOX PILOT PIONEER PORTLAND PROSCAN PROTEC PULSAR QUARTER QUARTZ QUASAR RADIO SHACK RADIX RANDEX RCA REALISTIC 86 2024, 2011, 2012, 2081, 2034, 2050, 2017, 2021, 2020 2042 2033 2007 2046 2033, 2007, 2014, 2033, 2063, 2014, 2062 2007, 2092 2003, 2005 2014, 2014, 2046, 2060 2030, 2021, 2077 2056, 2060, 2047, 2046 2056, 2057, 2088, 2056, 2046, 2089 2056, 2062 2033 2043, 2030, 2011, 20
Chapter 10: Appendix HARMAN KARDON HITACHI INSIGNIA JC PENNEY JVC KENWOOD KRELL LUXMAN LXI MAGNAVOX MARANTZ MCS MGA MISSION MITSUBISHI NAD NEC NEXXTECH NIKKO NSM ONKYO OPTIMUS PANASONIC PHILIPS PIONEER PROTON QUASAR RADIO SHACK RCA REALISTIC ROTEL SAE SAMSUNG 3013 SANSUI 3037 3078 3033, 3000 3008, 3007 3046, 3028, 3027, 3026, 3029, 3028 3043 3031, 3059, 3063, 3066 3000 3043, 3041 3043, 3061, 3057, 3038 3033, 3000 3013 3043 3013, 3012 3067 3033 3050 3022, 3004, 3071 3043 3032, 3068, 3070, 3069 3016,
Chapter 10: Appendix Limited United States Warranty for LCD Televisions Toshiba America Information Systems, Inc. (“TAIS”) makes the following limited warranties to original consumers in the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS LCD TELEVISION AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE. LCD TELEVISIONS PURCHASED IN THE U.S.A. OR PUERTO RICO AND USED ANYWHERE OUTSIDE OF THE U.S.A.
Chapter 10: Appendix THE EXCEPTION OF ANY WARRANTIES IMPLIED BY THE LAW OF ANY STATE OF THE U.S.A. AS HEREBY LIMITED, THE FOREGOING LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, GUARANTEES, AGREEMENTS, AND SIMILAR OBLIGATIONS OF TAIS WITH RESPECT TO THE REPAIR OR REPLACEMENT OF ANY PARTS.
Chapter 10: Appendix that do not provide for direct and immediate access to the product for service purposes. Labour charges for set installation, setup, adjustment of customer controls, and installation or repair of antenna systems are not covered by these warranties. Reception problems caused by inadequate antenna systems are your responsibility. (5) Warranties extend only to material defects in materials or workmanship as limited above, and do not extend to: a.
Chapter 10: Appendix promotional material relating to the Television; (iv) the relationships that result from this warranty, (the foregoing claims, disputes controversies and disagreements are collectively referred to as the “Dispute”), shall be referred to and resolved by final and binding arbitration (to the exclusion of the courts).
Index A Auto Aspect .................................... 47 Auto Input ....................................... 31 Auto Tuning .................................... 28 AutoView®....................................... 48 B Backlight......................................... 48 Backlight Adjustment Pro ............... 50 Base Color Adjustment................... 51 C Channel Browser™ .......................... 32 Channel lock ................................... 38 Channel Return...............................
Corporate Headquarters: 9740 IRVINE BLVD. IRVINE, CA 92618 VISUAL PRODUCTS SERVICE AND SUPPORT: 1420-B TOSHIBA DRIVE, LEBANON, TN 37087, U.S.A. HEAD OFFICE: 191 McNABB STREET, MARKHAM, ONTARIO, L3R 8H2, CANADA MANUFACTURED BY AutoView, ColorStream, GameTimer and TheaterWide are registered trademarks of Toshiba America Information Systems, Inc. Channel Browser, ClearFrame, DynaLight, ColorMaster, NET TV, SurfLock and TheaterLock are trademarks of Toshiba America Information Systems, Inc.