Specifications

10
CONNECTING YOUR TV
English
Connecting an HDMI® device
The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI
source device.
This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) programme material in digital form from EIA/
CEA-861-D–compliant consumer electronic devices (such as a set-top box or DVD player with HDMI output). For acceptable video
signal formats, see page 66.
NOTE: Supported Audio format: Linear PCM, Dolby Digital (AC-3), sampling rate 32/44.1/48kHz.
Connect an HDMI cable (type A connector) to the HDMI terminal.
For proper operation, it is recommended that you use an HDMI cable with the HDMI Logo ( ).
• If your HDMI connection is capable of 1080p and/or your television is capable of refresh rates greater than 50Hz, you will need
a Category 2 cable. Conventional HDMI/DVI cable may not work properly with this model.
• HDMI cable transfers both video and audio. Separate analogue audio cables are not required (see illustration).
To view the HDMI device video, press the
o button to select HDMI 1, HDMI 2, HDMI 3 or HDMI 4 mode.
To connect an HDMI device
HDMI cable
HDMI device
the back of your television