TL9*8 Digital Series TL939 Digital Series
English Contents Setting the auto start mode ..............................................28 Adjusting 2D to 3D Depth ..................................................28 Setting the 3D PIN code ......................................................28 Setting 3D Start Message ....................................................29 Setting 3D Lock ......................................................................29 Setting 3D Timer Lock ..........................................................
TEXT SERVICES Text services ......................................................................................82 Selecting modes ....................................................................82 Text information ....................................................................82 Navigating pages using Auto ............................................82 Navigating pages using LIST .............................................82 Control buttons .....................................................
English INSTALLING YOUR TV DO be careful with glass panels or stands on equipment. Safety Precautions This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products, and some points may not apply to the goods you have just purchased.
INSTALLING YOUR TV English Installation and important information Where to install Locate the television away from direct sunlight and strong lights. Soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen. Place the TV on a stable, level surface that can support the weight of the TV.
English INSTALLING YOUR TV Please take note The digital reception function of this television is only effective in the countries listed in the “Country” section of the “System Setup” menu. Depending on country/area, some of this television's functions may not be available. Reception of future additional or modified services can not be guaranteed with this television.
INSTALLING YOUR TV 16 To access the “TOSHIBA PLACES” Top Page When network is not connected, an error message will be displayed. Simple at-a-glance reference of your remote control.
English CONNECTING YOUR TV Connecting external equipment Before connecting any external equipment, turn off all main power switches. If there is no switch, remove the mains plug from the wall socket. ILLUSTRATION SHOWS 40TL938.
CONNECTING YOUR TV HDMI’s ARC (Audio Return Channel) feature The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI source device. This feature enables the audio signal of the TV to be sent to the AV amplifier via the HDMI cable. It will not be necessary to connect a cable from the audio output of the TV to the audio input of the AV amplifier to reproduce the audio received from the tuner of the TV through the AV amplifier.
English CONNECTING YOUR TV Connecting an HDMI CEC Control compatible device You can control the basic functions of connected audio/video devices using the television’s remote control if you connect an HDMI CEC compatible AV amplifier or playback device. For an explanation of setup and operations, see pages 80–81. the back of your television AV amplifier Playback device Playback device For the setup shown above, you will need three HDMI cables.
CONNECTING YOUR TV With either an HDMI or an RGB/PC connection, you can watch your computer’s display on the television. To connect a PC to the RGB/PC terminal When connecting a PC to the RGB/PC terminal on the television, use an analogue RGB (15-pin) computer cable. the back of your television To connect a PC to the HDMI terminal Computer When connecting a PC to the HDMI terminal on the television, use an HDMI cable (type A connector).
English CONNECTING YOUR TV Connecting a home network The LAN port allows your Toshiba TV to connect to your home network. You can use this revolutionary home entertainment networking system to access photo, video and audio files that are stored on a DLNA CERTIFIED™ server and play/display them on your TV. NOTE: • If you connect to a shared network outside your home, it is advisable to use a router. Always use DLNA CERTIFIED™ products in private network environments.
CONNECTING YOUR TV English Controls and input connections A wide variety of external equipment can be connected to the input sockets on the side of the television. While all the necessary adjustments and controls for the television are made using the remote control, the buttons on the television may be used for some functions. ILLUSTRATION SHOWS 40TL938. USB 1 port Media Player/Wireless LAN adaptor ready for a home network COMMON INTERFACE The Common Interface is for a Conditional Access Module (CAM).
English CONNECTING YOUR TV MENU structure To open the main menu (illustration below) , press MENU on the remote control. Guide Genre Search Setup TV Programmes 1st Layer Library Media Player Toshiba Place Function Press MENU. Programme Timers 2nd Layer Press C c / B. Press C c. 3rd Layer Press OK. Press BbC c.
SETTING UP YOUR TV Before switching on the TV make sure that your aerial is connected and any decoder / media recorder, if applicable is connected and in standby. Press OK, and the Network Type screen will appear. Press C or c to select Wireless. Connection Type Select a connection method. Quick Setup a b c Wired • When you select Wired (LAN cable connection), skip to step 13. Press the 1 button. Toshiba logo will appear. and after that, The Menu Language screen will appear.
English SETTING UP YOUR TV k Press B or b to select Security Key and press OK. Input the Security Key by using the Software Keyboard (page 45). To save your setting, press the BLUE button. This item is grayed out when Encryption is None. In step 9, when you select Assisted Setup; Press OK, and the Assisted Setup screen will appear. Press B or b to select the desired AP and press OK. NOTE: Check the MAC address on the label of the AP or in the manual, and select your AP.
SETTING UP YOUR TV Press OK. If your country supports Network Guide, The Guide Type screen will appear. TV Guide Selection s Press C or c to view the DTV (digital channel) or ATV (analogue channel) lists. T Use B or b to move through the list to select a channel, and then press OK to view. Electronic Program Guide accessed by the “GUIDE” key of your remote control: Select “MediaGuide” if you want to use the advanced rich media EPG provided through the network.
English SETTING UP YOUR TV With the exception of DTV Scan Type and DTV Modulation items, all of the following items will have 2 operating modes. The first is Auto where the values for each item are preset by the system. The second is an Input mode where you will be able to enter a single value in place of the pre-set value. If no channel is currently tuned and the Input state is chosen, a system default value will be shown.
SETTING UP YOUR TV Tuning In the System Setup menu, press b to select ATV Manual Tuning and press OK. System Setup The television can be tuned-in manually using ATV Manual Tuning. For example, you might use the feature if the television cannot be connected to a media recorder/decoder with a SCART lead or when you want to tune-in a station on another System. Menu Language Use C and c to move across the screen and select any of the ATV Manual Tuning options. Then use B or b to adjust the settings.
English SETTING UP YOUR TV g h Each signal will show on the television. If it is not your media recorder, press B or b again to restart the search. When your media recorder signal is found, press c to move along to Station. Use B, b, C and c to put in the required characters, e.g. VCR. Skip To prevent certain channels from being viewed, positions can be skipped. a b ATV Manual Tuning Station 1 I A C 2 0 V C R i Press OK to save. j Repeat for each position you want to tune.
SETTING UP YOUR TV Channels may be moved and saved to the position of your choice. a b NOTE: This feature varies depending on the Ant/Cable In setting. Select ATV Manual Tuning from the System Setup menu. Manual Tuning With the list of channels showing, use B or b to highlight the channel you want to move and press c. ATV Manual Tuning Pos.
English SETTING UP YOUR TV Manual Tuning for DVB-C DTV Settings When Ant/Cable In is set to Cable, DTV Manual Tuning items are as follows: Channels Frequency: Input a specific frequency to be scanned Modulation: Choose from one of five QAM modulation options Symbol Rate: Input a specific baud rate (KS/s) to be used for the manual scan The channel order may be changed to suit your personal preference. a b Select DTV Settings from the System Setup menu and press OK. Select Channels and press OK.
SETTING UP YOUR TV Analogue switch-off channel you wish to move and press OK to check. If you wish to move multiple channels at once, select another channel and check in the same way. Repeat as necessary. Once all desired channels have been checked, press the B or b buttons to place the focus at the position to which you wish to move the channels. The channels will be inserted above the highlighted channel. Press the GREEN button to execute the move.
English CONTROLS AND FEATURES General controls Selecting channels To select a channel, use the numbered buttons on the remote control. Quick Menu Quick Menu helps you access some options quickly, such as Picture Mode, Picture Size, More Information, Sleep Timer etc. Channels can also be selected using PU and Pu. To display on-screen information such as channel, input mode or stereo/mono signal, press . Press again to cancel. Press QUICK to display the Quick Menu and use B or b to select the option.
CONTROLS AND FEATURES English Using 3D functions To set the 3D glasses: Before using 3D programming, see and follow “3D Information” section on page 95. a Viewing 3D programming requires the following: b • TOSHIBA 3D Glasses FPT-AG02G (Not supplied) • Compatible 3D playback device or 3D source • 3D capable high quality HDMI cable When you use for the first time, peel off the protective films from the lenses. Peel off Turn the 3D glasses on with the power switch.
English CONTROLS AND FEATURES Viewing 3D images Switching display mode or selecting 3D format Incoming video signals can either be in 2D or 3D format. A 2D signal can be viewed in either 2D or 3D, and 3D can be viewed in either 2D or 3D. If the TV can detect the fact that a signal is 3D, it can change to 3D mode automatically – see “Setting the auto start mode” (on page 28). Otherwise you can change the viewing mode using the 3D button.
CONTROLS AND FEATURES To select 2D format from the Quick menu in 2D mode: a Press QUICK to display the Quick Menu. a Press QUICK to display the Quick Menu. b Press B or b to select 3D Settings and press OK. b Press B or b to select 3D Settings and press OK. c Press B or b to select 3D Format Select and press OK. c Press B or b to select 2D Format Select and press OK. d Press C or c to select 3D (SBS) or 3D (TB). d Press C or c to select Native, Side by Side (SBS) or Top and Bottom (TB).
English CONTROLS AND FEATURES NOTE: Depending on the content, setting the 3D effect to a high level may result in blurring of the image contours and background. Setting the auto start mode Controls what the TV does when it detects a 3D signal. a Press MENU / C c to highlight Setup icon. b Press B / C c to highlight Preferences icon and press OK. c Press B or b to select 3D Setup and press OK.
CONTROLS AND FEATURES Setting Enable 3D Timer When this feature is set to On, a message is displayed onscreen when a 3D signal is received. This feature helps to remind you not to watch 3D video for extended periods of time. Once a set period of time has passed, a dialogue will be shown asking you if you wish to continue viewing or not. a b In the Preferences menu, press B or b to select 3D Setup and press OK. Press B or b to select 3D Safety Settings and press OK.
English CONTROLS AND FEATURES Sound controls Voice Enhancement Voice Enhancement emphasises the frequency range of the speaker’s voice, making it easier to catch what they are saying. Volume controls and sound mute Volume Press 2+ or 2– to adjust the volume. Sound Mute Press once to turn the sound off and again to cancel. a In the Advanced Sound Settings menu, press B or b to select Voice Enhancement. b Press C or c to select On or Off.
CONTROLS AND FEATURES English Audio Level Offset Headphone Settings Sometimes there can be large changes in volume when switching from a DTV 5.1ch to a DTV 2ch, an ATV channel, or an external input. Using the Audio Level Offset feature reduces these volume differences. This setting is used to set the sound output when headphones are connected. a b Speaker Link Set the volume level usually used when watching a DTV 5.1ch programme. Tune to a channel which is DTV 2ch, ATV or an external input.
English CONTROLS AND FEATURES Widescreen viewing Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats. WIDE 4:3 Use this setting when watching a widescreen DVD, widescreen video tape or a 16:9 broadcast (when available). Due to the range of widescreen formats (16:9, 14:9, 20:9 etc.) black bars may be visible on the top and bottom of the screen. Use this setting to view a true 4:3 broadcast.
CONTROLS AND FEATURES English NATIVE This setting will show the picture without overscan, i.e. WYSIWYG. PC NORMAL This setting will show the picture without overscan, i.e. WYSIWYG. This option is only available when watching a PC signal source via HDMI or PC terminal. PC WIDE This setting will show the picture without overscan or side panels. This option is only available when watching a PC signal source via HDMI or PC terminal. Dot by Dot Press the “Dot by Dot” is a non-scaling display.
English CONTROLS AND FEATURES Picture controls Picture preferences You can customize current picture mode settings as desired. For example, while selecting “Dynamic”, if you change the following items, such as Backlight, Contrast, Brightness, Colour, Tint, Sharpness and the Advanced Picture Settings items, your new settings are saved for “Dynamic” picture mode. Most of the picture controls and functions are available in both digital and analogue modes.
CONTROLS AND FEATURES Auto Brightness Sensor The Base Colour Adjustment feature allows the adjustment of individual colours to suit personal preference. This can be useful when using an external source. When the Auto Brightness Sensor is activated, it will automatically optimise the backlighting levels to suit ambient light conditions. a In the Advanced Picture Settings menu, press B or b to select Base Colour Adjustment and press OK.
English CONTROLS AND FEATURES DNR – Digital Noise Reduction Expert Picture Settings DNR allows you to “soften” the screen representation of a weak signal to reduce the noise effect. This feature is available when the Picture Mode option is Standard, Hollywood Day, Hollywood Night, and Hollywood Pro. a b Select DNR from the Noise Reduction menu. Test Pattern Press C or c to select Low, Middle, High, Auto or Off.
CONTROLS AND FEATURES English White Balance-Window Display This feature displays a special Window Pattern to be used when adjusting white balance with a measuring device. a In the Expert Picture Settings menu, press B or b to select White Balance and press OK. b Press B or b to select Window Display and press C or c to select On. c Press EXIT to close. White Balance-Setting Type You can choose from two types of White Balance adjustment.
English CONTROLS AND FEATURES Gamma Calibration Automatic Format (Widescreen) Toshiba has integrated picture calibration systems into its LCD televisions. Now you can enjoy the benefits of automatically calibrated gamma and white levels. In order to take advantage of these features the Toshiba colour analyzer TPA-1 is required.
CONTROLS AND FEATURES English Picture Position The picture position may be adjusted to suit personal preference and can be particularly useful for external inputs. NOTE: The Picture Position feature cannot be selected in the DTV mode. a In the Preferences menu, press B or b to select Display Settings and press OK. b Press B or b to select Picture Position.
English CONTROLS AND FEATURES Wireless LAN Information Bluetooth™ and Wireless LAN devices operate within the same radio frequency range and may interfere with one another. If you use Bluetooth™ and Wireless LAN devices simultaneously, you may occasionally experience a less than optimal network performance or even lose your network connection. If you should experience any such problem, immediately turn off either your Bluetooth™ or Wireless LAN device.
CONTROLS AND FEATURES Easy Setup using PBC (Push Button Configuration) You can select the Network Type. a In the Preferences menu, press B or b to select Network Setup and press OK. b Press B or b to select Wireless Setup and press OK. c Press B or b to select Easy Setup and press OK. a Press MENU / C c to highlight Setup icon. b Press B / C c to highlight Preferences icon and press OK. c Press B or b to select Network Setup and press OK.
English CONTROLS AND FEATURES b c NOTE: • Certain encryption types are only compatible with specific authentication types. - When Authentication is Open System, only WEP or None is compatible. - When Authentication is Shared Key, only WEP is compatible. - When Authentication is WPA-PSK or WPA2-PSK, only TKIP or AES is compatible.
CONTROLS AND FEATURES Advanced Network Setup Description Connected is displayed when the TV is connected with the AP. Disconnected is displayed when the TV is not connected with the AP.
English CONTROLS AND FEATURES d Highlight Auto Setup and press C or c to select Off. IP Address Setup Auto Setup Manual setup a In the Preferences menu, press B or b to select Network Setup and press OK. b Press B or b to select Advanced Network Setup and press OK. c Press B or b to select DNS Setup and press OK. d Press B or b to select Auto Setup and press C or c to select Off. Off IP Address xxx . xxx . xxx . xxx Subnet Mask xxx . xxx . xxx . xxx Default Gateway xxx .
CONTROLS AND FEATURES Input operation on the remote control: Button This function checks the Internet connectivity. a b Inputs the selected character. 0-9 Inputs the number directly. BbCc Moves the character highlight. CC cc Moves the cursor. Z A message will appear to indicate if the connection was successful or if it could not be completed. Moves the cursor to the head of a character string. z Moves the cursor to the end of a character string.
English CONTROLS AND FEATURES Network Device Setup • Time-out ( 60 seconds ) • When the EXIT button on the remote control is pressed Apps Control Profile Device Registration Setup The Apps function allows you to control the TV from network connected Apps (Tablet or Smartphone) like a remote control. Once a User Name has completed authentication, it is stored in the TV along with the password. The upper limit for the number of Use Names that can be remembered is 256.
CONTROLS AND FEATURES This function can be used to record and play digital broadcast programmes. Read the precautions below before recording or viewing programmes using the USB HDD record function. Media Renderer Setup The TV can be configured as a Media Renderer(DMR). When operating as a DMR, the TV displays content provided by a DMS. The selection of the media is done by DMC. The TV can play photo, movie, or audio files when operating as a DMR.
English CONTROLS AND FEATURES How to set recordings via the Programme Guide Setting up the USB HDD for recording To connect an USB HDD (not supplied): PLEASE NOTE USB1 or USB2 on the TV USB cable (not supplied) When a timed programme is about to start, an information screen will appear offering the option of watching or cancelling the programme. Other channels will not be available during the timed programme unless the programme timer is cancelled.
CONTROLS AND FEATURES a To programme the timer: a Press MENU / C c / B / C c to highlight TV Programmes / Genre Search icons and press OK to access the Genre Search screen. Genre Search 10:50 Tue, 6 Apr b Movies 34 AB1 Hard Rain 31 PARIS PREMIERE Red Corner c Wed,27 Apr 0:15- 1:45 Press MENU / C c / B / C c to highlight TV Programmes / Programme Timers icons and press OK. Select the unprogrammed column (blank column) and press OK. The Edit Timer menu will appear.
English CONTROLS AND FEATURES To schedule a programme using the information screen: a • As the displayed programme time is calculated from the actual recording information, it may not match the recording time on the USB HDD. Press , the information screen will appear giving details of the channel and programme currently being viewed.
CONTROLS AND FEATURES c Press B or b to select the title you want to view. A preview of the content selected can be seen on the preview screen. To protect or unprotect a recorded programme: To change the order in which the titles are listed, press the BLUE button. Select the title of the programme you want to protect and press the GREEN button. icon appears next to the title and the programme is protected. Press OK. Viewing starts. ● icon appears next to the title currently being recorded.
English CONTROLS AND FEATURES d USB HDD capacity You can check the remaining capacity of the USB HDD using Remaining Capacity. Recording Setup Select Device Thu, 17 Feb 10:00 Fri, 18 Feb 10:00 Fri, 18 Feb 10:00 Fri, 18 Feb 10:00 Sat, 18 Feb 10:00 Sun, 18 Feb 10:00 Sun, 18 Feb 10:00 Sun, 18 Feb 10:00 Mon, 18 Feb 10:00 Press B or b to select One Touch Recording Time. One Touch Recording Time 1235 ITV London Programme End Time ASTRA 19.
CONTROLS AND FEATURES a In the Recording Setup screen, press B or b to select Start Padding Time. b Press C or c to select a time. You can select from None, 3 minutes, 5 minutes, 10 minutes, 15 minutes, 30 minutes, and 45 minutes. Recording will start at the selected number of minutes prior to the recording start time. c Press B or b to select End Padding Time. d Press C or c to select a time. You can select from None, 3 minutes, 5 minutes, 10 minutes, 15 minutes, 30 minutes, and 45 minutes.
English CONTROLS AND FEATURES Using Toshiba Places Discover new, exciting possibilities with Toshiba Smart TV - because just watching television is a thing of the past! TV used to be: sit down, relax and watch television. Toshiba Smart TV today is: sit down, relax, watch television and much, much more! Enjoy new possibilities, such as surfing the Web, chatting, browsing social networks, photo communities, video portals, news, sports results...
CONTROLS AND FEATURES Using Skype The web browser on this TV lets you explore everything the web has to offer. Along with access to popular places, you'll be able to search for and browse your favorite sites. Skype-ready Toshiba TVs bring your family and friends closer to your home. Skype on your Toshiba TV allows you to share special moments no matter the distance. NOTE: • Certain services may not be currently available in your area. • Your registration or login may be required to use some services.
English CONTROLS AND FEATURES Getting started a b Press on the remote control, or press MENU / C c to highlight Toshiba Places icon and press OK. Press BbC c to select Skype icon and press OK. “Welcome to Skype” screen appears. Welcome to Skype Skype Name Press [OK] Password Press [OK] d You'll now be signed into your new account. NOTE: • Please ensure that you have entered your email address correctly. It is required in case you lose or forget your password.
CONTROLS AND FEATURES English Contact List Below is all icon pictures in conversation window. Press B or b to select Contact List tab. Press c/ B b to select a contact.
English CONTROLS AND FEATURES Status When pressing the GREEN button, the change status window is displayed as below. You can change your status by pressing the B or b button and then pressing OK. Exit by pressing the BACK button. You can send a contact request to a person displayed in the search results. Press B or b button to select a person and press OK.
CONTROLS AND FEATURES Icons Description English Each call has an icon with it. The meaning of each icon is as follows: Options Press B or b to select the Options tab and press OK. The Options page will appear.
English CONTROLS AND FEATURES Using Hybrid TV Standard (if available) Hybrid TV Standard enables the TV to receive HbbTV services. TV services which support this feature often show “press RED” on the screen. NOTE: You need to configure a home network before using this feature (see page 12). Using Intel® Wireless Display Intel® Wireless Display (Intel® WiDi) is supported on this TV. You can use your TV as second display for PC with Intel® Wireless Display. a b Press QUICK to open the Quick Menu.
CONTROLS AND FEATURES Exit Intel® Wireless Display by pushing the disconnect button on Intel® WiDi software or by pressing EXIT on the TV remote control. NOTE: If the PC has been inactive for some time, the Intel® WiDi connection will be disconnected automatically. Intel® Wireless Display Device Name The TV's Intel® Wireless Display device name can be changed. Using the Media Player This TV allows you to enjoy movie, music and photo files stored on a USB device connected to the USB port.
English CONTROLS AND FEATURES Basic operation Using Media Player with USB When Auto Start is enabled, you will be asked if you want to start the Media Player whenever a USB device is inserted. If Auto Start is disabled (or if you want to connect to a DMS on the network), you must manually start the Media Player from the menu. To select a file in the Multi View: a b Press Bb C c to select a file or folder. Press OK to move to the next layer, or press BACK to return to the previous layer.
CONTROLS AND FEATURES There are three types of viewing modes. Multi View (USB Photo) This view allows you to search for photos in a grid format. The pictures are displayed using thumbnail data in each image file. Single View In this mode, only files located in the selected directory will be displayed. This view allows you to change the photo content manually. When moving from Multi View to Single View, the currently selected photo will be displayed. a Press c to view the next photo.
English CONTROLS AND FEATURES To set Background Music (USB only): To select the playback mode from the Quick Menu: a a b Press QUICK to open the Quick Menu while in the Slide Show mode. Press B or b to select Background Music and press C or c to select On. The music file in the same folder as the displayed photo will start playing. b Press B or b to select Playback Mode and press OK. c Press B or b to select 2D Mode, 3D Mode 1 or 3D Mode 2. 2D Mode All photos are displayed in 2D.
CONTROLS AND FEATURES You can select movies from a Multi View of available files. Multi View (USB Movie) 5/9999 ///Folder name a b c Return xxxxxxxxx xxxxxxxxx.mpg xxxxxxxxx.mpg xxxxxxxxx.mpg xxxxxxxxx.mpg xxxxxxxxx.mpg xxxxxxxxx.mpg xxxxxxxxx.mpg xxxxxxxxx.mpg xxxxxxxxx.mpg xxxxxxxxx.mpg Press B b C c to select a file or folder. PU (or / ) Pu (or / ) buttons can be used to page up/down the Multi View when there are more files than will fit onto one screen. • Press W/w to pause.
English CONTROLS AND FEATURES Resume Play (USB only) To register your TV to a DivX® account: You can resume playback from where it was last stopped. This TV allows you to play back files purchased or rented from DivX® Video-On Demand (VOD) services. When you purchase or rent DivX® VOD files on the internet, you will be asked to enter a registration code. Press v while playing the movie to memorize the stopped position.
CONTROLS AND FEATURES • To play in fast reverse or fast forward directions, press CC or cc during playback. Each time you press the CC or cc, the playback speed will change. • This TV generates original chapter point in 10% increments for 10 chapters in total, that are accessible by using the Number buttons on the remote control. Playing music files (on a DLNA CERTIFIED™ Server or USB device) You can listen to music from a Multi View of available files.
English CONTROLS AND FEATURES Other features To set the repeat mode: a Press QUICK to open the Quick Menu. b Press B or b to select Repeat. c Press C or c to select Off, All or 1. Mode Description Off Files in the same folder are played back once. All Files in the same folder are repeatedly played back. 1 The same file is repeatedly played back. d Panel Lock Panel Lock disables the buttons on the television. All buttons on the remote control can still be used.
CONTROLS AND FEATURES On Timer The feature allows you to set the television to turn on automatically to a preset channel at a certain time of day or after a certain length of time. Programme Timers – digital only This feature will set the television to go to a specific channel at a certain time. It can be used to view a particular programme, or by setting the mode to daily or weekly, can be used to view a series of programmes. a b c d Press B / C c to highlight Programme Timers icon and press OK.
English CONTROLS AND FEATURES To cancel the On Timer: a In the On Timer menu, select Enable On Timer. b Press C or c to select Off. c Press B or b to highlight Done and press OK. Sleep Timer The television can be set to turn itself Off after a certain length of time. a Press MENU / C c to highlight Function icon. b Press B / C c to highlight Sleep Timer icon and press OK. c d e Use the number buttons to set the desired time.
CONTROLS AND FEATURES English Digital on-screen information To display More Information: When viewing in digital mode, the on-screen information and programme guide provide access to programme details for all available channels. a Press QUICK to open the Quick Menu. b Press b to highlight More Information and press OK. On-screen Information icons Information Icon a Press , the information screen will appear giving details of the channel and programme currently being viewed.
English CONTROLS AND FEATURES Using EPG (Electronic Programme Guide) You can choose the desired EPG system between the Broadcast Guide or MediaGuide that needs a internet connection. Genre selection/searching From the Guide screen, you can use the genre selection and search features. a b In the Guide screen, press QUICK. Press B or b to highlight Genre Colour in the Quick Menu and press OK.
CONTROLS AND FEATURES • Rovi Corporation and/or its subsidiaries and related affiliates are not in any way liable for the accuracy or availability of the program schedule information or other data in the Rovi Guide system and cannot guarantee service availability in your area. In no event shall Rovi Corporation and/or its related affiliates be liable for any damages in connection with the accuracy or availability of the program schedule information or other data in the Rovi Guide system.
English CONTROLS AND FEATURES Digital settings – parental control Parental Setup In order to prevent viewing of unsuitable films and programmes, channels and menus can be locked in digital mode. These can then only be accessed with a security code PIN. The Parental Control feature allows you to block programmes according to their rating levels. If a PIN has been set, you will need to enter it before adjusting the level. Parental PIN Setup a Press MENU / C c to highlight Setup icon.
CONTROLS AND FEATURES English Digital settings – Channel Options Skip channels This feature allows you to set channels that will be skipped when Pu or PU are used to tune. Selecting favourite channels a From the Quick Menu / Channel Options menu, it is possible to create a list of the digital channels that are watched most. Press LIST / C c to select the Favourite Channel list. b In the Quick Menu, press b to select Channel Options and press OK. c Press c repeatedly to highlight the skip (8) box.
English CONTROLS AND FEATURES Digital settings – other settings Subtitles In digital mode, this feature will show subtitles on the screen in the selected language provided they are being broadcast. a In the DTV Settings menu, press B or b to select Subtitle and Audio and press OK. b Press b to select Subtitle Display and press C or c to select On or Off.
CONTROLS AND FEATURES System Information and Reset TV Searching for New Software System Information If preferred, software upgrades can be searched for manually using Search for New Software. This feature can be used to check the version of software currently installed. When in DTV mode, it includes additional diagnostic information such as signal strength, signal quality, centre frequency, modulation, etc. a In the System Setup menu, press B or b to select Software Upgrade and press OK.
English CONTROLS AND FEATURES PC Settings Sampling Clock Adjusting the Sampling Clock alters the number of pulses per scan, this will clear vertical lines on the screen. Horizontal and Vertical Position Connect the PC (as shown in the ‘Connecting a computer’ section) and ensure that a picture is showing on the television screen. The picture position may now be adjusted to suit personal preference. a Press MENU / C c to highlight Setup icon. b Press B / C c to highlight Preferences icon and press OK.
CONTROLS AND FEATURES Labeling video input sources These input labels are shown in the input selector. You can label video inputs according to the devices you have connected to the TV. See page 8 for a detailed image showing recommended connections. Most media recorders and decoders send a signal through the SCART lead to switch the television to the correct Input socket. Alternatively, press the external source selection button o until the picture from connected equipment is shown.
English CONTROLS AND FEATURES Using HDMI CEC Control Digital Audio Output When connecting a surround sound amplifier to the digital audio output (Sony/Philips Digital Interface Format [S/PDIF]), the following options can be selected or adjusted. a b This is a new feature that uses CEC technology and allows you to control Toshiba HDMI CEC Control compatible devices from the television remote control via HDMI connection (page 10).
CONTROLS AND FEATURES When Amplifier Control is set to on/off the connected HDMI CEC Control amplifier. a In the HDMI CEC Control Setup menu, press b to highlight Amplifier Control. b Press C or c to select On or Off. Initial Speaker Setting The Initial Speaker Setting allows to select TV speakers or Amplifier speakers. a In the HDMI CEC Control Setup menu, press b to highlight Initial Speaker Setting. b Press C or c to select TV Speakers or Amplifier.
English TEXT SERVICES Text services Navigating pages using Auto This television has a multi-page text memory, which takes a few moments to load. It offers two Modes of viewing text – Auto will display Fastext, if available. List will save your four favourite pages. If Fastext is available, four coloured titles will appear at the base of the screen. To access one of the four given subjects, press the relevant coloured button on the remote control.
TEXT SERVICES English Control buttons Below is a guide to the functions of the remote control text buttons. k To display the index/initial page: Press k to access the index/initial page. The one displayed is dependant on the broadcaster. TEXT To display a page of text: Press TEXT to display text. Press again to superimpose text over a normal picture. Press again to return to normal television viewing. Channels cannot be changed until this has been done.
Questions and Answers Below are the answers to some of the most common queries. Sound Question Answer Why is there no sound or picture? Check the television is not in standby mode. Check the mains plug and all mains connections. Why is there a picture but no sound? Check all lead connections. No sound or unacceptable format sound may be received. Check the volume has not been turned down or that sound mute has not been selected. Check shared audio settings.
PROBLEM SOLVING Picture English Question Why are the colours wrong when an NTSC source is played? Answer Connect the source via a SCART lead and play. Select Colour System from the Setup menu. a Set the Colour to Auto and exit. b Go to the Picture menu and adjust the tint. Why don’t the controls of the television Check that Panel Lock is not On.
English PROBLEM SOLVING Question Answer Why are not 3D images displayed? Ensure that there is no object blocking the infrared signals in the infrared reception part of television and 3D glasses. If the infrared data communication between the television and 3D glasses is lost for 5 minutes, the power of 3D glasses is turned off. Why doesn’t the USB HDD work? Your country/area may not support the USB HDD function.
INFORMATION English Information Before connecting any external equipment, turn off all main power switches. If there is no switch, remove the mains plug from the wall socket. Signal information for Mini D-sub 15 pin connector Pin No. Signal name Pin No. Signal name Pin No.
English INFORMATION Acceptable video or PC signals through the HDMI terminals The HDMI inputs on this TV only accept VGA, SVGA, XGA, WXGA, and SXGA signal formats which are compliant with VESA as shown in the table below. Since some PCs and HDMI or DVI devices input signals which are different from the resolution and frequency described in the table below, the following phenomenon may occur; incorrect display, false format detection, picture position failure, blur, or judder.
INFORMATION English Media Player Supported Format Media Player Photo Media Format JPEG File Extention .jpg .jpeg Video codec Audio codec JPEG USB DMS yes yes – USB Data compatibility: JPEG Exif ver 2.2 Maximum viewable resolution: • JPEG 15360 × 8640 (Base-line) 1024 × 768 (Progressive) • BMP 9600 × 6400 Maximum number of files: 1000 / folder yes no – DMS Data compatibility: JPEG Exif ver 2.2 Maximum viewable resolution: 4096 × 4096 Maximum number of files: 1000/folder – MPO BMP .mpo .
English INFORMATION Media Player Movie Media Format File Extention Audio codec USB DMS MPEG-1/2 Layer2 yes MPEG-1/2 Layer3 Dolby Digital (AC-3) PCM ADPCM no MPEG-1 Video MPEG-2 Video MPEG-4 part2 H.264 (MPEG-4 AVC) MPEG-1/2 Layer2 yes MPEG-1/2 Layer3 Dolby Digital (AC-3) L-PCM MPEG-2/4 LC-AAC MPEG-4 HE-AAC no .flv .swf Sorenson H.263 (FLV1) H.264 (MPEG-4 AVC) MPEG-1/2 Layer3 MPEG-2/4 LC-AAC L-PCM ADPCM yes no .3gp MPEG-4 part2 H.
INFORMATION English 3D Support Format (HDMI) Resolution Aspect ratio V.Fraquency H.Fraquency Pixel Clock Frequency 3D Structure 720 × 480p 16:9 59.940/60.000Hz 31.469/31.500kHz 27.000/27.027MHz Side by Side (Full) Side by Side (Half) Top and Bottom 720 × 576p 16:9 50.000Hz 31.250kHz 27.000MHz Side by Side (Full) Side by Side (Half) Top and Bottom 1280 × 720p 16:9 59.940/60.000Hz 90.0/89.91kHz 148.352/148.500MHz Frame Packing 44.955/45.000kHz 74.176/74.
English INFORMATION 3D Support Format (DTV) Video Format Aspect ratio V.Fraquency 3D Structure 480i, 480p 16:9 59.940/60.000Hz Side by Side (Half) 576i, 576p 16:9 50.000Hz Side by Side (Half) 720p 16:9 59.940/60.000Hz Side by Side (Half) 50.000Hz Side by Side (Half) 59.940/60.000Hz Side by Side (Half) 50.000Hz Side by Side (Half) 24.000Hz Side by Side (Half) 30.000Hz Side by Side (Half) 50.000Hz Side by Side (Half) 59.940/60.
INFORMATION • • • • • • • Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. This product contains Adobe® Flash® Player software under license from Adobe Systems Incorporated. Copyright © 1995-2009 Adobe Systems Incorporated. All rights reserved.
English INFORMATION Cleaning the screen and cabinet… Turn off the power, and clean the screen and cabinet with a soft, dry cloth. We recommend that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage. Disposal… The following information is only for EU-member states: Disposal of products The crossed out wheeled dust bin symbol indicates that products must be collected and disposed of separately from household waste.
INFORMATION English Disclaimers 3D Information Available 3D glasses : Toshiba FPT-AG02G (Not supplied ) • The 3D function has been designed for private use and entertainment in your home environment. Please note that any commercial use of the 3D function could lead to copyright infringement of authors’ rights. Toshiba asks you to respect the intellectual property rights of third parties. About handling the 3D glasses • Do not leave the 3D glasses or the accessories within the reach of small children.
English INFORMATION Notes on handling the 3D glasses’ liquid crystal shutter lenses • Do not put excessive force on the lenses. • Do not scratch the surface of the lenses with sharp objects. • Do not drop or bend the 3D glasses. Notes on IR communication • Do not block the IR sensor for 3D glasses on the TV by placing objects in front of it. • Do not cover the IR sensor on the 3D glasses with stickers or labels. • Keep the IR sensor on the 3D glasses clean.
INFORMATION English Specifications and accessories Receiving systems DVB-T Broadcast systems/channels UK UHF 21-68 Broadcast systems/channels PAL-I UHF UK21-UK69 France VHF 05-10 (VHF 01-05) UHF 21-69 PAL-B/G UHF E21-E69 VHF E2-E12, S1-S41 Germany VHF 05-12 UHF 21-69 SECAM-L UHF F21-F69 VHF F1-F10, B-Q Austria VHF 05-12 UHF 21-69 SECAM-D/K UHF R21-R69 VHF R1-R12 Switzerland VHF 05-12 UHF 21-69 Italy VHF 05-12 (D,E,F,G,H,H1,H2) UHF 21-69 Spain UHF 21-69 40TL 46TL Standby power consumption
© TOSHIBA Television Central Europe Sp. z o.o. All rights reserved. Reproduction in whole or part without written permission is strictly prohibited. TOSHIBA Television Central Europe Sp. z o.o. ul.
