Operation Manual

67
CONTROLS AND FEATURES
English
Adjusting the Sampling Clock alters the number of pulses per
scan, this will clear vertical lines on the screen.
a In the Display Settings menu, press B or b to select
PC Settings and press OK.
b Press B or b to select Sampling Clock.
c Press C or c to adjust until the picture clears.
Use Reset to return all items to the original factory settings.
a In the Display Settings menu, press B or b to select
PC Settings and press OK.
b Press B or b to select Reset and press OK.
NOTE: When a PC is connected using HDMI, none of these
functions will be available.
The screen is disrupted momentarily when adjusting PC
Settings. This is not a sign of malfunction.
The default settings and adjustment ranges may vary
depending on the input signal format.
Input selection and AV
connections
See page 9 for a detailed image showing
recommended connections.
Most media recorders and decoders send a signal through the
SCART lead to switch the television to the correct Input socket.
Alternatively, press the external source selection button
o
until the picture from connected equipment is shown.
Use the Input Selection window if the television does not switch
over automatically.
a By pressing o on the remote control or TV, a list will
appear on screen showing all inputs and external
equipment.
HDMI® displays equipment connected to Input HDMI
on the back or side of the television.
PC displays a computer connected to Input RGB/PC on
the back of the television.
Sampling Clock
Reset
Input selection
TV
1
2
HDMI 2
HDMI 1
PC
HDMI 3
HDMI 4
Inputs
DTV Ant
DTV Sat
ATV
1
2
HDMI 2
HDMI 1
PC
HDMI 3
HDMI 4
Inputs
Press o on the remote
control
Press and hold p / o
on the TV