Manual

Initial Setup
When you first turn on or reset the TV, the Initial Setup
window will appear.
1 In the Menu Language field, press < or • to select
your preferred language.
2 Press • or • to select Time Zone and set your
desired time zone with < or • and press @.
3 Next, the Location setting window will appear.
For normal home use, press "<or • to select Home and
press @.
4 Next, ANT/CABLE In setup window will appear.
Press < or • to select the input source (Cable or
Antenna) for the ANT/CABLE input on the TV.
5 If you select Antenna, the Channel Tuning Mode
setup window will appear. To tune only digital
channels, select Digital. To tune digital channels
preferentially over analog when entering channel
number directly, select Auto. For normal tuning,
select Standard. Press @ to continue to Auto
Tuning.
6 Press @ to select Start Scan and continue with the
Auto Tuning.
You can stop the Initial Setup with E_S. However if you
do not finish the entire Initial Setup process, the Initial
Setup window will appear every time you turn on the
TV.
QuickSetupfromthe SETUPmenu
You can conveniently change various basic TV settings
from the Quick Setup item located under the SETUP
menu.
1 Press M_u to open the SETUP menu.
2 Press • or • to select Quick Setup and press _.
3 A confirmation message will appear on the screen,
press < or • to select Yes and press _.
4 Other procedures are the same as Initial Setup
(_ left-hand column).
Selectingthe menulanguage
You can choose from three different languages (English,
Frangais and Espafiol) for the on-screen display of
menus and messages.
1 From the SETUP menu, highlight Menu
Language.
2 Press <or • toselectyourpreferredmenu
language.
27
XV648U 08005. pdf 1 2009/07/t 0 1t :01:23